# 1989 240 Hatch Part out / Brand New PBM Coilovers **URL:** \ **Category:** Classifieds\ **Created:** [February 27, 2011, 8:09am UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567 "2011-02-27T08:09:46Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Datenshi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/datenshi/32/5899_2.png) [@Datenshi](https://forums.speedlife.net/u/Datenshi)\ **Post date:** [February 27, 2011, 8:09am UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/1 "2011-02-27T08:09:46Z")
**Location:** Toronto (DVP and Eglinton) **Delivery:** Not available, pick up only. **Contact:** PM or [Datenshi@KaosTheory.net](mailto:Datenshi@KaosTheory.net) Hey, I’ve got quite a bit of stuff for sale. I’m stripping down my 240sx and thinking about starting fresh with something. Parts listed with a price are negotiable but pretty firm. The car it’s self will mostly be obo, just send me an offer and we’ll negotiate a price. I’ll probably be pretty flexiable depending on some of the offers. This will be going on until the end of April, when I will be moving and the car will be sent to the junkyard for scrap. So get what you need, while you can. Pictures will be up soon of all the parts I’m specifically selling, if there is something from the car you would like pictures of, let me know and I will take them for you. SOLD - Powered by Max Coil-overs Brand new, never been used. $10 - Powered by Max Magnetic Oil Drain Plug, used for less than one oil change. $220 - Tien Inner and Outer Tie Rods, Used for less than 2500km, paid 260$ $150 - 180sx Driver Seat (USDM Passenger) ![http://www.son240sx.org/attachment.php?attachmentid=17296&d=1298823303](http://www.son240sx.org/attachment.php?attachmentid=17296&d=1298823303) 40$ - Kenwood Amp 150$ Black 240sx Coupe interior pieces, have most… missing a couple plastic pieces. Driver side seat is torn on the bolster. 150$ Complete Blue 240sx Hatch interior, seats, dash, door panels,etc. there should be everything. Excellent condition. 75$ - Black HUD Dash, excellent condition… have everything for it and all plastic vent pieces. 75$ - Digital Cluster and HUD with harness 50$ - Hatch rear tail lights with center piece OK! And as for the hatchback that I am parting out as well, everything below will be OBO. As thing’s sell, I’ll list what I **_DON’T_** have so you don’t all ask for things that aren’t available. Unless it’s here in this list below I have it. Anything you need for parts you can let me know. Offer me a price and we’ll work something out. Also, the car was pretty much completely rust-less, so if someone wants the frame rails… I’m not sure if they can be salvaged for another car… but if they can and you can cut them off… I’ll let them go to a good home for the right price. Subframe is rust-less, rear quarter panels, hatch, etc. So if you can cut and weld, maybe we can work something out otherwise anything that can’t be unbolted will be sent to the junk yard. **Specs:** 1989 Nissan 240sx Hatchback with original KA24E. 251000 KM’s, ran very well. Manual, stock tranny ran perfect, no grinds and shifted smooth. 4 Bolt hubs, OEM Teardrop Wheels in decent condition… not painted with center caps, and it’s Platinum blue in color. Open Diff, ABS Model, has sunroof. _ **THINGS I DON’T HAVE OR ALREADY TAKEN:** _ -Hood -Front Pop-up Headlights -Front Bumper or Lip -Battery -Front left and right fenders -Clutch Fan and shroud -Passenger Side Inner and Outer Tie Rod -Intake piping -Hatch (Third Brake Light and Rear Window Wiper went with it) -(2) Front Speakers -Windshield [ATTACH=CONFIG]17295[/ATTACH] [ATTACH=CONFIG]17297[/ATTACH] [ATTACH=CONFIG]17296[/ATTACH] ---
**Author:** ![Stiky](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/stiky/32/5692_2.png) [@Stiky](https://forums.speedlife.net/u/Stiky)\ **Post date:** [February 27, 2011, 8:31am UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/2 "2011-02-27T08:31:38Z")
How much for the car in driveable shape as it stands right now? ---
**Author:** ![Datenshi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/datenshi/32/5899_2.png) [@Datenshi](https://forums.speedlife.net/u/Datenshi)\ **Post date:** [February 27, 2011, 8:47am UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/3 "2011-02-27T08:47:33Z")
I may be selling the shell completely stripped to a buddy of mine. He’s offered 500$ not rolling, completely stripped. ---
**Author:** ![timmy\_sivad](https://avatars.discourse-cdn.com/v4/letter/t/f08c70/32.png) [@timmy\_sivad](https://forums.speedlife.net/u/timmy_sivad)\ **Post date:** [February 27, 2011, 1:46pm UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/4 "2011-02-27T13:46:03Z")
ill take the hatch if its rustless… pmd ---
