# 1982 Camaro **URL:** \ **Category:** Builds\ **Created:** [February 3, 2007, 2:32am UTC](https://forums.speedlife.net/t/1982-camaro/187809 "2007-02-03T02:32:47Z")\ **Posts on this page:** 2\ **Page:** 3
**Author:** ![Sinner6.0L](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sinner6.0l/32/6016_2.png) [@Sinner6.0L](https://forums.speedlife.net/u/Sinner6.0L)\ **Post date:** [March 15, 2007, 8:09pm UTC](https://forums.speedlife.net/t/1982-camaro/187809/41 "2007-03-15T20:09:23Z")
> [@Another FS thread](https://forums.speedlife.net/t/another-fs-thread/28157/7): > > its alive :mullet: it fired right up no starter fluid or nothing so no i put shit back together some other minor things and then inspection > > who wants to race :burnout: :doh: I’ll run you with my pile! 🙂 ---
**Author:** ![VEE6](https://avatars.discourse-cdn.com/v4/letter/v/6bbea6/32.png) [@VEE6](https://forums.speedlife.net/u/VEE6)\ **Post date:** [March 18, 2007, 11:44pm UTC](https://forums.speedlife.net/t/1982-camaro/187809/42 "2007-03-18T23:44:35Z")
that was short lived i went out to tweak a few things the other day and it wouldnt fire so i started looking around and i did a compression test and cylinder 2 was dead so i put a new head gasket on not to big of a deal but now it wont fire for anything so i checked to see if i had spark and all the plugs fire outside but inside the cylinder plug one doesnt go figure on that (any ideas would be appriciated) so checked to make sure the wire was snug on the distributor cap and thats when i found out the distributor is loose so the car is out of time and im stuck im having major problems getting it to start i get it to turn over and sputter on like one or two cylinders but never all of them i need help im stumped it has new excel wires new cap and rotor and it was running one a broken head gasket and cylinder four flooded so i cant imagine the parts being bad and before someone asks if its getting fuel yes [Previous page](https://forums.speedlife.net/t/1982-camaro/187809.md?page=2)