# 16'' Volk TE37s
**URL:** https://forums.speedlife.net/t/16-volk-te37s/129182
**Category:** Classifieds
**Created:** [October 29, 2009, 6:07am UTC](https://forums.speedlife.net/t/16-volk-te37s/129182 "2009-10-29T06:07:57Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)
#### Post date: [October 29, 2009, 6:07am UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/1 "2009-10-29T06:07:57Z")
For sale is a set of 4 Bolt (4x114.3) 16’’ Volk TE37s. Fronts are 7’’ +33 and the Rears are 8’’ +38
Two of the Rims had very minor curb rash and as I had plans to powder coat them I had repaired the curb rash but never got around to coating them or even using them. So the two rims would either have to be used as is or touched up etc…
Asking $800 AS IS or $900 Powder Coated any single stage colour I have in stock. Not interested in trades and will not take less then $800 so don’t bother offering me less as I’ll ignore it.
Rims are located in Kitchener for pickup only.
---
### Author:  [@ronnie416](https://forums.speedlife.net/u/ronnie416)
#### Post date: [October 29, 2009, 7:14am UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/2 "2009-10-29T07:14:12Z")
Jesus. Can you magically drill them into 5 bolt and make them appear on my car with some 30mm spacers?
Hahahah.
This is a steal for some of the THE best wheels known to mankind. I so wish I was 4 bolt.
---
### Author:  [@Canadian\_Idol](https://forums.speedlife.net/u/Canadian_Idol)
#### Post date: [October 29, 2009, 9:05am UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/3 "2009-10-29T09:05:40Z")
Amazing deal…I’ll own a set one day. Unfortunately the size I need cost this much…per WHEEL.
---
### Author:  [@NewfoundlandDude](https://forums.speedlife.net/u/NewfoundlandDude)
#### Post date: [October 29, 2009, 9:32am UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/4 "2009-10-29T09:32:05Z")
Thread jack, but I’ve considered selling/trading my 2 front TE37’s for some more concave TE37’s. 18x8.5 +30 5x114.3
They’ve got a brand new set of 245/40/18 Sumitomo HTR-Z III’s on them.
Unfortunately, the powdercoat got knicked when I got the tires installed, so I’m trying to get the owner to get them repaired…
If either of you are looking for 18’s, shoot me a pm.
Honestly haven’t seriously looked into replacing them, but I’ve randomly considered it a few times. Would have to check it out.
Also have some Hankook RS-2’s 235/40/18 that I could work in there.
These babies.
---
### Author:  [@p-dizzle](https://forums.speedlife.net/u/p-dizzle)
#### Post date: [November 2, 2009, 8:14pm UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/5 "2009-11-02T20:14:04Z")
Are the bronze TE37’s still for sale?
---
### Author:  [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)
#### Post date: [November 2, 2009, 8:22pm UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/6 "2009-11-02T20:22:07Z")
> [@What would you do with a free 30k?](https://forums.speedlife.net/t/what-would-you-do-with-a-free-30k/24617/42):
>
> Are the bronze TE37’s still for sale?
Yes
---
### Author:  [@white240](https://forums.speedlife.net/u/white240)
#### Post date: [November 3, 2009, 7:00am UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/7 "2009-11-03T07:00:55Z")
> [@Help me pick out some wheels for the GT](https://forums.speedlife.net/t/help-me-pick-out-some-wheels-for-the-gt/24558/19):
>
> Thread jack, but I’ve considered selling/trading my 2 front TE37’s for some more concave TE37’s. 18x8.5 +30 5x114.3
>
> They’ve got a brand new set of 245/40/18 Sumitomo HTR-Z III’s on them.
> Unfortunately, the powdercoat got knicked when I got the tires installed, so I’m trying to get the owner to get them repaired…
>
> If either of you are looking for 18’s, shoot me a pm.
> Honestly haven’t seriously looked into replacing them, but I’ve randomly considered it a few times. Would have to check it out.
> Also have some Hankook RS-2’s 235/40/18 that I could work in there.
>
> These babies.
No offense… but get the fuck out. “thread jack” doesn’t make it alright. Make your own thread.
---
### Author:  [@NewfoundlandDude](https://forums.speedlife.net/u/NewfoundlandDude)
#### Post date: [November 3, 2009, 7:12am UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/8 "2009-11-03T07:12:36Z")
^^ I like how butt hurt you got over that…😛
Got it, my bad. GLWS Jedi\_Car\_Fan.
---
### Author:  [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)
#### Post date: [November 8, 2009, 6:29pm UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/9 "2009-11-08T18:29:30Z")
Bump
---
### Author:  [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)
#### Post date: [November 17, 2009, 2:01pm UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/10 "2009-11-17T14:01:07Z")
Bump
---
### Author:  [@Driftin-RPS13](https://forums.speedlife.net/u/Driftin-RPS13)
#### Post date: [November 17, 2009, 10:34pm UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/11 "2009-11-17T22:34:52Z")
i wish i had some funds for these rims. defiantly a good deal here. glws
---
### Author:  [@ronnie416](https://forums.speedlife.net/u/ronnie416)
#### Post date: [November 18, 2009, 8:29pm UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/12 "2009-11-18T20:29:35Z")
I keep magically willing them to be 5 bolt the next time I click on the post. hahah.
---
### Author:  [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)
#### Post date: [November 29, 2009, 5:59am UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/13 "2009-11-29T05:59:55Z")
Bump
---
### Author:  [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)
#### Post date: [December 13, 2009, 9:58am UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/14 "2009-12-13T09:58:03Z")
Bump
---
### Author:  [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)
#### Post date: [December 21, 2009, 3:50pm UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/15 "2009-12-21T15:50:20Z")
Bump
---
### Author:  [@BoOsT-HuNgRy](https://forums.speedlife.net/u/BoOsT-HuNgRy)
#### Post date: [December 21, 2009, 5:08pm UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/16 "2009-12-21T17:08:52Z")
do you have pic of these exsact wheels on a s13?
---
### Author:  [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)
#### Post date: [December 28, 2009, 7:31am UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/17 "2009-12-28T07:31:52Z")
Here are a few pictures to give people an idea of they fit/look on the car.
---
### Author:  [@S13GG](https://forums.speedlife.net/u/S13GG)
#### Post date: [December 28, 2009, 7:55am UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/18 "2009-12-28T07:55:04Z")
^yeah perfect…
16" with enough rubber to have proper bump absorption through the tire… less harsh ride than 17" w/really low pro
---
### Author:  [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)
#### Post date: [January 4, 2010, 7:10am UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/19 "2010-01-04T07:10:32Z")
Bump
---
### Author:  [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)
#### Post date: [January 11, 2010, 7:17am UTC](https://forums.speedlife.net/t/16-volk-te37s/129182/20 "2010-01-11T07:17:38Z")
Bump
u
m
p
[Next page](https://forums.speedlife.net/t/16-volk-te37s/129182.md?page=2)