# 17" 4 Lug wheels. 5 spoke.
**URL:** https://forums.speedlife.net/t/17-4-lug-wheels-5-spoke/152414
**Category:** Classifieds
**Created:** [March 29, 2010, 9:27pm UTC](https://forums.speedlife.net/t/17-4-lug-wheels-5-spoke/152414 "2010-03-29T21:27:19Z")
**Posts on this page:** 13
**Page:** 1
### Author:  [@travisn](https://forums.speedlife.net/u/travisn)
#### Post date: [March 29, 2010, 9:27pm UTC](https://forums.speedlife.net/t/17-4-lug-wheels-5-spoke/152414/1 "2010-03-29T21:27:19Z")
Tenzo R Passion 5 wheels. I bought these new in 04.
17x7
(2)215-40/17 with Nankang Sport Ns1 Tires. One is worn on the inside
(2)205-40/17 with Khumo Estca
One wheel has _slight_ dent
34lbs per wheel&tire
DISCLAIMER: these are not the tires on the rims currently and yes I know the car full of picard
wheels are in batavia. i can get better pics if interested
350 obo.
---
### Author:  [@travisn](https://forums.speedlife.net/u/travisn)
#### Post date: [April 4, 2010, 6:06am UTC](https://forums.speedlife.net/t/17-4-lug-wheels-5-spoke/152414/2 "2010-04-04T06:06:45Z")
$300
---
### Author:  [@Mr\_T](https://forums.speedlife.net/u/Mr_T)
#### Post date: [April 4, 2010, 9:47pm UTC](https://forums.speedlife.net/t/17-4-lug-wheels-5-spoke/152414/3 "2010-04-04T21:47:57Z")
how bad is the dent?
---
### Author:  [@travisn](https://forums.speedlife.net/u/travisn)
#### Post date: [April 5, 2010, 4:49am UTC](https://forums.speedlife.net/t/17-4-lug-wheels-5-spoke/152414/4 "2010-04-05T04:49:15Z")
its really not that bad. Ill get a picture of it tonight…
---
### Author:  [@travisn](https://forums.speedlife.net/u/travisn)
#### Post date: [April 7, 2010, 7:08pm UTC](https://forums.speedlife.net/t/17-4-lug-wheels-5-spoke/152414/5 "2010-04-07T19:08:45Z")
here ya go. tiny dent. (right under the word ‘rotation’)
[](http://img413.imageshack.us/i/img0494li.jpg/) [](http://img684.imageshack.us/i/img0495r.jpg/) [](http://img18.imageshack.us/i/img0497ab.jpg/) [](http://img89.imageshack.us/i/img0496p.jpg/)
---
### Author:  [@klug](https://forums.speedlife.net/u/klug)
#### Post date: [April 7, 2010, 8:12pm UTC](https://forums.speedlife.net/t/17-4-lug-wheels-5-spoke/152414/6 "2010-04-07T20:12:10Z")
I see no picard with your car :shrug: I like the wheels if my build budget calls for it I may have to pick these up.
---
### Author:  [@Mr\_T](https://forums.speedlife.net/u/Mr_T)
#### Post date: [April 7, 2010, 8:24pm UTC](https://forums.speedlife.net/t/17-4-lug-wheels-5-spoke/152414/7 "2010-04-07T20:24:33Z")
will all 4 tires pass inspection?
---
### Author:  [@travisn](https://forums.speedlife.net/u/travisn)
#### Post date: [April 8, 2010, 3:43am UTC](https://forums.speedlife.net/t/17-4-lug-wheels-5-spoke/152414/8 "2010-04-08T03:43:55Z")
> [@klug](#):
>
> I see no picard with your car :shrug: I like the wheels if my build budget calls for it I may have to pick these up.
a lot of bondo, a bit of rice, 4x4 wheel gap. I hated it as soon as it was finished. lol
> [@Mr. T](#):
>
> will all 4 tires pass inspection?
ill check tonight.
---
### Author:  [@greddy420a](https://forums.speedlife.net/u/greddy420a)
#### Post date: [April 8, 2010, 3:59pm UTC](https://forums.speedlife.net/t/17-4-lug-wheels-5-spoke/152414/9 "2010-04-08T15:59:36Z")
pm’d
---
### Author:  [@travisn](https://forums.speedlife.net/u/travisn)
#### Post date: [April 8, 2010, 4:24pm UTC](https://forums.speedlife.net/t/17-4-lug-wheels-5-spoke/152414/10 "2010-04-08T16:24:44Z")
> [@Mr. T](#):
>
> will all 4 tires pass inspection?
possibly: (numbers are in 32nds) (first and last measurement are taken about a half inch in, first measurement is the outside)
1. 3, 6, 4, 2 (has a small part where there is basically no tread in between the 4 and 2 measurement, not worn through or anything though) (this one has the ding)
2. 4, 7, 6, 3
3. 3, 7, 7, 5
4. 5, 8, 8, 5
not sure of the offset. I can measure it sunday (tires are not at my house and I am busy till sunday)
---------- Post added at 07:24 PM ---------- Previous post was at 07:18 PM ----------
It should pass per the tire tread design (see bold/italic)
> [@NYS DMV](#):
>
> (c) Tires
>
> Procedure:
>
> 1. Tire tread depth readings shall be taken in
> two adjacent major grooves showing the
> most tread wear. **_Re__adings for a tire which
> has the tread design running across the tire or
> for a siped tire where such tread design is
> permitted, shall be taken at or near the center
> of the tire._** Inspect all tires mounted on
> vehicles (do not inspect spare tire).
>
> Reject if:
>
> 1. Any tire is worn to less than 2/32 of an
> inch of major tread design at the two worst
> adjacent points, at which the gauge readings
> are obtained.
[www.nysdmv.com/forms/cr79UP.pdf](http://www.nysdmv.com/forms/cr79UP.pdf)
---
### Author:  [@Mr\_T](https://forums.speedlife.net/u/Mr_T)
#### Post date: [April 19, 2010, 11:02am UTC](https://forums.speedlife.net/t/17-4-lug-wheels-5-spoke/152414/11 "2010-04-19T11:02:45Z")
still around?
---
### Author:  [@travisn](https://forums.speedlife.net/u/travisn)
#### Post date: [April 19, 2010, 5:49pm UTC](https://forums.speedlife.net/t/17-4-lug-wheels-5-spoke/152414/12 "2010-04-19T17:49:37Z")
sure are!
---
### Author:  [@travisn](https://forums.speedlife.net/u/travisn)
#### Post date: [April 21, 2010, 6:14pm UTC](https://forums.speedlife.net/t/17-4-lug-wheels-5-spoke/152414/13 "2010-04-21T18:14:25Z")
bumpski time