**Author:** ![Datenshi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/datenshi/32/5899_2.png) [@Datenshi](https://forums.speedlife.net/u/Datenshi)\ **Post date:** [February 27, 2011, 2:41pm UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/5 "2011-02-27T14:41:18Z")
PM’s responded to. ---
**Author:** ![Datenshi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/datenshi/32/5899_2.png) [@Datenshi](https://forums.speedlife.net/u/Datenshi)\ **Post date:** [March 1, 2011, 4:20pm UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/6 "2011-03-01T16:20:03Z")
Starting to remove parts today, things I still have are: Complete 5 Speed swap, KA24E with 250k for sale, KA24E tranny, side mirrors, power doors, sunroof glass with good plastic lining, all four brakes, all suspension oem suspension arms and struts and springs, decent brake rotors, master cylinder, etc It’s all gotta go guys. ---
**Author:** ![nickpavlyukh](https://avatars.discourse-cdn.com/v4/letter/n/ce73a5/32.png) [@nickpavlyukh](https://forums.speedlife.net/u/nickpavlyukh)\ **Post date:** [March 1, 2011, 4:56pm UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/7 "2011-03-01T16:56:27Z")
on the 180sx seat is that a rip in the upper bolster? im guessing it wouldnt bolt in on the driverside usdm 240 ---
**Author:** ![SaNTi](https://avatars.discourse-cdn.com/v4/letter/s/439d5e/32.png) [@SaNTi](https://forums.speedlife.net/u/SaNTi)\ **Post date:** [March 1, 2011, 5:19pm UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/8 "2011-03-01T17:19:46Z")
> [@nickpavlyukh](#): > > on the 180sx seat is that a rip in the upper bolster? im guessing it wouldnt bolt in on the driverside usdm 240 Nah, I’m pretty sure that’s a little rubber thing that says “180sx” ---
**Author:** ![Martino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/martino/32/5674_2.png) [@Martino](https://forums.speedlife.net/u/Martino)\ **Post date:** [March 1, 2011, 6:30pm UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/9 "2011-03-01T18:30:12Z")
> [@SaNTi](#): > > Nah, I’m pretty sure that’s a little rubber thing that says “180sx” Negative. ---
**Author:** ![Datenshi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/datenshi/32/5899_2.png) [@Datenshi](https://forums.speedlife.net/u/Datenshi)\ **Post date:** [March 1, 2011, 9:43pm UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/10 "2011-03-01T21:43:04Z")
It’s not a tear, it’s a button/pin sort of thing that comes on it… I think it says Nissan. Can’t remember off the top of my head and no it won’t directly bolt into a driver side usdm side… your adjustments for the recliner would be up against the center console and seat belt on the other side… As for the seats condition… I’d rate it a 9/10, there is a mark on the front of the seat as you can sort of see in the picture, its not really so bad to be honest and the seat has VERY minimal wear. It’s VERY NAICE. Edit: Checked today, the button does say Nissan on it. ---
**Author:** ![nickpavlyukh](https://avatars.discourse-cdn.com/v4/letter/n/ce73a5/32.png) [@nickpavlyukh](https://forums.speedlife.net/u/nickpavlyukh)\ **Post date:** [March 1, 2011, 10:06pm UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/11 "2011-03-01T22:06:49Z")
yea true say, fuck lol. id buy that seat off you if i could actually sit in it… ---
**Author:** ![Datenshi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/datenshi/32/5899_2.png) [@Datenshi](https://forums.speedlife.net/u/Datenshi)\ **Post date:** [March 3, 2011, 8:08am UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/12 "2011-03-03T08:08:28Z")
I’ve come up with a list of things off the top of my head that I still have. Starting next week on Monday I will be ripping into the entire car and stripping it… pictures of everything will be up as stuff comes off. For now I will be taking offers on all of it, once I start removing it from the car and getting pictures I will set a price. If you ask for something specific in PM or email, I will try my best to get pictures of it for you if its before Monday next week. Everything is in awesome condition, minty, still working and needs to go! -KA24E -KA24E Tranny -Alternator -Clutch Pedal -Gas and Brake Pedals -Spark Plugs -Brake Master Cylinder -Clutch Cylinder -ABS System -Injectors -Intake Manifold -Throttle Body -(2) Front Calipers /w ABS -(2) Rear Calipers /w ABS -Open Diff -ALL OEM Suspension Arms, front and rear. -Driver Side Tie Rod and End -Driveshaft -Axles -Driver Side Door /w Power options -Passenger Side Door /w Power options -Sunroof Glass with good lining -(4) OEM Teardrop Wheels, good condition… not painted. Comes with center caps. -(2) Rear Speakers -OEM Shift Knob -(2) Front Windshield Wipers -Windshield Wiper System, amp and motor and jug. -All Switches (Signal, Windshield Wipers, Cruise Control, etc…) -Hatchback Taillights with 240sx center garnish -Rear Subframe (No rust, non-hicas) -(2) Front Knuckles -Distributor, Cap and Rotor with Wires -KA24E ECU -Power Side Mirrors ( Driver and Passenger Side, both work) -OEM Steering Wheel with working functions and horn. -Fuse Boxes with all fuses. -(2) Front Rotors -(2) Rear Rotors -(2) OEM Front Struts and Springs -(2) OEM Rear Struts and Springs -(2) OEM Side Skirts -Transmission Crossmember -Rearview Mirror -Rear Bumper with OEM Valences -E-Brake Cables and Handle -Analog KA24E Cluster -Hatch and Gas Tank Release /w Cables -HVAC Control Unit (Temperature Controls) -Signal Lights for Pignose front bumper -Full Cat-back OEM Exhaust (Cat passed e-test with FLYING colors in August) -4 Lug Hubs (2 Front, 2 Rear) ---
**Author:** ![braden](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/braden/32/5757_2.png) [@braden](https://forums.speedlife.net/u/braden)\ **Post date:** [March 3, 2011, 5:27pm UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/13 "2011-03-03T17:27:48Z")
how much are you looking for the motor/ trans ?someone buy the PBM coils they are so nice! i want a set so bad but have to much debts to get another set atm ☹ ---
**Author:** ![SaNTi](https://avatars.discourse-cdn.com/v4/letter/s/439d5e/32.png) [@SaNTi](https://forums.speedlife.net/u/SaNTi)\ **Post date:** [March 3, 2011, 5:39pm UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/14 "2011-03-03T17:39:18Z")
> [@braden](#): > > how much are you looking for the motor/ trans ?someone buy the PBM coils they are so nice! i want a set so bad but have to much debts to get another set atm ☹ They’re mine! mwahahahaa ---
**Author:** ![Datenshi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/datenshi/32/5899_2.png) [@Datenshi](https://forums.speedlife.net/u/Datenshi)\ **Post date:** [March 3, 2011, 7:36pm UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/15 "2011-03-03T19:36:41Z")
To be honest, I’m not really ready to pull the motor or tranny probably until atleast Monday. Have to get a few things before that job can be done lol. It’s also why a lot of stuff doesn’t have a price yet… if people give me a decent offer on what they think is acceptable I’ll take it out as quick as possible for you to buy. Otherwise once most stuff is out I will set prices and thats what it’ll be… And yes, SaNTi is taking the coils this weekend according to the plan. 😛 ---
**Author:** ![braden](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/braden/32/5757_2.png) [@braden](https://forums.speedlife.net/u/braden)\ **Post date:** [March 4, 2011, 7:51am UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/16 "2011-03-04T07:51:08Z")
congrats santi and no hurry just looking for a motor for my missile ---
**Author:** ![Datenshi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/datenshi/32/5899_2.png) [@Datenshi](https://forums.speedlife.net/u/Datenshi)\ **Post date:** [March 4, 2011, 8:24am UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/17 "2011-03-04T08:24:26Z")
No worries ill keep you posted when I start pulling it. I’ll get you pics before I start and after and let you know a price. Probabbly around 100, depends what you want included ---
**Author:** ![Daninhosx](https://avatars.discourse-cdn.com/v4/letter/d/b5ac83/32.png) [@Daninhosx](https://forums.speedlife.net/u/Daninhosx)\ **Post date:** [March 4, 2011, 7:14pm UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/18 "2011-03-04T19:14:32Z")
what happen to the passenger seat? ---
**Author:** ![Datenshi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/datenshi/32/5899_2.png) [@Datenshi](https://forums.speedlife.net/u/Datenshi)\ **Post date:** [March 4, 2011, 7:32pm UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/19 "2011-03-04T19:32:16Z")
180sx seat is still for sale. ---
**Author:** ![sbz](https://avatars.discourse-cdn.com/v4/letter/s/13edae/32.png) [@sbz](https://forums.speedlife.net/u/sbz)\ **Post date:** [March 4, 2011, 8:11pm UTC](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567/20 "2011-03-04T20:11:25Z")
how much for rear subframe and diff? [Next page](https://forums.speedlife.net/t/1989-240-hatch-part-out-brand-new-pbm-coilovers/209567.md?page=2)