# 1992 sr20det coupe - $3800 takes it **URL:** \ **Category:** Classifieds\ **Created:** [July 15, 2007, 7:22am UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681 "2007-07-15T07:22:13Z")\ **Posts on this page:** 19\ **Page:** 1
**Author:** ![matty](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/matty/32/5043_2.png) [@matty](https://forums.speedlife.net/u/matty)\ **Post date:** [July 15, 2007, 7:22am UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681/1 "2007-07-15T07:22:13Z")
hey guys same car i had up for sale before, except i am removing the fmic and 2.5" exhaust. The car will comes with the smic and oem exhauts from my 180sx. This is why the price is now $3800 firm. I can gaurentee you this will not last lng because this is one of the few, if not the only, times you will see an sr powered, rust free bodied 240 on these boards. ka24 240’s sell for this much, if not more 1992 Nissan 240sx coupe Please take the time to read everything, no test pilots, priced to sell fast! Specs: 270,000k’s on body, 100,000 k’s on sr champaigne/gold Engine/Transmission: sr20det brand new wiring harness digital speedo with HUD (hud unit is supposed to be shipped to me) ss manifold hks catch can smic vg30 maxima clutch (less then 1000k) vlsd 300zx tt fuel filter walbro fuel pump brand new ngk iridium plugs brand new belts manifold has steel idel adjustment screw, not plastic recently oil changed with mobil 1 sythetic p/s and coolant has been changed new turbo and manifold gaskets no grinding gears, strong clutch, motor runs perfectly fine Suspension: megan racing lowering springs kyb nismo shocks new tie rods ends, balljoints, and control arms (uninstalled) oem wheels Brakes: front ceramic pads front premium rotors Interior: dual pod gauge pillar oem steats black interior conversion, 97% complete carpet removed cd deck (panasonic?) shift light boost gauge (uninstalled) Chasis/body: floor rust has been cut out and 18 guage steel spot welded in, also riveted for added strength most seams have been re-sealed with oem approved seam sealer front stb (thick) vented hood h4 conversion Body is mint, 99% rust free Qaurters and rockers are rust free motor pulls very hard, no noises, over 500 man hours put into the swap comes e-tested (e-tested as a 2.0L motor, hotrod status) ![http://i86.photobucket.com/albums/k117/matty240sx/parts064.jpg](http://i86.photobucket.com/albums/k117/matty240sx/parts064.jpg) ![http://i86.photobucket.com/albums/k117/matty240sx/parts061.jpg](http://i86.photobucket.com/albums/k117/matty240sx/parts061.jpg) ![http://i86.photobucket.com/albums/k117/matty240sx/parts063.jpg](http://i86.photobucket.com/albums/k117/matty240sx/parts063.jpg) ![http://i86.photobucket.com/albums/k117/matty240sx/parts060.jpg](http://i86.photobucket.com/albums/k117/matty240sx/parts060.jpg) ![http://i86.photobucket.com/albums/k117/matty240sx/parts051.jpg](http://i86.photobucket.com/albums/k117/matty240sx/parts051.jpg) ![http://i86.photobucket.com/albums/k117/matty240sx/parts049.jpg](http://i86.photobucket.com/albums/k117/matty240sx/parts049.jpg) ![http://i86.photobucket.com/albums/k117/matty240sx/parts048.jpg](http://i86.photobucket.com/albums/k117/matty240sx/parts048.jpg) ![http://i86.photobucket.com/albums/k117/matty240sx/parts045.jpg](http://i86.photobucket.com/albums/k117/matty240sx/parts045.jpg) ![http://i86.photobucket.com/albums/k117/matty240sx/parts046.jpg](http://i86.photobucket.com/albums/k117/matty240sx/parts046.jpg) ![http://i86.photobucket.com/albums/k117/matty240sx/parts042.jpg](http://i86.photobucket.com/albums/k117/matty240sx/parts042.jpg) ![http://i86.photobucket.com/albums/k117/matty240sx/parts039.jpg](http://i86.photobucket.com/albums/k117/matty240sx/parts039.jpg) ![http://i86.photobucket.com/albums/k117/matty240sx/parts036.jpg](http://i86.photobucket.com/albums/k117/matty240sx/parts036.jpg) ![http://i86.photobucket.com/albums/k117/matty240sx/parts037.jpg](http://i86.photobucket.com/albums/k117/matty240sx/parts037.jpg) ![http://i86.photobucket.com/albums/k117/matty240sx/parts038.jpg](http://i86.photobucket.com/albums/k117/matty240sx/parts038.jpg) frame