# 2000 Mustang AIX build-Watkins Glen track day 4/18-4/19-with vids

**URL:** <https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382>\
**Category:** Builds\
**Created:** [June 25, 2013, 8:56am UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382 "2013-06-25T08:56:34Z")\
**Posts on this page:** 20\
**Page:** 5

<div class="post-metadata">

**Author:** ![02NismoSpecV](https://avatars.discourse-cdn.com/v4/letter/0/74df32/32.png) [@02NismoSpecV](https://forums.speedlife.net/u/02NismoSpecV)\
**Post date:** [January 29, 2015, 10:33am UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/81 "2015-01-29T10:33:37Z")

</div>

rules state that you can modify or tub the wheels but an alternative structure must be in place in order to cover the wheel opening from inside the car. and im going to be making my front fenders out of the part i cut out of the rear quarters to widen the front 3" per side and still maintain a good looking bodyline  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34477&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34477&stc=1)

used an electric 3" cutoff wheel to make the cut- came out pretty good and followed my line precisely  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34478&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34478&stc=1)

then i bent up some .035" aluminum to take up the space i cut out. then slotted it to take car of the arc and used some split rivets to hold it all in place.  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34479&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34479&stc=1)

inside picture of the wheel arch cover  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34480&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34480&stc=1)

---

<div class="post-metadata">

**Author:** ![02NismoSpecV](https://avatars.discourse-cdn.com/v4/letter/0/74df32/32.png) [@02NismoSpecV](https://forums.speedlife.net/u/02NismoSpecV)\
**Post date:** [February 2, 2015, 10:49am UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/82 "2015-02-02T10:49:40Z")

</div>

got to work on the hood the last time it was nice out a few weeks ago and wanted to gut the underside of it to shed weight and make it easier for venting. didnt do a before/after weight comparison but i’d say its probably a good 40% lighter than it was. still kind of heavy though.

laid out where my cuts were going  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34496&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34496&stc=1)

finished. thought the under side would pop right out like my last one but apparently they used some crazy bond glue on Cervini’s hoods that blows to get off. so i had to cut it in multiple sections in order to pry it all out of there  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34497&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34497&stc=1)

then i got to work on flaring out the rear quarters tapering up from big to small as it went up the car. came out better than i had hoped and still looks good and will shield any air from catching the front of the tire. this begins with the side skirt flaring out from its normal position to 2.5" at its biggest part towards the rear of the door.

here is a good reference picture to how much they are pushed out as opposed to being flush with the stock panel  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34500&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34500&stc=1)

then i got fancy with some aluminum and made 2 separate pieces to fill the gap between the door sill and the side skirt and the space where the quarter is flared out  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34501&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34501&stc=1)

end result.  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34504&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34504&stc=1)

---

<div class="post-metadata">

**Author:** ![theblue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/theblue/32/5074_2.png) [@theblue](https://forums.speedlife.net/u/theblue)\
**Post date:** [February 2, 2015, 10:52am UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/83 "2015-02-02T10:52:56Z")

</div>

are you just going to leave the gap or how will you finish that transition behind the door?

---

<div class="post-metadata">

**Author:** ![02NismoSpecV](https://avatars.discourse-cdn.com/v4/letter/0/74df32/32.png) [@02NismoSpecV](https://forums.speedlife.net/u/02NismoSpecV)\
**Post date:** [February 2, 2015, 10:56am UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/84 "2015-02-02T10:56:05Z")

</div>

so all that body widening allowed me to use these to their full potential changing the rear track width from 72" to 78" 2.5" spacers per side plus the 15mm per side from different offset wheels. still have to order extended hardened studs for the spacers

- 
  - 
    - Updated - - -

> [@theblue](#):
>
> are you just going to leave the gap or how will you finish that transition behind the door?

did you miss the last 2 pics? lol. it shows the piece i made to cover the gap

---

<div class="post-metadata">

**Author:** ![theblue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/theblue/32/5074_2.png) [@theblue](https://forums.speedlife.net/u/theblue)\
**Post date:** [February 2, 2015, 11:02am UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/85 "2015-02-02T11:02:44Z")

</div>

oh, I see it now, that was hard to see because it’s all black.

