# 1991 Nissan 240sx hatch roller/shell CLEAN **URL:** \ **Category:** Classifieds\ **Created:** [June 16, 2013, 2:28pm UTC](https://forums.speedlife.net/t/1991-nissan-240sx-hatch-roller-shell-clean/231219 "2013-06-16T14:28:24Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![Viggs](https://avatars.discourse-cdn.com/v4/letter/v/ac91a4/32.png) [@Viggs](https://forums.speedlife.net/u/Viggs)\ **Post date:** [June 16, 2013, 2:28pm UTC](https://forums.speedlife.net/t/1991-nissan-240sx-hatch-roller-shell-clean/231219/1 "2013-06-16T14:28:24Z")
SOLD I’ve had this car for 6 years now and I’ve moved on to a new project. I never did a carfax on it but I bought it on zilvia and had it shipped up from South Carolina. That being sad it is rust free and absolutely clean. Its originally a 5spd with power windows, locks, and mirrors, non-ABS, non-Hicas, push up sunroof. I have gone through this entire car from the ground up with new wheel-bearings and ball joints everywhere and a full Energy suspension bushing kit anywhere a old rubber one used to be including the subframe bushings. The odometer is 220,000 with less than 5,000 of that since I replaced everything that was or could wear out. The car does not have a engine/trans, driveshaft, differential, axles, exhaust or a fuel system. Also the wheels are not included, but available for the right price. I did run the car on e85 so the original gas tank has been replaced with a aluminum 20 gallon fuel cell that has been lined. The filler neck has been replaced with a battery switch behind the fuel door. Here is a list of what the car has: Exterior: J-Blood replica front bumper GP-sports replica rear bumper GP-sports replica side skirts 180sx type-X replica wing Tinted ebay tails 180sx side glass Oem hood with custom venting Battery switch behind fuel door New windshield Circuit sports hood dampeners 350z Daytona Blue paint Brakes: 300zx 30mm aluminum front calipers 300zx front caliper adapters for 350z rotors 350z slotted and xdrilled front rotors 300zx aluminum rear calipers 300zx slotted and xdrilled rear rotors 300zx ebrake conversion with 2+2 cables etc. 300zx master cylinder SPL 300zx caliper conversion lines Suspension: Tien HE coilovers(excellent shape) Energy suspension complete poly bushing set (front lower control arms, front tension rods, rear lower control arms, rear knuckles) SPL v5 tie rod ends 300zx tie rods 300zx steering rack boots New ball joints all around Energy suspension subframe bushings SPL rucas SPL toe rods SPL traction rods SPL eccentric lock out 300zx rear 5 lug hubs with new bearings Ichiba front 5 lug hubs with ARP studs Interior: S14 seats NRG quick release Momo Corse steering wheel Classic cracked dashboard 20 gallon fuel cell under the hatch SOLD SOLD SOLD ---
**Author:** ![2TurboZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/2turboz/32/7577_2.png) [@2TurboZ](https://forums.speedlife.net/u/2TurboZ)\ **Post date:** [June 16, 2013, 2:30pm UTC](https://forums.speedlife.net/t/1991-nissan-240sx-hatch-roller-shell-clean/231219/2 "2013-06-16T14:30:26Z")
What is the size and offset of the wheels/tires? I might be interested ---
**Author:** ![Viggs](https://avatars.discourse-cdn.com/v4/letter/v/ac91a4/32.png) [@Viggs](https://forums.speedlife.net/u/Viggs)\ **Post date:** [June 16, 2013, 2:36pm UTC](https://forums.speedlife.net/t/1991-nissan-240sx-hatch-roller-shell-clean/231219/3 "2013-06-16T14:36:39Z")
Oh I completely forgot to post what they are, Gulf Stich 18x9.5 +17 and 18x10.5 +17. Had them refinished and rechromed two years ago, absolutely no curb rash. 235/40 Nitto nt05s on the front, 275/35 BFG drag radials on the rear. ---
