# 1927 Ford Ratrod **URL:** \ **Category:** Classifieds\ **Created:** [February 22, 2016, 5:23pm UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644 "2016-02-22T17:23:43Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![steve2k1116](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/steve2k1116/32/5230_2.png) [@steve2k1116](https://forums.speedlife.net/u/steve2k1116)\ **Post date:** [February 22, 2016, 5:23pm UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/1 "2016-02-22T17:23:43Z")
I honestly don’t know much about this thing, but its pretty wild. Its my dads and his contact info is below if you’re interested please feel free to give him a call. Its his 1927 Ford Ratrod. Thing has a lot of work done to it and like I said I don’t know many of the specifics but I do know it has a Dodge 340 V8 small block, power glide transmission, Ford 9" rear end, disk brakes all around, z frame, rear coilovers etc. It does run, has all the major stuff done to it, with some tlc you could make this thing pretty sweet. Asking $8,000 obo. Feel free to contact my dad below or leave comments and such and I’ll pass them along or do my best to help. Thanks! Steve Bueme 716-523-one seven four five [![http://i120.photobucket.com/albums/o163/steve2k1116/IMG_3483_zpsu47mxmq0.jpg](http://i120.photobucket.com/albums/o163/steve2k1116/IMG_3483_zpsu47mxmq0.jpg)](http://s120.photobucket.com/user/steve2k1116/media/IMG_3483_zpsu47mxmq0.jpg.html) [![http://i120.photobucket.com/albums/o163/steve2k1116/IMG_3481_zpsf8bizvq6.jpg](http://i120.photobucket.com/albums/o163/steve2k1116/IMG_3481_zpsf8bizvq6.jpg)](http://s120.photobucket.com/user/steve2k1116/media/IMG_3481_zpsf8bizvq6.jpg.html) [![http://i120.photobucket.com/albums/o163/steve2k1116/IMG_3484_zpsqppxhxwb.jpg](http://i120.photobucket.com/albums/o163/steve2k1116/IMG_3484_zpsqppxhxwb.jpg)](http://s120.photobucket.com/user/steve2k1116/media/IMG_3484_zpsqppxhxwb.jpg.html) [![http://i120.photobucket.com/albums/o163/steve2k1116/IMG_3482_zpsk94vympy.jpg](http://i120.photobucket.com/albums/o163/steve2k1116/IMG_3482_zpsk94vympy.jpg)](http://s120.photobucket.com/user/steve2k1116/media/IMG_3482_zpsk94vympy.jpg.html) ---
**Author:** ![XwalkerX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xwalkerx/32/7598_2.png) [@XwalkerX](https://forums.speedlife.net/u/XwalkerX)\ **Post date:** [February 22, 2016, 6:02pm UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/2 "2016-02-22T18:02:12Z")
this thing would be fucking awesome with like 3’ lopped off the frame ---
**Author:** ![joelster](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/joelster/32/7258_2.png) [@joelster](https://forums.speedlife.net/u/joelster)\ **Post date:** [February 22, 2016, 6:10pm UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/3 "2016-02-22T18:10:56Z")
I think I’ve seen it before near the road. Is it out by Lyndonville? ---
**Author:** ![steve2k1116](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/steve2k1116/32/5230_2.png) [@steve2k1116](https://forums.speedlife.net/u/steve2k1116)\ **Post date:** [February 22, 2016, 6:15pm UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/4 "2016-02-22T18:15:34Z")
> [@XwalkerX](#): > > this thing would be fucking awesome with like 3’ lopped off the frame Agreed. Definitely a lot of potential. I’ve thought about it but I don’t have the time nor know how to take on a project of this size. > [@joelster](#): > > I think I’ve seen it before near the road. Is it out by Lyndonville? Nope. It’s at my parents house under a cover. ---
**Author:** ![2TurboZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/2turboz/32/7577_2.png) [@2TurboZ](https://forums.speedlife.net/u/2TurboZ)\ **Post date:** [February 22, 2016, 6:40pm UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/5 "2016-02-22T18:40:13Z")
Cool ---
**Author:** ![Mankthetank19](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mankthetank19/32/5295_2.png) [@Mankthetank19](https://forums.speedlife.net/u/Mankthetank19)\ **Post date:** [February 23, 2016, 5:05am UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/6 "2016-02-23T05:05:27Z")
Pretty dope vehicle. ---
**Author:** ![LUC1F3R](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/luc1f3r/32/7299_2.png) [@LUC1F3R](https://forums.speedlife.net/u/LUC1F3R)\ **Post date:** [February 23, 2016, 8:29am UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/7 "2016-02-23T08:29:10Z")
i would buy this in a heartbeat and throw a 5.3l with like a 101mm turbo on it if i wasn’t buying a house ☹ ---
**Author:** ![maxwell](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/maxwell/32/6524_2.png) [@maxwell](https://forums.speedlife.net/u/maxwell)\ **Post date:** [February 23, 2016, 8:41am UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/8 "2016-02-23T08:41:15Z")
Interesting. GLWS ---
**Author:** ![Matt\_Danger](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/matt_danger/32/4981_2.png) [@Matt\_Danger](https://forums.speedlife.net/u/Matt_Danger)\ **Post date:** [February 23, 2016, 10:31am UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/9 "2016-02-23T10:31:25Z")
Super cool! There are a few rat rod facebook groups that are pretty active and also [killbillet.com](http://killbillet.com) that might be a good place to list ---