---

<div class="post-metadata">

**Author:** ![POOPRA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/poopra/32/7188_2.png) [@POOPRA](https://forums.speedlife.net/u/POOPRA)\
**Post date:** [February 2, 2015, 11:15am UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/86 "2015-02-02T11:15:31Z")

</div>

Those are some serious spacers. Do they make studs that long off the shelf?

---

<div class="post-metadata">

**Author:** ![02NismoSpecV](https://avatars.discourse-cdn.com/v4/letter/0/74df32/32.png) [@02NismoSpecV](https://forums.speedlife.net/u/02NismoSpecV)\
**Post date:** [February 2, 2015, 11:37am UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/87 "2015-02-02T11:37:15Z")

</div>

> [@POOPRA](#):
>
> Those are some serious spacers. Do they make studs that long off the shelf?

they are normal length studs that are in there now. the hole they are pressed into is just recessed from the rear flange of the hub so it doesnt need a stud that is 4" long

---

<div class="post-metadata">

**Author:** ![SRS\_BZNS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/srs_bzns/32/6375_2.png) [@SRS\_BZNS](https://forums.speedlife.net/u/SRS_BZNS)\
**Post date:** [February 4, 2015, 1:13pm UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/88 "2015-02-04T13:13:01Z")

</div>

Giant spacers on a track car is scary to me.

---

<div class="post-metadata">

**Author:** ![XwalkerX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xwalkerx/32/7598_2.png) [@XwalkerX](https://forums.speedlife.net/u/XwalkerX)\
**Post date:** [February 4, 2015, 1:18pm UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/89 "2015-02-04T13:18:51Z")

</div>

> [@SRS BZNS](#):
>
> Giant spacers on any car is scary to me.

fixed.

---

<div class="post-metadata">

**Author:** ![maxwell](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/maxwell/32/6524_2.png) [@maxwell](https://forums.speedlife.net/u/maxwell)\
**Post date:** [February 4, 2015, 1:41pm UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/90 "2015-02-04T13:41:51Z")

</div>

Damn dude dats alotta spacer. Why?

---

<div class="post-metadata">

**Author:** ![02NismoSpecV](https://avatars.discourse-cdn.com/v4/letter/0/74df32/32.png) [@02NismoSpecV](https://forums.speedlife.net/u/02NismoSpecV)\
**Post date:** [February 5, 2015, 4:48am UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/91 "2015-02-05T04:48:59Z")

</div>

> [@SRS BZNS](#):
>
> Giant spacers on a track car is scary to me.

> [@XwalkerX](#):
>
> fixed.

most guys that run mustangs in NASA run some type of spacer. front and back. and they are bolt on spacers that bolt to the hub. then the wheel bolts to the spacer. The Roush has had 1" rear spacers for the past 6 years. and anytime i tracked it i ran 1.5" rear spacers and 1" front spacers with no problems.

they are a much better alternative to a generic slide on spacer that would require extended studs

- 
  - 
    - Updated - - -

> [@maxwell](#):
>
> Damn dude dats alotta spacer. Why?

more track width. if i did nothing i would be 8" shy of the rule for max width so why not take advantage of it?

---

<div class="post-metadata">

**Author:** ![SRS\_BZNS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/srs_bzns/32/6375_2.png) [@SRS\_BZNS](https://forums.speedlife.net/u/SRS_BZNS)\
**Post date:** [February 5, 2015, 10:26am UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/92 "2015-02-05T10:26:17Z")

</div>

I wasn’t really concerned with stud threads and so on as much as the pressures put on the wheel bearings and a bit on the suspension when spacers like that are used.

