# 2 Car Garage Build

**URL:** <https://forums.speedlife.net/t/2-car-garage-build/234242>\
**Category:** NYSpeed Off Topic\
**Created:** [December 13, 2013, 10:08am UTC](https://forums.speedlife.net/t/2-car-garage-build/234242 "2013-12-13T10:08:08Z")\
**Posts on this page:** 20\
**Page:** 5

<div class="post-metadata">

**Author:** ![GV1390](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gv1390/32/5432_2.png) [@GV1390](https://forums.speedlife.net/u/GV1390)\
**Post date:** [October 1, 2015, 6:57am UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/81 "2015-10-01T06:57:04Z")

</div>

The dearth of PBR tall-boys is really unfortunate.

☹

carry on…

---

<div class="post-metadata">

**Author:** ![Norb\_O](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/norb_o/32/5189_2.png) [@Norb\_O](https://forums.speedlife.net/u/Norb_O)\
**Post date:** [October 1, 2015, 8:10am UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/82 "2015-10-01T08:10:13Z")

</div>

> [@GV1390](#):
>
> The dearth of PBR tall-boys is really unfortunate.
> 
> ☹
> 
> carry on…

you are right…it has been a while. If it makes you feel better I have been drinking room temperature canned blue lights in an authentic Sam Adams glass i brought back from the brewery in Boston. Trying my best to piss off the purists

---

<div class="post-metadata">

**Author:** ![GV1390](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gv1390/32/5432_2.png) [@GV1390](https://forums.speedlife.net/u/GV1390)\
**Post date:** [October 1, 2015, 8:13am UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/83 "2015-10-01T08:13:30Z")

</div>

Pics or it didn’t happen.

---

<div class="post-metadata">

**Author:** ![Norb\_O](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/norb_o/32/5189_2.png) [@Norb\_O](https://forums.speedlife.net/u/Norb_O)\
**Post date:** [October 5, 2015, 7:15am UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/84 "2015-10-05T07:15:50Z")

</div>

I spent a few hours on the MIG yesterday putting on the cross bracing (1/2" rod)

[![https://farm6.staticflickr.com/5826/21763084958_78b2f637ce_b.jpg](https://farm6.staticflickr.com/5826/21763084958_78b2f637ce_b.jpg)](https://flic.kr/p/za8uWJ)[image](https://flic.kr/p/za8uWJ) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr

And after a Rustoleum Flat Black Enamel

[![https://farm6.staticflickr.com/5640/21950946725_d9d3af2725_b.jpg](https://farm6.staticflickr.com/5640/21950946725_d9d3af2725_b.jpg)](https://flic.kr/p/zrJkGH)[image](https://flic.kr/p/zrJkGH) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr

Need to finish digging out the stone, level and tamp, and start suspending the plates. I am also lining up a contractor for the pour in the next 2 weeks.

---

<div class="post-metadata">

**Author:** ![Spam16v](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spam16v/32/5287_2.png) [@Spam16v](https://forums.speedlife.net/u/Spam16v)\
**Post date:** [October 5, 2015, 9:24am UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/85 "2015-10-05T09:24:07Z")

</div>

That’s an awful lot of work for only 4’

---

<div class="post-metadata">

**Author:** ![Norb\_O](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/norb_o/32/5189_2.png) [@Norb\_O](https://forums.speedlife.net/u/Norb_O)\
**Post date:** [October 5, 2015, 9:45am UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/86 "2015-10-05T09:45:38Z")

</div>

Zach, 4’ is all that my ceiling will allow anyways. It sure beats jackstands.

---

<div class="post-metadata">

**Author:** ![1QIKZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1qikz/32/6112_2.png) [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)\
**Post date:** [October 5, 2015, 10:02am UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/87 "2015-10-05T10:02:14Z")

</div>

> [@Norb O](#):
>
> I spent a few hours on the MIG yesterday putting on the cross bracing (1/2" rod)
> 
> [![https://farm6.staticflickr.com/5826/21763084958_78b2f637ce_b.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/9/3/93a70605b224bb4d716fd1fc3c64a87bba580e02.jpeg)](https://flic.kr/p/za8uWJ)[image](https://flic.kr/p/za8uWJ) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr
> 
> And after a Rustoleum Flat Black Enamel
> 
> [![https://farm6.staticflickr.com/5640/21950946725_d9d3af2725_b.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/5/d/5d2e83e0586abcc96cacdc4d8d817bf77d700f81.jpeg)](https://flic.kr/p/zrJkGH)[image](https://flic.kr/p/zrJkGH) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr
> 
> Need to finish digging out the stone, level and tamp, and start suspending the plates. I am also lining up a contractor for the pour in the next 2 weeks.

I thought about doing something like this but the logistics didn’t work. Placement wouldve needed to be perfect and just knew it wouldn’t happen.

