# 1991 Fastback Half Built Project

**URL:** <https://forums.speedlife.net/t/1991-fastback-half-built-project/226515>\
**Category:** Classifieds\
**Created:** [October 11, 2012, 9:23pm UTC](https://forums.speedlife.net/t/1991-fastback-half-built-project/226515 "2012-10-11T21:23:57Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![Becharco](https://avatars.discourse-cdn.com/v4/letter/b/ad7895/32.png) [@Becharco](https://forums.speedlife.net/u/Becharco)\
**Post date:** [October 11, 2012, 9:23pm UTC](https://forums.speedlife.net/t/1991-fastback-half-built-project/226515/1 "2012-10-11T21:23:57Z")

</div>

Selling my project, moving and need the space and money.  
it is AUTO  
233000 on the body

Im not parting anything, buy it all or kindly buy nothing.  
Frames been patched by a licensed welder, and got the OK from my mechanic. floors have been patched using body steel, a ton of screws and silicone then painted with rubberized undercoating, i fixed the hatch and put a new rad support in it… minimal body work remaining. This car has been driven for approximately a month over the past year and a half, ive been putting money into it since then. All new stuff is totally stock. All premium parts.

New:  
Fuel pump  
Tank straps  
Calipers  
Slotted rotors  
Premium pads  
Ball joints  
Lower A arms  
Tierod ends  
Brake lines  
Fuel lines  
Master cylender  
Sway bar links  
Pioneer stereo  
Speakers in the rear  
Fancy hidden antenna  
Probably some other stuff that im not remembering

Theres a spot in the back of the car that needs attention, where the last exhaust hangar is (was)… the point is, theres not much frame there anymore. other then that, Its ready for the road, or drift track… uhh needs a passenger seat (long story)

Comes with a set of 17" Enkei rims and stock rims with new tires. (and a set of black tuner lugs) The engine has 0 KM This motor was completely unhurt when i pulled it, it was leaking oil, and the oil rings were no good, the block has been hot tanked, honed, painted. Has new rings, new gaskets, ALL new bearings, frost plugs… now, the motor is still somewhat broken down, but the hard work is done, its ready to be put back together. I was building it for 300hp on boost. I haven’t skimped on this build and everything was done to the best it could be done. I can put some pictures up at request. Honestly, I hate to sell it. Im not going to hide anything so buy with confidence. Ive also got an engine stand and a lift (bought them brand new for this build) if you want them its $300 for the pair. The motor now has cams and timing installed.

 ![http://i1113.photobucket.com/albums/k506/Becarco/DSCF2297.jpg](http://i1113.photobucket.com/albums/k506/Becarco/DSCF2297.jpg)  
 ![http://i1113.photobucket.com/albums/k506/Becarco/292462_10150754245645599_605140598_20415807_6939634_n1.jpg](http://i1113.photobucket.com/albums/k506/Becarco/292462_10150754245645599_605140598_20415807_6939634_n1.jpg)  
^^Before i fixed the hatch^^  
After  
 ![http://i1113.photobucket.com/albums/k506/Becarco/Facebook/Mobile%20Uploads/335110_10150856223890599_1170335746_o.jpg](http://i1113.photobucket.com/albums/k506/Becarco/Facebook/Mobile%20Uploads/335110_10150856223890599_1170335746_o.jpg)  
 ![http://i1113.photobucket.com/albums/k506/Becarco/334680_10150766584285599_605140598_20574676_3616032_o.jpg](http://i1113.photobucket.com/albums/k506/Becarco/334680_10150766584285599_605140598_20574676_3616032_o.jpg)  
 ![http://i1113.photobucket.com/albums/k506/Becarco/IMG111.jpg](http://i1113.photobucket.com/albums/k506/Becarco/IMG111.jpg)  
 ![http://i1113.photobucket.com/albums/k506/Becarco/IMG116.jpg](http://i1113.photobucket.com/albums/k506/Becarco/IMG116.jpg)

While i was breaking it down

 ![http://i1113.photobucket.com/albums/k506/Becarco/IMG254.jpg](http://i1113.photobucket.com/albums/k506/Becarco/IMG254.jpg)  
 ![http://i1113.photobucket.com/albums/k506/Becarco/IMG256.jpg](http://i1113.photobucket.com/albums/k506/Becarco/IMG256.jpg)

