# 180SX Kouki Tail Conversion

**URL:** <https://forums.speedlife.net/t/180sx-kouki-tail-conversion/109712>\
**Category:** SON240sx Automotive\
**Created:** [September 23, 2007, 4:19am UTC](https://forums.speedlife.net/t/180sx-kouki-tail-conversion/109712 "2007-09-23T04:19:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ARC240](https://avatars.discourse-cdn.com/v4/letter/a/d26b3c/32.png) [@ARC240](https://forums.speedlife.net/u/ARC240)\
**Post date:** [September 23, 2007, 4:19am UTC](https://forums.speedlife.net/t/180sx-kouki-tail-conversion/109712/1 "2007-09-23T04:19:15Z")

</div>

Hey guys, I was just looking for some advice as to what would be involved in swapping the 180SX tails into a 92’ 240SX. I’m very interested in this light change and I wanted to know a little bit more about before I go ahead and order everything. I hear there’s a lot of wiring to be done, but was looking for input from people who have experience with this swap. How hard is it exactly? Does anyone know where to get some wiring diagrams? What else besides rewiring do you need to do? Any help would be great,  
Thanks!😃

---

<div class="post-metadata">

**Author:** ![S13GG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s13gg/32/5506_2.png) [@S13GG](https://forums.speedlife.net/u/S13GG)\
**Post date:** [September 23, 2007, 8:02am UTC](https://forums.speedlife.net/t/180sx-kouki-tail-conversion/109712/2 "2007-09-23T08:02:57Z")

</div>

![[http://www.passwordjdm.com/popuplargeimage.asp?strImage=764.jpg&strImageType=product&strPageTitle=JDM](http://www.passwordjdm.com/popuplargeimage.asp?strImage=764.jpg&strImageType=product&strPageTitle=JDM) S13 180sx Center Tail Light]([http://www.passwordjdm.com/popuplargeimage.asp?strImage=764.jpg&strImageType=product&strPageTitle=JDM](http://www.passwordjdm.com/popuplargeimage.asp?strImage=764.jpg&strImageType=product&strPageTitle=JDM) S13 180sx Center Tail Light)

^direct replacment, 4 nuts…IIRC? $50-$125

![http://www.importzrevolution.com/sitebuildercontent/sitebuilderpictures/import-store_1882_522359643.gif](http://www.importzrevolution.com/sitebuildercontent/sitebuilderpictures/import-store_1882_522359643.gif)

^3 lamps, 10/12 nuts, 1 piece of metal (slightly different shape) 6/8 nuts? $400-$600?

even pressure to remove taillamps, the bytol has quite a bite of resistance holding the lamps on and water out