rails are fine as they stand now, but i personally would plate them i have tonnes fo nice aftermarket parts for this car and motor, so check out my for sale thread! [http://www.forums.son240sx.ca/showthread.php?p=243414#post243414](http://www.forums.son240sx.ca/showthread.php?p=243414#post243414) $3800 firm, no lowballers, no offers im selling it because im going to try to get my 180sx a candian vin and start fresh with it. If the 180sx doesnt work out, then i may leave nissan’s for a bit. undecided. again, no trades, no offers, no posting here unless your interested. i will ask mods to delete any posts that simpy fill space. pm is key ---
**Author:** ![Osad](https://avatars.discourse-cdn.com/v4/letter/o/3ab097/32.png) [@Osad](https://forums.speedlife.net/u/Osad)\ **Post date:** [July 15, 2007, 9:43am UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681/2 "2007-07-15T09:43:04Z")
WOW what a price!! Does this mean the 2.5" will be back up for sale? ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [July 15, 2007, 9:49am UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681/3 "2007-07-15T09:49:20Z")
where’d those hood vents come from? ---
**Author:** ![matty](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/matty/32/5043_2.png) [@matty](https://forums.speedlife.net/u/matty)\ **Post date:** [July 15, 2007, 9:59am UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681/4 "2007-07-15T09:59:58Z")
i made me my half assed attempt, but there wicked functional and yes dan, it will be off the car very soon, as soon as i can get my 180’s exhaust off ---
**Author:** ![nwmrkt](https://avatars.discourse-cdn.com/v4/letter/n/aca169/32.png) [@nwmrkt](https://forums.speedlife.net/u/nwmrkt)\ **Post date:** [July 15, 2007, 11:46pm UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681/5 "2007-07-15T23:46:17Z")
this is a frikin sick deal. what does this mean? im curios…“most seams have been re-sealed with oem approved seam sealer”. Also “floor rust has been cut out and 18 guage steel spot welded in, also riveted for added strength” ,when something has to be done like that but repaired properly it doesn’t affect the car right? It always drives like it should? ---
**Author:** ![matty](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/matty/32/5043_2.png) [@matty](https://forums.speedlife.net/u/matty)\ **Post date:** [July 16, 2007, 6:07am UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681/6 "2007-07-16T06:07:18Z")
the floor started to rust like most 240’s instead of the half assed fixes you seer with 75% of these cars, mine was done right, i compleetly cut those sections of floor right out, riveted in 18 gauge steel, and then stitch welded the steel hen i re-sealed the new metea with oem sealer and did other seams while i was at it. and no it wont affect the car ive drieven it several ttimes sinc e the repair ---
**Author:** ![nwmrkt](https://avatars.discourse-cdn.com/v4/letter/n/aca169/32.png) [@nwmrkt](https://forums.speedlife.net/u/nwmrkt)\ **Post date:** [July 16, 2007, 11:49am UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681/7 "2007-07-16T11:49:18Z")
^ ic this makes it more of a deal ;). When you said you sealed other seams is that those like “hard glue” like substance all over the car that hold it together? That line of stuff… ---
**Author:** ![matty](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/matty/32/5043_2.png) [@matty](https://forums.speedlife.net/u/matty)\ **Post date:** [July 16, 2007, 8:09pm UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681/8 "2007-07-16T20:09:07Z")
thats them ---
**Author:** ![matty](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/matty/32/5043_2.png) [@matty](https://forums.speedlife.net/u/matty)\ **Post date:** [July 17, 2007, 8:26pm UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681/9 "2007-07-17T20:26:06Z")
guys kapeta just got his car’s rust forxed for 300 and there was a lot of work it would cost less then that to properly fix these raisl this is a deal and half, you wont find another running, everytihng works, sr powered car in this condition on son i promise ---