I used to run big spacers back in the day and went through a set of wheel bearings every 4000 miles. Wheel bearings go unnoticed in stripped out race cars because there is so much else to drown out the noise. Its not fun when they fail completely lol

---

<div class="post-metadata">

**Author:** ![02NismoSpecV](https://avatars.discourse-cdn.com/v4/letter/0/74df32/32.png) [@02NismoSpecV](https://forums.speedlife.net/u/02NismoSpecV)\
**Post date:** [February 5, 2015, 12:29pm UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/93 "2015-02-05T12:29:58Z")

</div>

> [@SRS BZNS](#):
>
> I wasn’t really concerned with stud threads and so on as much as the pressures put on the wheel bearings and a bit on the suspension when spacers like that are used.
> 
> I used to run big spacers back in the day and went through a set of wheel bearings every 4000 miles. Wheel bearings go unnoticed in stripped out race cars because there is so much else to drown out the noise. Its not fun when they fail completely lol

im not too worried since the car will probably only see less than 1000 hard miles of just track use per year so rebuilding/replacing wheel bearings every year is no big deal

---

<div class="post-metadata">

**Author:** ![MPD47](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mpd47/32/7383_2.png) [@MPD47](https://forums.speedlife.net/u/MPD47)\
**Post date:** [February 5, 2015, 6:16pm UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/94 "2015-02-05T18:16:26Z")

</div>

> [@SRS BZNS](#):
>
> I wasn’t really concerned with stud threads and so on as much as the pressures put on the wheel bearings and a bit on the suspension when spacers like that are used.
> 
> I used to run big spacers back in the day and went through a set of wheel bearings every 4000 miles. Wheel bearings go unnoticed in stripped out race cars because there is so much else to drown out the noise. Its not fun when they fail completely lol

Who doesn’t check wheel bearings every outing in a race car?

---

<div class="post-metadata">

**Author:** ![02NismoSpecV](https://avatars.discourse-cdn.com/v4/letter/0/74df32/32.png) [@02NismoSpecV](https://forums.speedlife.net/u/02NismoSpecV)\
**Post date:** [February 6, 2015, 6:40am UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/95 "2015-02-06T06:40:57Z")

</div>

made a support bar to extend the dash out to a reachable distance and to provide solid mounting for switches etc  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34586&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34586&stc=1)

and i have access at work to use the brake over at the machine shop but its a pain in the ass to drive there and take shit with me and hope i measured right and drive back and test fit yadda yadda.  
so ive been on the look out for about a year for my own 8ft brake basically just for the convenience of having it right there to use at any time. picked this up back in August from a guy down state. bent up to 3/16 steel that was about 9" wide and thats probably about the max type thing i can do with it  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34585&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34585&stc=1)

and i bought a bead roller also just to have for the convenience of it but had to make some kind of stand for it with i was originally gonna make out of some scrap 2" piping from work but instead of doing that i figured id make a removable piece and use my engine stand since i dont use it too often anyway

fabbed something up out of 2" pipe and some 2" angle and some plate. works perfect for what i need it for and removes with one bolt.  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34531&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34531&stc=1)

---

<div class="post-metadata">

**Author:** ![02NismoSpecV](https://avatars.discourse-cdn.com/v4/letter/0/74df32/32.png) [@02NismoSpecV](https://forums.speedlife.net/u/02NismoSpecV)\
**Post date:** [February 12, 2015, 8:59am UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/96 "2015-02-12T08:59:29Z")

</div>

used some .040 aluminum for the dash. nothing crazy, just wanted it to look good and fill in the space between the steering wheel and windshield  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34587&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34587&stc=1)

laid out where i wanted my gauges and tach. and cut some holes. going to run the following  
water temp  
water pressure  
oil temp  
oil pressure  
fuel pressure  
volts  
tach

and i have the possibility to add more if i want  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34588&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34588&stc=1)

laid down some bead roles  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34589&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34589&stc=1)