**Author:** ![2TurboZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/2turboz/32/7577_2.png) [@2TurboZ](https://forums.speedlife.net/u/2TurboZ)\ **Post date:** [June 16, 2013, 2:50pm UTC](https://forums.speedlife.net/t/1991-nissan-240sx-hatch-roller-shell-clean/231219/4 "2013-06-16T14:50:21Z")
Price? ---
**Author:** ![Viggs](https://avatars.discourse-cdn.com/v4/letter/v/ac91a4/32.png) [@Viggs](https://forums.speedlife.net/u/Viggs)\ **Post date:** [June 16, 2013, 2:57pm UTC](https://forums.speedlife.net/t/1991-nissan-240sx-hatch-roller-shell-clean/231219/5 "2013-06-16T14:57:42Z")
$2500 ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [June 16, 2013, 3:07pm UTC](https://forums.speedlife.net/t/1991-nissan-240sx-hatch-roller-shell-clean/231219/6 "2013-06-16T15:07:16Z")
that is a wicked shell… i’m moving this to network section… some good choice and looks like good execution too. that hood is awesome. ---
**Author:** ![slowrado](https://avatars.discourse-cdn.com/v4/letter/s/4da419/32.png) [@slowrado](https://forums.speedlife.net/u/slowrado)\ **Post date:** [June 16, 2013, 5:19pm UTC](https://forums.speedlife.net/t/1991-nissan-240sx-hatch-roller-shell-clean/231219/7 "2013-06-16T17:19:04Z")
Gaaah, so much want. I read the list of things done before looking at the pics. I was not expecting that. :thumbup: Glws ---
**Author:** ![Adam\_s13](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@Adam\_s13](https://forums.speedlife.net/u/Adam_s13)\ **Post date:** [June 16, 2013, 6:03pm UTC](https://forums.speedlife.net/t/1991-nissan-240sx-hatch-roller-shell-clean/231219/8 "2013-06-16T18:03:16Z")
You will probably sell it already if this aero was not molded in. GLWS ---
**Author:** ![Viggs](https://avatars.discourse-cdn.com/v4/letter/v/ac91a4/32.png) [@Viggs](https://forums.speedlife.net/u/Viggs)\ **Post date:** [June 16, 2013, 9:11pm UTC](https://forums.speedlife.net/t/1991-nissan-240sx-hatch-roller-shell-clean/231219/9 "2013-06-16T21:11:49Z")
Think of it this way, If you slide it into something the F’d up piece won’t fall off or need to be zipped tied back on. ---
**Author:** ![RedBaran](https://avatars.discourse-cdn.com/v4/letter/r/e274bd/32.png) [@RedBaran](https://forums.speedlife.net/u/RedBaran)\ **Post date:** [June 16, 2013, 9:51pm UTC](https://forums.speedlife.net/t/1991-nissan-240sx-hatch-roller-shell-clean/231219/10 "2013-06-16T21:51:22Z")
Do you know the color on this? Looks amazing. GLWS ---
**Author:** ![Viggs](https://avatars.discourse-cdn.com/v4/letter/v/ac91a4/32.png) [@Viggs](https://forums.speedlife.net/u/Viggs)\ **Post date:** [June 16, 2013, 10:50pm UTC](https://forums.speedlife.net/t/1991-nissan-240sx-hatch-roller-shell-clean/231219/11 "2013-06-16T22:50:46Z")
350z Daytona blue ---
**Author:** ![1QIKZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1qikz/32/6112_2.png) [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)\ **Post date:** [June 17, 2013, 4:51am UTC](https://forums.speedlife.net/t/1991-nissan-240sx-hatch-roller-shell-clean/231219/12 "2013-06-17T04:51:59Z")
Didn’t I see you dyno this car at turbocivs in Lancaster a couple years ago? ---
**Author:** ![Viggs](https://avatars.discourse-cdn.com/v4/letter/v/ac91a4/32.png) [@Viggs](https://forums.speedlife.net/u/Viggs)\ **Post date:** [June 17, 2013, 8:21am UTC](https://forums.speedlife.net/t/1991-nissan-240sx-hatch-roller-shell-clean/231219/13 "2013-06-17T08:21:29Z")
Yup you sure did! ---
**Author:** ![1QIKZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1qikz/32/6112_2.png) [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)\ **Post date:** [June 17, 2013, 11:25am UTC](https://forums.speedlife.net/t/1991-nissan-240sx-hatch-roller-shell-clean/231219/14 "2013-06-17T11:25:47Z")
I thought so. Very nice ride. Wish I had the extra cash. GLWS.