# 1989 180 shell **URL:** \ **Category:** Classifieds\ **Created:** [August 2, 2006, 11:10pm UTC](https://forums.speedlife.net/t/1989-180-shell/143627 "2006-08-02T23:10:45Z")\ **Posts on this page:** 15\ **Page:** 1
**Author:** ![blue\_monkey\_man](https://avatars.discourse-cdn.com/v4/letter/b/c5a1d2/32.png) [@blue\_monkey\_man](https://forums.speedlife.net/u/blue_monkey_man)\ **Post date:** [August 2, 2006, 11:10pm UTC](https://forums.speedlife.net/t/1989-180-shell/143627/1 "2006-08-02T23:10:45Z")
Since I bought the car at the start of the week I took the sr out for my car and am now selling the shell. There were many posts about this car and after closely looking at it I’m not sure what to believe. I’ll try to be as honest and clear about it if anyone can add HONEST history to the car go ahead. The other threads are [http://www.n-e-c-c.com/forum/viewtopic.php?t=6630](http://www.n-e-c-c.com/forum/viewtopic.php?t=6630) [http://www.n-e-c-c.com/forum/viewtopic.php?t=5756&highlight=](http://www.n-e-c-c.com/forum/viewtopic.php?t=5756&highlight=) As for what i’ve seen on the car i’ll relist things as I THINK they are. Exterior The body of the car is in rough shape. there are many scratches, swirls and color differences in the paint. The front fenders are in the worst shape, with both being rusted and repainted, they need to be gone. I had fenders for this car that would be the same color but sold them, and beleive the guy i sold them to is now trying to get rid of them. They are in very good shape and would be awsome for this car. I fixed the front bumper sagging issue and now it looks pretty good. the car was hit or hit something…? on the passenger (remember its RHD) rear quater. its pushed in but not scraped. side skirts would cover this no prob. the back bumper has some spider cracks only in the paint from backing into stuff or getting hit. It has no rust on it exxcept fo the fenders which is very good. the body does need some work but if you wanted to get it pained with a kit it would have to be done anyways. Frame The underbody and frame is VERY clean! it looks like it was undercoated fairly recently. there are a couple dents on the frame rails from jacks, but thats it, no rust ANYWHERE! I dont know why they said a wheel fell off on this car and it slid, I couldnt see any traces of it, but maybe the parts were replaced. Engine bay good shape once again, ready for an sr to be dropped back in! no rust suspension The suspension apperently was a big issue, but i dont beleive so. The struts and springs in the front and back do need to be replaced, but i will give the ones off my 240 tthat had passed inspection a month before i took it off the road. the ball joints seemed to be a bit dry, but same condition mine were in when I passed. the tie rod ends do need replacing and the can be found for under 80 at canadian tire. You will definitly need new tires in all four corners as these ones are bald! Interior The interior is in near mint shape. the front and rear seats dont have any stains, rips or tears anywhere on them. the carpet does have a couple small tears under the floor mats but is still a good color all the way through.the dash is good except for right above the steering wheel there is a crack. The steering wheel and knob are pretty sweet, along with the ebrake button that wil hold the release down for drifting. I hope that everything, ask if there are any questions, if you need to reach me quickest way is to call 9154806, names dave. also if you wanted stuff done to it such as the body work done or an sr put in and want me to do it, we could work out a deal as well. **Asking price is 1800 for a good shape RHD 180!** ---
**Author:** ![mini\_me1209](https://avatars.discourse-cdn.com/v4/letter/m/7bcc69/32.png) [@mini\_me1209](https://forums.speedlife.net/u/mini_me1209)\ **Post date:** [August 2, 2006, 11:55pm UTC](https://forums.speedlife.net/t/1989-180-shell/143627/2 "2006-08-02T23:55:59Z")
i know sum1 in Lethbridge that would be interested!!! he can be contacted at [jegger69@hotmail.com](mailto:jegger69@hotmail.com) ---
**Author:** ![jdms13rhd](https://avatars.discourse-cdn.com/v4/letter/j/f05b48/32.png) [@jdms13rhd](https://forums.speedlife.net/u/jdms13rhd)\ **Post date:** [August 3, 2006, 12:51am UTC](https://forums.speedlife.net/t/1989-180-shell/143627/3 "2006-08-03T00:51:54Z")
I jusr skimmed through this and didnt see a price. Maby I am blind or too lazy to click on the links. Anywho Im interested. Call me on my cell some time please. ---
