# 14mm, 12-point socket needed \*Brampton/Mississauga area\* **URL:** \ **Category:** SON240sx Automotive\ **Created:** [October 11, 2005, 11:27am UTC](https://forums.speedlife.net/t/14mm-12-point-socket-needed-brampton-mississauga-area/89347 "2005-10-11T11:27:32Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![Gonad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gonad/32/5481_2.png) [@Gonad](https://forums.speedlife.net/u/Gonad)\ **Post date:** [October 11, 2005, 11:27am UTC](https://forums.speedlife.net/t/14mm-12-point-socket-needed-brampton-mississauga-area/89347/1 "2005-10-11T11:27:32Z")
Anyone got one in the Brampton area? I can come pick it up after 6pm this week. Let me know. Thanks, ---
**Author:** ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)\ **Post date:** [October 11, 2005, 1:11pm UTC](https://forums.speedlife.net/t/14mm-12-point-socket-needed-brampton-mississauga-area/89347/2 "2005-10-11T13:11:14Z")
I had a hell of a time finding a 12 point 14mm socket @ the shop to remove/install my Flywheel… It came off without to much trouble (finished off a cheap-o 12pt socket thou). Install was easier then removing it cause I found a mint 12pt but that was after looking for it for hours :roll: ---
**Author:** ![Gonad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gonad/32/5481_2.png) [@Gonad](https://forums.speedlife.net/u/Gonad)\ **Post date:** [October 11, 2005, 1:18pm UTC](https://forums.speedlife.net/t/14mm-12-point-socket-needed-brampton-mississauga-area/89347/3 "2005-10-11T13:18:32Z")
Erm, Ok. Thanks, I think. 😕 > [@Jedi\_Car\_Fan](#): > > I had a hell of a time finding a 12 point 14mm socket @ the shop to remove/install my Flywheel… > > It came off without to much trouble (finished off a cheap-o 12pt socket thou). Install was easier then removing it cause I found a mint 12pt but that was after looking for it for hours :roll: ---
**Author:** ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)\ **Post date:** [October 11, 2005, 1:22pm UTC](https://forums.speedlife.net/t/14mm-12-point-socket-needed-brampton-mississauga-area/89347/4 "2005-10-11T13:22:07Z")
LOL… yea you can borrow it if you want to drive to Kitchener… 12 point is a bitch thou… what happened to gettng those 14mm new bolts etc instead of using the 12 point ones ? Depending on how close Princess Auto is to too… go buy a brand new one so its in good shape… 12points are easy to wreck so having new ones are always nice ---
**Author:** ![Gonad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gonad/32/5481_2.png) [@Gonad](https://forums.speedlife.net/u/Gonad)\ **Post date:** [October 11, 2005, 1:54pm UTC](https://forums.speedlife.net/t/14mm-12-point-socket-needed-brampton-mississauga-area/89347/5 "2005-10-11T13:54:31Z")
Well I have to have the socket to take my existing 12pt ones off first right? ---
**Author:** ![face](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/face/32/5504_2.png) [@face](https://forums.speedlife.net/u/face)\ **Post date:** [October 11, 2005, 1:56pm UTC](https://forums.speedlife.net/t/14mm-12-point-socket-needed-brampton-mississauga-area/89347/6 "2005-10-11T13:56:27Z")
no idea what kinda torque we’re talking about here, but i guess you already tried to take it off with a wrench? ---
**Author:** ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)\ **Post date:** [October 11, 2005, 1:58pm UTC](https://forums.speedlife.net/t/14mm-12-point-socket-needed-brampton-mississauga-area/89347/7 "2005-10-11T13:58:26Z")
^^^ oh yea… I ended up using a wrench to remove few after the 1st socket woofed its cookies on me :lol: ---
**Author:** ![Gonad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gonad/32/5481_2.png) [@Gonad](https://forums.speedlife.net/u/Gonad)\ **Post date:** [October 11, 2005, 1:58pm UTC](https://forums.speedlife.net/t/14mm-12-point-socket-needed-brampton-mississauga-area/89347/8 "2005-10-11T13:58:26Z")
I’m not even going to attempt with a wrench. My KA were a bitch to remove with the shaft spinning (and I’m not gonna boot leg it to hold it in place). I have an impact gun so I may as well wait until I have a socket. Oh, and if I happen to break a socket (unlikely) with the gun, I’ll give you a full replacement. ---
**Author:** ![face](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/face/32/5504_2.png) [@face](https://forums.speedlife.net/u/face)\ **Post date:** [October 11, 2005, 2:01pm UTC](https://forums.speedlife.net/t/14mm-12-point-socket-needed-brampton-mississauga-area/89347/9 "2005-10-11T14:01:57Z")
wtf is woofed its cookies ---
**Author:** ![Gonad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gonad/32/5481_2.png) [@Gonad](https://forums.speedlife.net/u/Gonad)\ **Post date:** [October 11, 2005, 2:05pm UTC](https://forums.speedlife.net/t/14mm-12-point-socket-needed-brampton-mississauga-area/89347/10 "2005-10-11T14:05:34Z")
> [@brianphung](#): > > wtf is woofed its cookies I dunno but it sounds pretty homosexual. Back to topic. ---
**Author:** ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)\ **Post date:** [October 11, 2005, 2:12pm UTC](https://forums.speedlife.net/t/14mm-12-point-socket-needed-brampton-mississauga-area/89347/11 "2005-10-11T14:12:07Z")
term i used while racing mx when my suzuki’s would blow bottom ends left and right cause they were pieces of shit ---
**Author:** ![Gonad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gonad/32/5481_2.png) [@Gonad](https://forums.speedlife.net/u/Gonad)\ **Post date:** [October 12, 2005, 6:47am UTC](https://forums.speedlife.net/t/14mm-12-point-socket-needed-brampton-mississauga-area/89347/12 "2005-10-12T06:47:51Z")
Ok, my dad has a 14mm 12pt socket at his work. Once again he comes through. :bowdown: ---
**Author:** ![Gonad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gonad/32/5481_2.png) [@Gonad](https://forums.speedlife.net/u/Gonad)\ **Post date:** [October 12, 2005, 5:25pm UTC](https://forums.speedlife.net/t/14mm-12-point-socket-needed-brampton-mississauga-area/89347/13 "2005-10-12T17:25:15Z")
eBay electric impact gun ftw. :run: Teh locked.