# 1st Gen Widebody Rx-7 $2000 OBO **URL:** \ **Category:** Classifieds\ **Created:** [May 28, 2006, 7:20am UTC](https://forums.speedlife.net/t/1st-gen-widebody-rx-7-2000-obo/96382 "2006-05-28T07:20:48Z")\ **Posts on this page:** 17\ **Page:** 1
**Author:** ![beijing\_2008](https://avatars.discourse-cdn.com/v4/letter/b/4da419/32.png) [@beijing\_2008](https://forums.speedlife.net/u/beijing_2008)\ **Post date:** [May 28, 2006, 7:20am UTC](https://forums.speedlife.net/t/1st-gen-widebody-rx-7-2000-obo/96382/1 "2006-05-28T07:20:48Z")
1983 Mazda Widebody Rx-7 Red Exterior/Burgundy Leather interior 5 speed – No power options 110 XXX KM Stock motor with stock parts. Original paint, Original motor. No rust underbody, clean and clear of rust. Car has Deep-dish rims 225R16 (front) and 265R16 (rear). Rims cost over fifteen-hundred. Car is not in running condition but I did start it up month ago. I work at Mazda and got a mechanic to check it out. Carb needs rebuilding. Honestly I have no intentions of selling this car but my father just bought a Miata for the mom and we have ran out of room. The car is selling AS IS. $2000 obo (best ofer takes her) You will not find a perfect project car like this, even went to the junkyard and got extra parts and got a Chilton’s manual, new plugs, wires, rotor and battery 1 month ago PICTURES CAN BE FOUND AT THIS LINK! -\>\> [http://www.rxclubofontario.com/rxforum/viewtopic.php?p=2423](http://www.rxclubofontario.com/rxforum/viewtopic.php?p=2423) I am located in Whitby, On. Call Evenings & Weekends(905) 404 1483 Kiel ```auto ``` ---
**Author:** ![Original\_Nutta](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/original_nutta/32/5474_2.png) [@Original\_Nutta](https://forums.speedlife.net/u/Original_Nutta)\ **Post date:** [May 28, 2006, 10:35am UTC](https://forums.speedlife.net/t/1st-gen-widebody-rx-7-2000-obo/96382/2 "2006-05-28T10:35:44Z")
link sucks, need reg. ---
**Author:** ![beijing\_2008](https://avatars.discourse-cdn.com/v4/letter/b/4da419/32.png) [@beijing\_2008](https://forums.speedlife.net/u/beijing_2008)\ **Post date:** [May 28, 2006, 11:02am UTC](https://forums.speedlife.net/t/1st-gen-widebody-rx-7-2000-obo/96382/3 "2006-05-28T11:02:40Z")
how do you attach pictures? ---
**Author:** ![ziptied](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ziptied/32/5509_2.png) [@ziptied](https://forums.speedlife.net/u/ziptied)\ **Post date:** [May 28, 2006, 12:51pm UTC](https://forums.speedlife.net/t/1st-gen-widebody-rx-7-2000-obo/96382/4 "2006-05-28T12:51:38Z")
can you send pics to me [will6889@yahoo.com](mailto:will6889@yahoo.com) thanks ---
**Author:** ![beijing\_2008](https://avatars.discourse-cdn.com/v4/letter/b/4da419/32.png) [@beijing\_2008](https://forums.speedlife.net/u/beijing_2008)\ **Post date:** [May 28, 2006, 2:00pm UTC](https://forums.speedlife.net/t/1st-gen-widebody-rx-7-2000-obo/96382/5 "2006-05-28T14:00:14Z")
can i send someone the pictures to put them up for me?? thanks guys ---
**Author:** ![crsbb](https://avatars.discourse-cdn.com/v4/letter/c/b9bd4f/32.png) [@crsbb](https://forums.speedlife.net/u/crsbb)\ **Post date:** [May 28, 2006, 3:04pm UTC](https://forums.speedlife.net/t/1st-gen-widebody-rx-7-2000-obo/96382/6 "2006-05-28T15:04:59Z")
![http://img516.imageshack.us/img516/403/img02271357vx.jpg](http://img516.imageshack.us/img516/403/img02271357vx.jpg) ![http://img516.imageshack.us/img516/9232/4561636ud.jpg](http://img516.imageshack.us/img516/9232/4561636ud.jpg) ![http://img517.imageshack.us/img517/3083/26913bs.jpg](http://img517.imageshack.us/img517/3083/26913bs.jpg) ---
**Author:** ![ziptied](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ziptied/32/5509_2.png) [@ziptied](https://forums.speedlife.net/u/ziptied)\ **Post date:** [May 28, 2006, 6:42pm UTC](https://forums.speedlife.net/t/1st-gen-widebody-rx-7-2000-obo/96382/7 "2006-05-28T18:42:11Z")
would you part out the rims? and if so how much are you looking for? ---