 ![http://i1113.photobucket.com/albums/k506/Becarco/IMG258.jpg](http://i1113.photobucket.com/albums/k506/Becarco/IMG258.jpg)  
 ![http://i1113.photobucket.com/albums/k506/Becarco/IMG022-1.jpg](http://i1113.photobucket.com/albums/k506/Becarco/IMG022-1.jpg)  
 ![http://i1113.photobucket.com/albums/k506/Becarco/IMG001.jpg](http://i1113.photobucket.com/albums/k506/Becarco/IMG001.jpg)  
 ![http://i1113.photobucket.com/albums/k506/Becarco/IMG024.jpg](http://i1113.photobucket.com/albums/k506/Becarco/IMG024.jpg)  
 ![http://i1113.photobucket.com/albums/k506/Becarco/IMG020-1.jpg](http://i1113.photobucket.com/albums/k506/Becarco/IMG020-1.jpg)  
 ![http://i1113.photobucket.com/albums/k506/Becarco/IMG032.jpg](http://i1113.photobucket.com/albums/k506/Becarco/IMG032.jpg)  
 ![http://i1113.photobucket.com/albums/k506/Becarco/IMG046.jpg](http://i1113.photobucket.com/albums/k506/Becarco/IMG046.jpg)

$3500 OBO  
Located in Tilbury, Ontario  
If you have any questions feel free to PM me.

---

<div class="post-metadata">

**Author:** ![s14rb25](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s14rb25/32/5763_2.png) [@s14rb25](https://forums.speedlife.net/u/s14rb25)\
**Post date:** [October 11, 2012, 11:11pm UTC](https://forums.speedlife.net/t/1991-fastback-half-built-project/226515/2 "2012-10-11T23:11:27Z")

</div>

Good thing you used a tonne of screws and silicone in your floor!  
Now did you use play-doh or silly putty to fix the hatch?

Whose the mechanic that “ok’d” this?

---

<div class="post-metadata">

**Author:** ![Becharco](https://avatars.discourse-cdn.com/v4/letter/b/ad7895/32.png) [@Becharco](https://forums.speedlife.net/u/Becharco)\
**Post date:** [October 11, 2012, 11:20pm UTC](https://forums.speedlife.net/t/1991-fastback-half-built-project/226515/3 "2012-10-11T23:20:30Z")

</div>

I fiber glassed the hatch, You want his Home address or his Certificate number? how about his phone number?  
And your bad attitude isn’t needed here, kindly move along. Im being honest, the least you can to is not be rude in my thread.

---

<div class="post-metadata">

**Author:** ![I\_3-SR20DET](https://avatars.discourse-cdn.com/v4/letter/i/f0a364/32.png) [@I\_3-SR20DET](https://forums.speedlife.net/u/I_3-SR20DET)\
**Post date:** [October 12, 2012, 9:21pm UTC](https://forums.speedlife.net/t/1991-fastback-half-built-project/226515/4 "2012-10-12T21:21:23Z")

</div>

a ton of screws though…

---

<div class="post-metadata">

**Author:** ![Becharco](https://avatars.discourse-cdn.com/v4/letter/b/ad7895/32.png) [@Becharco](https://forums.speedlife.net/u/Becharco)\
**Post date:** [October 12, 2012, 11:57pm UTC](https://forums.speedlife.net/t/1991-fastback-half-built-project/226515/5 "2012-10-12T23:57:47Z")

</div>

Well now i know why nobody is honest in the for sale section. The silicone i used is called “Silaprene” this is the stuff thats holding semi trailers together, it holds body panels on newer cars. Can i get some members in here that are respectful? Dont tell me your first car was put together flawlessly, I was 17 when i bought this car, and ive worked my ass off to get this car on the road, did you two not read the sticky that says “NOTICE: Replying to FS Threads” go and read it.

“Do not reply to For Sale threads UNLESS you are directly interested in the product.  
Posts such as ‘sick car’ or ‘looks clean’ or ‘wicked deal’ or ‘id buy it if i had the money’ will result in suspension.  
Posts that are off topic will result in suspension.  
Posts that are intended to start shit will result in a ban.”

A little further in:  
“If you aren’t interested in the item, DO NOT POST. Simple enough?”