**Author:** ![timmy\_sivad](https://avatars.discourse-cdn.com/v4/letter/t/f08c70/32.png) [@timmy\_sivad](https://forums.speedlife.net/u/timmy_sivad)\ **Post date:** [July 19, 2007, 8:00pm UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681/10 "2007-07-19T20:00:31Z")
hey man JW whats up with the front fender and qurter panels (the alignment)… and also would you accept a Down Payment ---
**Author:** ![matty](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/matty/32/5043_2.png) [@matty](https://forums.speedlife.net/u/matty)\ **Post date:** [July 19, 2007, 8:29pm UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681/11 "2007-07-19T20:29:57Z")
yes i could take a depsoit the bumper is not bolt on at all in those pics, thats why it looks on the fenders and the fender caps are missing in the pics pm me if you would like to work something out ---
**Author:** ![boba240](https://avatars.discourse-cdn.com/v4/letter/b/7993a0/32.png) [@boba240](https://forums.speedlife.net/u/boba240)\ **Post date:** [July 20, 2007, 9:19am UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681/12 "2007-07-20T09:19:17Z")
this car is a piece of shit and ya im going to chirp it because I can. ---
**Author:** ![Gonad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gonad/32/5481_2.png) [@Gonad](https://forums.speedlife.net/u/Gonad)\ **Post date:** [July 20, 2007, 10:49am UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681/13 "2007-07-20T10:49:47Z")
> [@Need quick Digi Cam advice plz](https://forums.speedlife.net/t/need-quick-digi-cam-advice-plz/13334/3): > > this car is a piece of shit and ya im going to chirp it because I can. And I’m going to ban you because I can, if you continue this type of trolling :ugh: ---
**Author:** ![matty](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/matty/32/5043_2.png) [@matty](https://forums.speedlife.net/u/matty)\ **Post date:** [July 20, 2007, 10:51am UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681/14 "2007-07-20T10:51:37Z")
thanks g, much appretiated ---
**Author:** ![Snowblind](https://avatars.discourse-cdn.com/v4/letter/s/a6a055/32.png) [@Snowblind](https://forums.speedlife.net/u/Snowblind)\ **Post date:** [July 22, 2007, 5:42pm UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681/15 "2007-07-22T17:42:02Z")
What would it need to certify? ---
**Author:** ![matty](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/matty/32/5043_2.png) [@matty](https://forums.speedlife.net/u/matty)\ **Post date:** [July 22, 2007, 5:45pm UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681/16 "2007-07-22T17:45:40Z")
dunno, everything works electronic wise, motor wise, and suspension wise the last owner safetied it and its still the same as when i bougt it from him ,its actually in better shaoe now srry i couldnt help ---
**Author:** ![duckJAI](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/duckjai/32/5553_2.png) [@duckJAI](https://forums.speedlife.net/u/duckJAI)\ **Post date:** [July 22, 2007, 8:00pm UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681/17 "2007-07-22T20:00:53Z")
damn if i didn’t have debt i’d probably grab it and just make it into a track only car. sick deal i’m still thinking about it. lol ---
**Author:** ![matty](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/matty/32/5043_2.png) [@matty](https://forums.speedlife.net/u/matty)\ **Post date:** [July 23, 2007, 7:06am UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681/18 "2007-07-23T07:06:15Z")
thanks, the price is right ---
**Author:** ![roast](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/roast/32/5498_2.png) [@roast](https://forums.speedlife.net/u/roast)\ **Post date:** [July 23, 2007, 7:53am UTC](https://forums.speedlife.net/t/1992-sr20det-coupe-3800-takes-it/107681/19 "2007-07-23T07:53:34Z")
Please follow FS forum rules, edit your thread and I will unlock.