**Author:** ![crsbb](https://avatars.discourse-cdn.com/v4/letter/c/b9bd4f/32.png) [@crsbb](https://forums.speedlife.net/u/crsbb)\ **Post date:** [May 28, 2006, 6:55pm UTC](https://forums.speedlife.net/t/1st-gen-widebody-rx-7-2000-obo/96382/8 "2006-05-28T18:55:31Z")
I already pmd him hes not parting them. I dont believe they would fit a 240 either as they are 4 x 100 ---
**Author:** ![Heatw](https://avatars.discourse-cdn.com/v4/letter/h/cdc98d/32.png) [@Heatw](https://forums.speedlife.net/u/Heatw)\ **Post date:** [May 28, 2006, 7:19pm UTC](https://forums.speedlife.net/t/1st-gen-widebody-rx-7-2000-obo/96382/9 "2006-05-28T19:19:52Z")
if they are bolted to the original rx7 hubs… they aren’t even 4x100, those early rx7’s had a very wack bolt pattern 4x110 iirc i don’t even recall another car that uses it but there must be one just not one i’m familliar with… ---
**Author:** ![beijing\_2008](https://avatars.discourse-cdn.com/v4/letter/b/4da419/32.png) [@beijing\_2008](https://forums.speedlife.net/u/beijing_2008)\ **Post date:** [May 28, 2006, 7:33pm UTC](https://forums.speedlife.net/t/1st-gen-widebody-rx-7-2000-obo/96382/10 "2006-05-28T19:33:00Z")
The body is mint it just needs a carb rebuild - if anyone would like to make an offer for the car i would be glad to negotiate… you have to see the car in person to appreciate it somebody make me an offer… I was also thinking about putting the rims on a 240 they are 4" deep lip and 7 1/4" in the rear… (905) 622 5332 Cell ---
**Author:** ![Jesse](https://avatars.discourse-cdn.com/v4/letter/j/c77e96/32.png) [@Jesse](https://forums.speedlife.net/u/Jesse)\ **Post date:** [May 28, 2006, 10:21pm UTC](https://forums.speedlife.net/t/1st-gen-widebody-rx-7-2000-obo/96382/11 "2006-05-28T22:21:17Z")
man those wheels would be baller on my first gen ---
**Author:** ![beijing\_2008](https://avatars.discourse-cdn.com/v4/letter/b/4da419/32.png) [@beijing\_2008](https://forums.speedlife.net/u/beijing_2008)\ **Post date:** [May 29, 2006, 4:07am UTC](https://forums.speedlife.net/t/1st-gen-widebody-rx-7-2000-obo/96382/12 "2006-05-29T04:07:27Z")
the wide body on this car is MINT - please someone make me an offer for the car we have no room ---
**Author:** ![R33](https://avatars.discourse-cdn.com/v4/letter/r/5f8ce5/32.png) [@R33](https://forums.speedlife.net/u/R33)\ **Post date:** [May 29, 2006, 7:42am UTC](https://forums.speedlife.net/t/1st-gen-widebody-rx-7-2000-obo/96382/13 "2006-05-29T07:42:22Z")
> [@Heatw](#): > > if they are bolted to the original rx7 hubs… they aren’t even 4x100, those early rx7’s had a very wack bolt pattern 4x110 iirc i don’t even recall another car that uses it but there must be one just not one i’m familliar with… ^ he is right they wont fit a 240sx ---
**Author:** ![Solarian](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/solarian/32/5514_2.png) [@Solarian](https://forums.speedlife.net/u/Solarian)\ **Post date:** [May 29, 2006, 7:58am UTC](https://forums.speedlife.net/t/1st-gen-widebody-rx-7-2000-obo/96382/14 "2006-05-29T07:58:28Z")
This car would be nuts with a n/a 3 rotor under the hood, it’d go and sound better than literally anything you pull up next to. ---
**Author:** ![beijing\_2008](https://avatars.discourse-cdn.com/v4/letter/b/4da419/32.png) [@beijing\_2008](https://forums.speedlife.net/u/beijing_2008)\ **Post date:** [May 29, 2006, 4:18pm UTC](https://forums.speedlife.net/t/1st-gen-widebody-rx-7-2000-obo/96382/15 "2006-05-29T16:18:36Z")
someone take the car for $1500 - i need it out i have no room ---
**Author:** ![240SXtacy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/240sxtacy/32/5549_2.png) [@240SXtacy](https://forums.speedlife.net/u/240SXtacy)\ **Post date:** [May 30, 2006, 6:22am UTC](https://forums.speedlife.net/t/1st-gen-widebody-rx-7-2000-obo/96382/16 "2006-05-30T06:22:49Z")
^ stop bumping ur thread read the rules before u get locked ---
**Author:** ![martiniracing](https://avatars.discourse-cdn.com/v4/letter/m/5f9b8f/32.png) [@martiniracing](https://forums.speedlife.net/u/martiniracing)\ **Post date:** [May 30, 2006, 7:19pm UTC](https://forums.speedlife.net/t/1st-gen-widebody-rx-7-2000-obo/96382/17 "2006-05-30T19:19:15Z")
wow, that’s pretty sweet… are you from brampton, casue i’ve seen something similar before