**Author:** ![Citystars](https://avatars.discourse-cdn.com/v4/letter/c/97f17d/32.png) [@Citystars](https://forums.speedlife.net/u/Citystars)\ **Post date:** [August 3, 2006, 1:06am UTC](https://forums.speedlife.net/t/1989-180-shell/143627/4 "2006-08-03T01:06:01Z")
yoo! did u take out all the parts? i would be interested in some of the shit. U should take off all the performance stuff and then sell the shell. I hope u took that nismo clutch ---
**Author:** ![Hot\_Wheelz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hot_wheelz/32/5809_2.png) [@Hot\_Wheelz](https://forums.speedlife.net/u/Hot_Wheelz)\ **Post date:** [August 3, 2006, 4:39am UTC](https://forums.speedlife.net/t/1989-180-shell/143627/5 "2006-08-03T04:39:37Z")
☹ if only it was like 1200 less than what your asking ☹ i could have a great time with a project car like that!!! \>.\< ---
**Author:** ![240DRIFTz](https://avatars.discourse-cdn.com/v4/letter/2/bbe5ce/32.png) [@240DRIFTz](https://forums.speedlife.net/u/240DRIFTz)\ **Post date:** [August 3, 2006, 10:52am UTC](https://forums.speedlife.net/t/1989-180-shell/143627/6 "2006-08-03T10:52:46Z")
> for a good shape RHD 180! ahahha i read a thread on this car…and i tihnk its far from being in good shape with al thats happend to it…i herd it had like what 4 acidents? lollll yea if it was 1,200 less then what your asking id grab it too ---
**Author:** ![Fergy](https://avatars.discourse-cdn.com/v4/letter/f/a4c791/32.png) [@Fergy](https://forums.speedlife.net/u/Fergy)\ **Post date:** [August 3, 2006, 4:39pm UTC](https://forums.speedlife.net/t/1989-180-shell/143627/7 "2006-08-03T16:39:38Z")
Good luck with the sale. 😃 ---
**Author:** ![baker\_jeff](https://avatars.discourse-cdn.com/v4/letter/b/0ea827/32.png) [@baker\_jeff](https://forums.speedlife.net/u/baker_jeff)\ **Post date:** [August 3, 2006, 4:43pm UTC](https://forums.speedlife.net/t/1989-180-shell/143627/8 "2006-08-03T16:43:32Z")
Thats a damn good deal even considering the history of this car. ---
**Author:** ![Hot\_Wheelz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hot_wheelz/32/5809_2.png) [@Hot\_Wheelz](https://forums.speedlife.net/u/Hot_Wheelz)\ **Post date:** [August 3, 2006, 9:49pm UTC](https://forums.speedlife.net/t/1989-180-shell/143627/9 "2006-08-03T21:49:06Z")
im bidding on it … hopefully we can come to an agreement… id love to build it up over the winter! ---
**Author:** ![CA18DET-180SX](https://avatars.discourse-cdn.com/v4/letter/c/e0b2c6/32.png) [@CA18DET-180SX](https://forums.speedlife.net/u/CA18DET-180SX)\ **Post date:** [August 4, 2006, 10:44pm UTC](https://forums.speedlife.net/t/1989-180-shell/143627/10 "2006-08-04T22:44:32Z")
Any chance of parting some small things? Like maybe the high beam switch underneath the rear defrost? ---
**Author:** ![Hot\_Wheelz](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/hot_wheelz/32/5809_2.png) [@Hot\_Wheelz](https://forums.speedlife.net/u/Hot_Wheelz)\ **Post date:** [August 5, 2006, 2:26pm UTC](https://forums.speedlife.net/t/1989-180-shell/143627/11 "2006-08-05T14:26:05Z")
i doubt it… if anyones bidding on it they’re probably bidding on the entire car… like i am ---
**Author:** ![Fergy](https://avatars.discourse-cdn.com/v4/letter/f/a4c791/32.png) [@Fergy](https://forums.speedlife.net/u/Fergy)\ **Post date:** [August 5, 2006, 6:23pm UTC](https://forums.speedlife.net/t/1989-180-shell/143627/12 "2006-08-05T18:23:31Z")
How are the brakes? I don’t mean to be negative or anything but you said some of the stuff would’ve passed inspection in comparison with your 240, so what about to front brakes? I’m just curious, maybe mechanics here are a little more strict than edmonton. :? ---
**Author:** ![blue\_monkey\_man](https://avatars.discourse-cdn.com/v4/letter/b/c5a1d2/32.png) [@blue\_monkey\_man](https://forums.speedlife.net/u/blue_monkey_man)\ **Post date:** [August 5, 2006, 7:35pm UTC](https://forums.speedlife.net/t/1989-180-shell/143627/13 "2006-08-05T19:35:31Z")
first i wont part anything from the car, and the brakes seemed okay but certainly wernt brand new. ---
**Author:** ![240DRIFTz](https://avatars.discourse-cdn.com/v4/letter/2/bbe5ce/32.png) [@240DRIFTz](https://forums.speedlife.net/u/240DRIFTz)\ **Post date:** [August 12, 2006, 11:28am UTC](https://forums.speedlife.net/t/1989-180-shell/143627/14 "2006-08-12T11:28:06Z")
whats the lowest you plan on going for the car? ---
**Author:** ![blue\_monkey\_man](https://avatars.discourse-cdn.com/v4/letter/b/c5a1d2/32.png) [@blue\_monkey\_man](https://forums.speedlife.net/u/blue_monkey_man)\ **Post date:** [August 13, 2006, 10:48am UTC](https://forums.speedlife.net/t/1989-180-shell/143627/15 "2006-08-13T10:48:45Z")
Car is SOLD