# 1993 s13 parting out **URL:** \ **Category:** Classifieds\ **Created:** [April 25, 2006, 1:35pm UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260 "2006-04-25T13:35:06Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![TJ\_HOOKER](https://avatars.discourse-cdn.com/v4/letter/t/a8b319/32.png) [@TJ\_HOOKER](https://forums.speedlife.net/u/TJ_HOOKER)\ **Post date:** [April 25, 2006, 1:35pm UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/1 "2006-04-25T13:35:06Z")
1993 s13 coupe rolling chassis with veilside body kit 1500 includes glass (windscreen is knackered) comes with doors trunk lid and hood no seats or centre console but includes brown dash also includes eibach springs 2" drop sr20 det blacktop with 5 speed tranny( has razo short shift and knob), good clutch, harness and comp. 2800 will seperate make offer on engine, it’s very strong, always run synthetic guage pod fits in heat vent (see pics) 75 black out guages temp, air fuel, boost, **75** for all 3 3" down pipe and 2.5" magnaflow cat back with good muffler 200 walbro fuel pump and tank 100 leather interior custom, light brown and creme, very classy looking and in great shape , **1250** greddy fmic and piping 200 greddy type s bov 125 koyo alum rad 250 18" msr rims with 225 40 18 on front and bald 255 40 18 on rear 1100 . i am prolly forgetting a few things, will add later some pics here [http://www.upnorthimports.com/forums/showthread.php?t=4885](http://www.upnorthimports.com/forums/showthread.php?t=4885) **ALL PRICES ARE OBO, make an offer, if you are not on crack, i may accept it.** thanx for reading jeff ---
**Author:** ![reconJDM](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/reconjdm/32/5510_2.png) [@reconJDM](https://forums.speedlife.net/u/reconJDM)\ **Post date:** [April 25, 2006, 3:17pm UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/2 "2006-04-25T15:17:02Z")
pm’d about greddy fmic. ---
**Author:** ![seth](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/seth/32/3175_2.png) [@seth](https://forums.speedlife.net/u/seth)\ **Post date:** [April 25, 2006, 3:52pm UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/3 "2006-04-25T15:52:54Z")
center guage pod 30 bucks? what ya say? ---
**Author:** ![nocwage](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nocwage/32/5489_2.png) [@nocwage](https://forums.speedlife.net/u/nocwage)\ **Post date:** [April 25, 2006, 4:40pm UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/4 "2006-04-25T16:40:05Z")
Is the Koyo an SR rad or a KA rad? ---
**Author:** ![TJ\_HOOKER](https://avatars.discourse-cdn.com/v4/letter/t/a8b319/32.png) [@TJ\_HOOKER](https://forums.speedlife.net/u/TJ_HOOKER)\ **Post date:** [April 25, 2006, 5:38pm UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/5 "2006-04-25T17:38:06Z")
sorry seth, pretty firm on the pod, it was firts in production, and it cost me 100 bux. it is not our typical flat one, it molds out, and angles towards the driver, and it looks hot. rad is for sr, it was added later on after the build. ---
**Author:** ![s13Junkyard](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s13junkyard/32/5502_2.png) [@s13Junkyard](https://forums.speedlife.net/u/s13Junkyard)\ **Post date:** [April 25, 2006, 6:51pm UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/6 "2006-04-25T18:51:42Z")
416 890 0934 call me ill take a nice little package off your hands ---
**Author:** ![TJ\_HOOKER](https://avatars.discourse-cdn.com/v4/letter/t/a8b319/32.png) [@TJ\_HOOKER](https://forums.speedlife.net/u/TJ_HOOKER)\ **Post date:** [April 26, 2006, 5:45am UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/7 "2006-04-26T05:45:32Z")
avery, give me a shout on my cell 905 971 9175. i am out all week on jobsites, but will be tearing this down on the weekend. you can email me a list of what you want @ [moore\_electrical@bell.blackberry.net](mailto:moore_electrical@bell.blackberry.net). everyone else, thanx for the speedy replies to this, i am trying to get back to you all as fast as i can. this whole thing can be had for 6000 the way it sits, with nothing missing. part it out yourself, my prices are a bit low, cause i need it gone asafp. suprised no one wants the motor and tranny yet, am i a bit out on the price? or just not a high demand for sr20’s these days? laters ---
**Author:** ![TJ\_HOOKER](https://avatars.discourse-cdn.com/v4/letter/t/a8b319/32.png) [@TJ\_HOOKER](https://forums.speedlife.net/u/TJ_HOOKER)\ **Post date:** [April 26, 2006, 12:32pm UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/8 "2006-04-26T12:32:40Z")
under hood pic before i started cleaning it up ![http://i30.photobucket.com/albums/c339/TJ_HOOKER/17177c4c.jpg](http://i30.photobucket.com/albums/c339/TJ_HOOKER/17177c4c.jpg) this is the only semi current pic i have right now it shows some of the parts listed, rad ic, bov, and engine ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [April 26, 2006, 12:47pm UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/9 "2006-04-26T12:47:55Z")
what are the widths and offsets of the wheels? ---