**Author:** ![XwalkerX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xwalkerx/32/7598_2.png) [@XwalkerX](https://forums.speedlife.net/u/XwalkerX)\ **Post date:** [February 23, 2016, 10:52am UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/10 "2016-02-23T10:52:12Z")
> **[The H.A.M.B.](https://www.jalopyjournal.com/forum/)** > > Spreading the gospel of traditional hot rods and customs to hoodlums worldwide. ---
**Author:** ![steve2k1116](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/steve2k1116/32/5230_2.png) [@steve2k1116](https://forums.speedlife.net/u/steve2k1116)\ **Post date:** [February 23, 2016, 11:10am UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/11 "2016-02-23T11:10:03Z")
Thanks boys. It’s going on Craigslist next then eBay. Don’t feel like joining a bunch of forums to sell it. It’s priced pretty aggressively so shouldn’t be to hard. Dads looking to move it for Ferrari mods money. Help him out! ---
**Author:** ![XwalkerX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xwalkerx/32/7598_2.png) [@XwalkerX](https://forums.speedlife.net/u/XwalkerX)\ **Post date:** [February 23, 2016, 12:33pm UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/12 "2016-02-23T12:33:22Z")
fuck a SBC someone should put this wild thing in it > **[Gmc 702 cubic inch V12 Engine | eBay](https://www.ebay.com/itm/291689821619?ru=http%253A%252F%252Fwww.ebay.com%252Fsch%252Fi.html%253F_from%253DR40%2526_sacat%253D0%2526_nkw%253D291689821619%2526_rdc%253D1)** > > Find many great new & used options and get the best deals for Gmc 702 cubic inch V12 Engine at the best online prices at eBay! Free shipping for many products! ![http://i.ebayimg.com/images/g/sWMAAOSwKtVWyR3u/s-l1600.jpg](http://i.ebayimg.com/images/g/sWMAAOSwKtVWyR3u/s-l1600.jpg) ---
**Author:** ![maxwell](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/maxwell/32/6524_2.png) [@maxwell](https://forums.speedlife.net/u/maxwell)\ **Post date:** [February 23, 2016, 12:45pm UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/13 "2016-02-23T12:45:46Z")
Theres enough room for it, @XwalkerX ---
**Author:** ![Spam16v](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spam16v/32/5287_2.png) [@Spam16v](https://forums.speedlife.net/u/Spam16v)\ **Post date:** [February 23, 2016, 1:17pm UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/14 "2016-02-23T13:17:51Z")
In-fucking-possible to get parts for that stationary CNG engine… Most parts might be able to be cross referenced but that’s about it. ---
**Author:** ![jimmyfloyd](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jimmyfloyd/32/3077_2.png) [@jimmyfloyd](https://forums.speedlife.net/u/jimmyfloyd)\ **Post date:** [February 25, 2016, 6:45am UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/15 "2016-02-25T06:45:04Z")
> [@Spam16v](#): > > In-fucking-possible to get parts for that stationary CNG engine… Most parts might be able to be cross referenced but that’s about it. Hard, but not impossible. It’s essentially 2 GMC 305 Big Block V6 motors put together. Most parts from the V6 fit this ---
**Author:** ![LUC1F3R](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/luc1f3r/32/7299_2.png) [@LUC1F3R](https://forums.speedlife.net/u/LUC1F3R)\ **Post date:** [February 25, 2016, 8:37am UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/16 "2016-02-25T08:37:31Z")
> [@jimmyfloyd](#): > > Hard, but not impossible. It’s essentially 2 GMC 305 Big Block V6 motors put together. Most parts from the V6 fit this I thought that thing was a cob job until I googled it…still fugly IMO. ---
**Author:** ![steve2k1116](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/steve2k1116/32/5230_2.png) [@steve2k1116](https://forums.speedlife.net/u/steve2k1116)\ **Post date:** [March 2, 2016, 3:19pm UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/17 "2016-03-02T15:19:33Z")
Bummp. Tons of offers and trades etc. looking for something reasonable! ---
**Author:** ![steve2k1116](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/steve2k1116/32/5230_2.png) [@steve2k1116](https://forums.speedlife.net/u/steve2k1116)\ **Post date:** [March 15, 2016, 12:47pm UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/18 "2016-03-15T12:47:30Z")
Bummmmp ---
**Author:** ![boosteds13sleeper](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boosteds13sleeper/32/5912_2.png) [@boosteds13sleeper](https://forums.speedlife.net/u/boosteds13sleeper)\ **Post date:** [March 15, 2016, 4:26pm UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/19 "2016-03-15T16:26:22Z")
God i love your father haha. Disappointed hes selling this but whats next should be fantastic. ---
**Author:** ![steve2k1116](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/steve2k1116/32/5230_2.png) [@steve2k1116](https://forums.speedlife.net/u/steve2k1116)\ **Post date:** [March 20, 2016, 5:16pm UTC](https://forums.speedlife.net/t/1927-ford-ratrod/273644/20 "2016-03-20T17:16:36Z")
> [@boosteds13sleeper](#): > > God i love your father haha. Disappointed hes selling this but whats next should be fantastic. Haha thanks buddy. Bummp this up. Still for sale. Best offer takes it. Need it gone [Next page](https://forums.speedlife.net/t/1927-ford-ratrod/273644.md?page=2)