- 
  - 
    - Updated - - -

here’s a copy of my pedal setup. the steering shaft kinda fucked me on where i really wanted them but it worked out ok.  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34590&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34590&stc=1)

- 
  - 
    - Updated - - -

rules require a rear firewall separating the fuel fill and open ground etc so i opted to make a rear firewall starting behind the main hoop and extend all the way back rather than just doing a 2 piece part to suffice the rules. i think the way i did it is a cleaner look anyway

made the 2 top pieces. quite the obstacle to get them in there but its a nice tight fit and looks good. unfortunately cant bead roll it because it has a pretty good arch to it while putting it in. but its .050" thick so its not going to bend easy anyway. both pieces are joined in the middle with a bar going across welded to the cage for support. all the panels are dzus’d in as well so they can be easily removed  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34593&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34593&stc=1)

- 
  - 
    - Updated - - -

view from the front angle  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34594&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34594&stc=1)

after all the dzus springs and fasteners were installed  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34595&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34595&stc=1)

made the front piece which dzus’s into the piece above it. had to use nutserts on the bottom for lack of space to get inside to install the springs.  
 ![http://www.nyspeed.com/attachment.php?attachmentid=34596&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=34596&stc=1)

i love seeing the end result of sheet metal work because it is so aesthetically pleasing. to me anyway lol

---

<div class="post-metadata">

**Author:** ![02NismoSpecV](https://avatars.discourse-cdn.com/v4/letter/0/74df32/32.png) [@02NismoSpecV](https://forums.speedlife.net/u/02NismoSpecV)\
**Post date:** [August 27, 2015, 10:16am UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/97 "2015-08-27T10:16:18Z")

</div>

have a ton of shit to update still in terms of the build. but the car runs and drives and makes plenty of jam on the dyno

dyno pulls from last night. ended up making 413rwhp/426rwtq. super happy with the power it makes.

![http://www.nyspeed.com/attachment.php?attachmentid=35479&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=35479&stc=1)  
final pull  
[https://www.youtube.com/watch?v=wXAtkq-Xvt8&feature=youtu.be](https://www.youtube.com/watch?v=wXAtkq-Xvt8&feature=youtu.be)

first pull with the big fireball on decel

and it shoots some good flames

![http://www.nyspeed.com/attachment.php?attachmentid=35478&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=35478&stc=1)

![http://www.nyspeed.com/attachment.php?attachmentid=35477&stc=1](http://www.nyspeed.com/attachment.php?attachmentid=35477&stc=1)

---

<div class="post-metadata">

**Author:** ![Norb\_O](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/norb_o/32/5189_2.png) [@Norb\_O](https://forums.speedlife.net/u/Norb_O)\
**Post date:** [August 27, 2015, 10:23am UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/98 "2015-08-27T10:23:43Z")

</div>

:tup: fire

---

<div class="post-metadata">

**Author:** ![cougarspeed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/cougarspeed/32/7468_2.png) [@cougarspeed](https://forums.speedlife.net/u/cougarspeed)\
**Post date:** [August 27, 2015, 10:24am UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/99 "2015-08-27T10:24:24Z")

</div>

Party time!

Burnouts or it didn’t happen

---

<div class="post-metadata">

**Author:** ![02NismoSpecV](https://avatars.discourse-cdn.com/v4/letter/0/74df32/32.png) [@02NismoSpecV](https://forums.speedlife.net/u/02NismoSpecV)\
**Post date:** [August 27, 2015, 10:26am UTC](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382/100 "2015-08-27T10:26:43Z")

</div>

> [@cougarspeed](#):
>
> Party time!
> 
> Burnouts or it didn’t happen

it was 9pm by the time we unhooked it from the dyno. otherwise that wouldve probably happened lol

[Previous page](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382.md?page=4)

[Next page](https://forums.speedlife.net/t/2000-mustang-aix-build-watkins-glen-track-day-4-18-4-19-with-vids/231382.md?page=6)