Are any of you two clowns interested in my car?  
Typical GTA guys, No respect

---

<div class="post-metadata">

**Author:** ![trillex905](https://avatars.discourse-cdn.com/v4/letter/t/3da27b/32.png) [@trillex905](https://forums.speedlife.net/u/trillex905)\
**Post date:** [October 13, 2012, 4:48am UTC](https://forums.speedlife.net/t/1991-fastback-half-built-project/226515/6 "2012-10-13T04:48:13Z")

</div>

sick car, looks clean, wicked deal, id buy it if i had the money, glws

![http://i1254.photobucket.com/albums/hh602/cretondude/Gifs%20memes/0382_s7tr.gif](http://i1254.photobucket.com/albums/hh602/cretondude/Gifs%20memes/0382_s7tr.gif)

---

<div class="post-metadata">

**Author:** ![Becharco](https://avatars.discourse-cdn.com/v4/letter/b/ad7895/32.png) [@Becharco](https://forums.speedlife.net/u/Becharco)\
**Post date:** [October 14, 2012, 8:16pm UTC](https://forums.speedlife.net/t/1991-fastback-half-built-project/226515/7 "2012-10-14T20:16:55Z")

</div>

Looks like I’m not the only one with too much time on my hands

---

<div class="post-metadata">

**Author:** ![Becharco](https://avatars.discourse-cdn.com/v4/letter/b/ad7895/32.png) [@Becharco](https://forums.speedlife.net/u/Becharco)\
**Post date:** [October 24, 2012, 10:34pm UTC](https://forums.speedlife.net/t/1991-fastback-half-built-project/226515/8 "2012-10-24T22:34:04Z")

</div>

Bump

---

<div class="post-metadata">

**Author:** ![s14rb25](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s14rb25/32/5763_2.png) [@s14rb25](https://forums.speedlife.net/u/s14rb25)\
**Post date:** [October 25, 2012, 3:28am UTC](https://forums.speedlife.net/t/1991-fastback-half-built-project/226515/9 "2012-10-25T03:28:25Z")

</div>

what happened to the passenger seat?  
did it fall through your floor?

---

<div class="post-metadata">

**Author:** ![JonathanPrem](https://avatars.discourse-cdn.com/v4/letter/j/6f9a4e/32.png) [@JonathanPrem](https://forums.speedlife.net/u/JonathanPrem)\
**Post date:** [October 25, 2012, 10:16am UTC](https://forums.speedlife.net/t/1991-fastback-half-built-project/226515/10 "2012-10-25T10:16:28Z")

</div>

^ Dude leave the guy alone. If your interested pm him. We see ads like this on the regular here No point in bashing him. Glws

---

<div class="post-metadata">

**Author:** ![Becharco](https://avatars.discourse-cdn.com/v4/letter/b/ad7895/32.png) [@Becharco](https://forums.speedlife.net/u/Becharco)\
**Post date:** [October 25, 2012, 12:31pm UTC](https://forums.speedlife.net/t/1991-fastback-half-built-project/226515/11 "2012-10-25T12:31:12Z")

</div>

> [@s14rb25](#):
>
> what happened to the passenger seat?  
> did it fall through your floor?

No i tried to get a pair of Prelude seats to fit but it didnt work out

![http://i1113.photobucket.com/albums/k506/Becarco/haters_gonna_hate_eagle.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/e/3/e3cc449a3fdcf62ef40bb5d896678dc44c04f5ea.jpeg)

 ![http://i1113.photobucket.com/albums/k506/Becarco/unsuccessful_troll.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/3/f/3fe3da7296a47e83aaf12be6d80a6d05660ef14d.jpeg)

---

<div class="post-metadata">

**Author:** ![simplemind7](https://avatars.discourse-cdn.com/v4/letter/s/0ea827/32.png) [@simplemind7](https://forums.speedlife.net/u/simplemind7)\
**Post date:** [October 25, 2012, 1:58pm UTC](https://forums.speedlife.net/t/1991-fastback-half-built-project/226515/12 "2012-10-25T13:58:13Z")

</div>

Anyone else on here would say they’re selling a ‘mint’ car.

Good luck with the sale. Kudos for you honesty.

---

<div class="post-metadata">

**Author:** ![Becharco](https://avatars.discourse-cdn.com/v4/letter/b/ad7895/32.png) [@Becharco](https://forums.speedlife.net/u/Becharco)\
**Post date:** [November 4, 2012, 2:14pm UTC](https://forums.speedlife.net/t/1991-fastback-half-built-project/226515/13 "2012-11-04T14:14:04Z")

</div>

Sold
