# 1j into a s13 infos

**URL:** <https://forums.speedlife.net/t/1j-into-a-s13-infos/123045>\
**Category:** SON240sx Automotive\
**Created:** [March 29, 2009, 7:55am UTC](https://forums.speedlife.net/t/1j-into-a-s13-infos/123045 "2009-03-29T07:55:05Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\
**Post date:** [March 29, 2009, 7:55am UTC](https://forums.speedlife.net/t/1j-into-a-s13-infos/123045/1 "2009-03-29T07:55:05Z")

</div>

i have looked around too see what it’ll take to put this bad boy in. not to much info on whats needed to get this sucker to run ie drive shaft, wiring… i know ill need mounts shifter extension. but id like to know if its worth it i maybe pickn up a 1j for cheap…

also if you dont know what ur talking about dont post.

---

<div class="post-metadata">

**Author:** ![nitescream](https://avatars.discourse-cdn.com/v4/letter/n/8797f3/32.png) [@nitescream](https://forums.speedlife.net/u/nitescream)\
**Post date:** [March 29, 2009, 8:07am UTC](https://forums.speedlife.net/t/1j-into-a-s13-infos/123045/2 "2009-03-29T08:07:19Z")

</div>

NOT MUCH INFORMATION… are u fucking kidding me, you just dont damn look up anything and want it handed to you!! filling up SON240 with non-sense questions!!

[www.2jzswap.com](http://www.2jzswap.com)

there are two different type of mount setups for this swap

1. from 2jzswap which gets you driveshaft, shifter extension, modified front cross member, tranny mount $1500

2. which you only get mounts - NO shaft, extenison $500 off Ebay and they work and strong

I know people that used both ways and they both work, you just need the money!!  
oh and be sure to have alot of cash to get the harness done proper!!

---

<div class="post-metadata">

**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\
**Post date:** [March 29, 2009, 8:15am UTC](https://forums.speedlife.net/t/1j-into-a-s13-infos/123045/3 "2009-03-29T08:15:32Z")

</div>

thanks for the site… im at work so looking into this is kinda hard.

ok so i looked throught all 5 pages of install q’s and what not. pretty much id need the 1550 install kit and the harness at 450. everything else i could make myself.

but my question is can i still use the ka cluster?  
id like to keep is stock as possible

---

<div class="post-metadata">

**Author:** ![draggone](https://avatars.discourse-cdn.com/v4/letter/d/5fc32e/32.png) [@draggone](https://forums.speedlife.net/u/draggone)\
**Post date:** [March 29, 2009, 1:14pm UTC](https://forums.speedlife.net/t/1j-into-a-s13-infos/123045/4 "2009-03-29T13:14:08Z")

</div>

yes you can

---

<div class="post-metadata">

**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\
**Post date:** [March 30, 2009, 6:55am UTC](https://forums.speedlife.net/t/1j-into-a-s13-infos/123045/5 "2009-03-30T06:55:26Z")

</div>

ok thanks da for the pm and dragone for ur help in answering my q’s  
nitescream thanks for the link and being a bozo