**Author:** ![TJ\_HOOKER](https://avatars.discourse-cdn.com/v4/letter/t/a8b319/32.png) [@TJ\_HOOKER](https://forums.speedlife.net/u/TJ_HOOKER)\ **Post date:** [April 26, 2006, 1:00pm UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/10 "2006-04-26T13:00:49Z")
rims are 8" wide, and the back space is 6" so, from the back of the rim to the back of the centre is 6". take a look at my pics, you will see what they look like on the car. never used spacers ---
**Author:** ![TJ\_HOOKER](https://avatars.discourse-cdn.com/v4/letter/t/a8b319/32.png) [@TJ\_HOOKER](https://forums.speedlife.net/u/TJ_HOOKER)\ **Post date:** [April 27, 2006, 4:45am UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/11 "2006-04-27T04:45:30Z")
![http://i30.photobucket.com/albums/c339/TJ_HOOKER/Picture006.jpg](http://i30.photobucket.com/albums/c339/TJ_HOOKER/Picture006.jpg) ![http://i30.photobucket.com/albums/c339/TJ_HOOKER/Picture007.jpg](http://i30.photobucket.com/albums/c339/TJ_HOOKER/Picture007.jpg) ![http://i30.photobucket.com/albums/c339/TJ_HOOKER/Picture009.jpg](http://i30.photobucket.com/albums/c339/TJ_HOOKER/Picture009.jpg) :roll: ---
**Author:** ![TJ\_HOOKER](https://avatars.discourse-cdn.com/v4/letter/t/a8b319/32.png) [@TJ\_HOOKER](https://forums.speedlife.net/u/TJ_HOOKER)\ **Post date:** [April 28, 2006, 3:48am UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/12 "2006-04-28T03:48:43Z")
if you are even remotely interested in the engine, come and hear it run before i start riping this car apart. sat morning the fmic and piping, bov, and rad are coming off, so after that you will only be able to hear it turn over, lol. will consider lowering the price on the engine, how’s 2500 obo for the engine tranny combo? ---
**Author:** ![TJ\_HOOKER](https://avatars.discourse-cdn.com/v4/letter/t/a8b319/32.png) [@TJ\_HOOKER](https://forums.speedlife.net/u/TJ_HOOKER)\ **Post date:** [April 28, 2006, 12:53pm UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/13 "2006-04-28T12:53:21Z")
rims and tires sold greddy fmic and piping sold rad and fan, sold thanx ichi-bum, great to deal with ---
**Author:** ![mugsy](https://avatars.discourse-cdn.com/v4/letter/m/9e8a1a/32.png) [@mugsy](https://forums.speedlife.net/u/mugsy)\ **Post date:** [April 28, 2006, 7:19pm UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/14 "2006-04-28T19:19:25Z")
bump for a great seller ---
**Author:** ![ichi-bum](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ichi-bum/32/5543_2.png) [@ichi-bum](https://forums.speedlife.net/u/ichi-bum)\ **Post date:** [April 29, 2006, 5:51am UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/15 "2006-04-29T05:51:53Z")
Thanks Hooker!! Likewise. Excellent communication and awesome guy to deal with. ---
**Author:** ![TJ\_HOOKER](https://avatars.discourse-cdn.com/v4/letter/t/a8b319/32.png) [@TJ\_HOOKER](https://forums.speedlife.net/u/TJ_HOOKER)\ **Post date:** [May 1, 2006, 11:06am UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/16 "2006-05-01T11:06:29Z")
bov now 100 bux interior now 800 bux, found a couple cracks in d/s walbro pump, with out tank 75 bux engine and trans now 2500 bux make offers, this stuff will not last. anyone who has not received a reply to pm’s, i appreciate your patience, and feel free to refresh my memory and pm me again if need be. thanx all jeff ---
**Author:** ![Two4Tchaz](https://avatars.discourse-cdn.com/v4/letter/t/9fc348/32.png) [@Two4Tchaz](https://forums.speedlife.net/u/Two4Tchaz)\ **Post date:** [May 1, 2006, 6:17pm UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/17 "2006-05-01T18:17:35Z")
Pm sent… Twice… Chaz ---
**Author:** ![silky](https://avatars.discourse-cdn.com/v4/letter/s/58956e/32.png) [@silky](https://forums.speedlife.net/u/silky)\ **Post date:** [May 1, 2006, 6:24pm UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/18 "2006-05-01T18:24:48Z")
what shocks do you have with the eibachs? ---
**Author:** ![TJ\_HOOKER](https://avatars.discourse-cdn.com/v4/letter/t/a8b319/32.png) [@TJ\_HOOKER](https://forums.speedlife.net/u/TJ_HOOKER)\ **Post date:** [May 1, 2006, 9:23pm UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/19 "2006-05-01T21:23:35Z")
stock shocks, but the springs go with the chassis, sorry. ---
**Author:** ![TJ\_HOOKER](https://avatars.discourse-cdn.com/v4/letter/t/a8b319/32.png) [@TJ\_HOOKER](https://forums.speedlife.net/u/TJ_HOOKER)\ **Post date:** [May 5, 2006, 8:01am UTC](https://forums.speedlife.net/t/1993-s13-parting-out/95260/20 "2006-05-05T08:01:41Z")
K, here’s what’s left, rolling chassis, with all body panels sr20 det blacktop and transmission 3" down pipe and 2.5" magnaflow cat back interior sr ecu walbro pump anyhow, if someone shows up this weekend with 2500 bux, they can take it all away, that’s right, 2500 firm, takes all of it, but htis weekend only, otherwise, i will be cutting it up and selling it all seperately still. note, there will be no front wheels, so you must have a tow truck come and get it. i need this gone, if you are serious about picking this up, call me today, 905 971 9175 jeff [Next page](https://forums.speedlife.net/t/1993-s13-parting-out/95260.md?page=2)