---

<div class="post-metadata">

**Author:** ![Norb\_O](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/norb_o/32/5189_2.png) [@Norb\_O](https://forums.speedlife.net/u/Norb_O)\
**Post date:** [October 5, 2015, 10:15am UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/88 "2015-10-05T10:15:44Z")

</div>

It’s tough in these residential garages. I thought about renting a large shop space but realized that I’d never have the motivation to go there in the winter months, so this made the most sense for me. Yes, it’s a tight fit but walking out of the kitchen with a cup of coffee in PJ pants on a saturday morning and tinkering sure beats having to drive 15 mins somewhere to do the same.

---

<div class="post-metadata">

**Author:** ![1QIKZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1qikz/32/6112_2.png) [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)\
**Post date:** [October 5, 2015, 10:28am UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/89 "2015-10-05T10:28:23Z")

</div>

I did 40 minutes each way. It was OK when I had my business but after that it was a headache. I’m with you. Close the door and walk in your house.

---

<div class="post-metadata">

**Author:** ![Spam16v](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spam16v/32/5287_2.png) [@Spam16v](https://forums.speedlife.net/u/Spam16v)\
**Post date:** [October 5, 2015, 1:21pm UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/90 "2015-10-05T13:21:06Z")

</div>

I’m under my lift in my adidas flip flops all the time. I would never drive somewhere to hate myself.

---

<div class="post-metadata">

**Author:** ![Norb\_O](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/norb_o/32/5189_2.png) [@Norb\_O](https://forums.speedlife.net/u/Norb_O)\
**Post date:** [October 5, 2015, 1:34pm UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/91 "2015-10-05T13:34:00Z")

</div>

> [@Spam16v](#):
>
> I would never drive somewhere to hate myself.

this

plus working on piles of junk is more fun when you can get hammered in the safety and security of your own home.

---

<div class="post-metadata">

**Author:** ![cougarspeed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cougarspeed/32/7468_2.png) [@cougarspeed](https://forums.speedlife.net/u/cougarspeed)\
**Post date:** [October 5, 2015, 1:55pm UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/92 "2015-10-05T13:55:04Z")

</div>

> [@Norb O](#):
>
> this
> 
> plus working on piles of junk is more fun when you can get hammered in the safety and security of your own home.

Amen

---

<div class="post-metadata">

**Author:** ![TrueBlue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/trueblue/32/7245_2.png) [@TrueBlue](https://forums.speedlife.net/u/TrueBlue)\
**Post date:** [October 6, 2015, 7:20am UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/93 "2015-10-06T07:20:14Z")

</div>

I don’t think I’d even own a car if I didn’t have a garage. If I had to drive somewhere to wrench I’d ride a horse and clean up poop.

---

<div class="post-metadata">

**Author:** ![Norb\_O](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/norb_o/32/5189_2.png) [@Norb\_O](https://forums.speedlife.net/u/Norb_O)\
**Post date:** [October 13, 2015, 10:16am UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/94 "2015-10-13T10:16:00Z")

</div>

lots of progress this past week, the hardest work is done

laid down some quikrete on the sides of the hole to prevent stone from falling out from under the existing slab  
[![https://farm6.staticflickr.com/5674/22144014231_be52788380_b.jpg](https://farm6.staticflickr.com/5674/22144014231_be52788380_b.jpg)](https://flic.kr/p/zJMRWP)[image](https://flic.kr/p/zJMRWP) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr

20 wheelbarrow loads later the stone pile is finally gone. my back still hurts thinking about it  
[![https://farm1.staticflickr.com/698/21945726140_a50c0c10a4_b.jpg](https://farm1.staticflickr.com/698/21945726140_a50c0c10a4_b.jpg)](https://flic.kr/p/zrgzNC)[image](https://flic.kr/p/zrgzNC) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr

supported it via jig on the rear set of holes. this was not too stable and it turns out the extra set of holes in the plate was a blessing in disguise.  
[![https://farm1.staticflickr.com/605/22133905735_c5789204e8_b.jpg](https://farm1.staticflickr.com/605/22133905735_c5789204e8_b.jpg)](https://flic.kr/p/zHU43p)[image](https://flic.kr/p/zHU43p) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr

I welded some nuts to the underside of the front most set of holes and suspended the plates evenly. much more stable!  
[![https://farm1.staticflickr.com/723/21945713750_bb57896ceb_b.jpg](https://farm1.staticflickr.com/723/21945713750_bb57896ceb_b.jpg)](https://flic.kr/p/zrgw81)[image](https://flic.kr/p/zrgw81) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr

From there it was a ton of time with a wrench and level setting the heights equal, and angles to zero  
[![https://farm6.staticflickr.com/5736/21511123534_aea5fda3c2_b.jpg](https://farm6.staticflickr.com/5736/21511123534_aea5fda3c2_b.jpg)](https://flic.kr/p/yLS8Af)[image](https://flic.kr/p/yLS8Af) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr

[![https://farm1.staticflickr.com/695/21946958889_2b9a531eb4.jpg](https://farm1.staticflickr.com/695/21946958889_2b9a531eb4.jpg)](https://flic.kr/p/zrnUfV)[image](https://flic.kr/p/zrnUfV) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr

[![https://farm6.staticflickr.com/5693/22133932025_b505c0742a_b.jpg](https://farm6.staticflickr.com/5693/22133932025_b505c0742a_b.jpg)](https://flic.kr/p/zHUbRF)[image](https://flic.kr/p/zHUbRF) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr

[![https://farm1.staticflickr.com/597/21945760180_525d456b13_b.jpg](https://farm1.staticflickr.com/597/21945760180_525d456b13_b.jpg)](https://flic.kr/p/zrgKVw)[image](https://flic.kr/p/zrgKVw) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr

cut and laid in all the rebar  
[![https://farm1.staticflickr.com/723/21945713750_bb57896ceb_b.jpg](https://farm1.staticflickr.com/723/21945713750_bb57896ceb_b.jpg)](https://flic.kr/p/zrgw81)[image](https://flic.kr/p/zrgw81) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr

FourEyed’s guy came and did the pour yesterday with a helper, it turned out nice. after it had taken a set, i removed the jigs so the guys could finish it more nicely.

[![https://farm1.staticflickr.com/578/22107696496_1bd9bfd4bd_b.jpg](https://farm1.staticflickr.com/578/22107696496_1bd9bfd4bd_b.jpg)](https://flic.kr/p/zFzHWY)[image](https://flic.kr/p/zFzHWY) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr

[![https://farm1.staticflickr.com/577/22144052381_21bc2baea0_b.jpg](https://farm1.staticflickr.com/577/22144052381_21bc2baea0_b.jpg)](https://flic.kr/p/zJN4hz)[image](https://flic.kr/p/zJN4hz) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr

[![https://farm6.staticflickr.com/5637/22107733816_c3087d01d3_b.jpg](https://farm6.staticflickr.com/5637/22107733816_c3087d01d3_b.jpg)](https://flic.kr/p/zFzV3q)[image](https://flic.kr/p/zFzV3q) by [Norbert Ogiba](https://www.flickr.com/photos/nogiba/), on Flickr

i wet down the concrete and put some plastic sheeting over it to prevent drying too quickly. while it dries over the next few weeks i’ll be assembling the hydraulic stuff and doing a dry run off to the side.

---

<div class="post-metadata">

**Author:** ![GV1390](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gv1390/32/5432_2.png) [@GV1390](https://forums.speedlife.net/u/GV1390)\
**Post date:** [October 13, 2015, 10:44am UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/95 "2015-10-13T10:44:23Z")

</div>

Looks good Norb!

Of course FourEyed knows a guy who does concrete. [#beepityboopity](http://www.nyspeed.com/usertag.php?do=list&action=hash&hash=beepityboopity)

---

<div class="post-metadata">

**Author:** ![LZ1](https://avatars.discourse-cdn.com/v4/letter/l/7ab992/32.png) [@LZ1](https://forums.speedlife.net/u/LZ1)\
**Post date:** [October 13, 2015, 11:57am UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/96 "2015-10-13T11:57:18Z")

</div>

The pictures of your z06 are not loading I just see concrete wtf?

---

<div class="post-metadata">

**Author:** ![2TurboZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/2turboz/32/7577_2.png) [@2TurboZ](https://forums.speedlife.net/u/2TurboZ)\
**Post date:** [October 13, 2015, 12:15pm UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/97 "2015-10-13T12:15:53Z")

</div>

:tup:

---

<div class="post-metadata">

**Author:** ![1QIKZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1qikz/32/6112_2.png) [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)\
**Post date:** [October 13, 2015, 12:32pm UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/98 "2015-10-13T12:32:57Z")

</div>

> [@GV1390](#):
>
> Looks good Norb!
> 
> Of course FourEyed knows a guy who does concrete. [#beepityboopity](http://www.nyspeed.com/usertag.php?do=list&action=hash&hash=beepityboopity)

Same guy who did mine I think.

---

<div class="post-metadata">

**Author:** ![Shifty](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shifty/32/4959_2.png) [@Shifty](https://forums.speedlife.net/u/Shifty)\
**Post date:** [October 13, 2015, 12:33pm UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/99 "2015-10-13T12:33:50Z")

</div>

> [@LZ](#):
>
> The pictures of your z06 are not loading I just see concrete wtf?

Maybe he’ll bring out on the 24th

---

<div class="post-metadata">

**Author:** ![Motocrossx23](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/motocrossx23/32/5120_2.png) [@Motocrossx23](https://forums.speedlife.net/u/Motocrossx23)\
**Post date:** [October 13, 2015, 12:55pm UTC](https://forums.speedlife.net/t/2-car-garage-build/234242/100 "2015-10-13T12:55:18Z")

</div>

When the Max Jax is not in use, is there a cover to put over those plates?

This is something I’d definitely like to get for my garage next year.

[Previous page](https://forums.speedlife.net/t/2-car-garage-build/234242.md?page=4)

[Next page](https://forums.speedlife.net/t/2-car-garage-build/234242.md?page=6)
