# 2006 Subaru Legacy GT Limited **URL:** \ **Category:** Classifieds\ **Created:** [February 25, 2011, 3:01pm UTC](https://forums.speedlife.net/t/2006-subaru-legacy-gt-limited/209529 "2011-02-25T15:01:19Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![upstateclipse](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/upstateclipse/32/7348_2.png) [@upstateclipse](https://forums.speedlife.net/u/upstateclipse)\ **Post date:** [February 25, 2011, 3:01pm UTC](https://forums.speedlife.net/t/2006-subaru-legacy-gt-limited/209529/1 "2011-02-25T15:01:19Z")
As of right now this is more of a feeler/interest thread to see if I can sell it as is or should part it out and sell it stock. I just bought this car and had it shipped from Louisiana. I bought it with a spun bearing and have since fixed everything. It has yet to touch a road in New York and the under body is absolutely spotless. It had a dent in the driver door and a few scratches on the exterior so I just trailered it over to a local body shop to have it fixed(the door is being replaced not filled if the dent can’t be popped out). I expect to have it done by Tuesday so I will be able to get a lot of pics at that point if there is any serious interest. I am looking to get 14k/Best offer Details: Year: 2006 Make: Subaru Model: Legacy Trim: GT/Limited Motor:2.5 turbo Trans: 5 speed manual Mileage: 78,xxx Exterior: Silver Interior: Black Leather Options/Amenities: 6 disk in dash cd player, under seat sub woofer, power locks/windows/moon roof, heated leather, Xm radio Maintenance/Modifications: Wiseco pistons Manley connecting rods New oem crankshaft Acl race main/rod bearings New oem oil pump/water pump/timing belt/timing components/head gaskets/oil pick up/oem seal & gasket kit Act HD clutch/flywheel Deadbolt TD-06 18g turbo Avo inlet Spt intake Perrin tmic Gfb bov maddad/gt spec Uel manifold/up pipe combo 2 piece catted down pipe Borla catback Agency Power 816cc injectors/Fuel rail setup Aeromotive Afpr Walbro 255 fuel pump Cobb Accessport V2 Sti strut bar Spt f/r sway bars Hawk Hp pads Re-11 Tires in very good condition. I am sure there is more that I can not remember off of the top of my head. It currently has a tune from infamous that I tweaked a little. It previously made 274/301 on this setup with a stock bottom end. I will more than likely bring it to innovative to have mike give it a new tune before it is sold. If you have any questions let me know and I will get back to you asap. I know that pictures sell cars and they will be posted as soon as I get the car back. ---
**Author:** ![TradersBASE](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tradersbase/32/5321_2.png) [@TradersBASE](https://forums.speedlife.net/u/TradersBASE)\ **Post date:** [February 25, 2011, 3:25pm UTC](https://forums.speedlife.net/t/2006-subaru-legacy-gt-limited/209529/2 "2011-02-25T15:25:57Z")
In for pics…this is probably what I am looking for. ---
**Author:** ![91MR2](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91mr2/32/7217_2.png) [@91MR2](https://forums.speedlife.net/u/91MR2)\ **Post date:** [February 25, 2011, 4:20pm UTC](https://forums.speedlife.net/t/2006-subaru-legacy-gt-limited/209529/3 "2011-02-25T16:20:51Z")
These cars are nice. ---
**Author:** ![Carnut](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/carnut/32/7590_2.png) [@Carnut](https://forums.speedlife.net/u/Carnut)\ **Post date:** [February 25, 2011, 6:00pm UTC](https://forums.speedlife.net/t/2006-subaru-legacy-gt-limited/209529/4 "2011-02-25T18:00:17Z")
Who built the engine? ---
**Author:** ![upstateclipse](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/upstateclipse/32/7348_2.png) [@upstateclipse](https://forums.speedlife.net/u/upstateclipse)\ **Post date:** [February 25, 2011, 7:12pm UTC](https://forums.speedlife.net/t/2006-subaru-legacy-gt-limited/209529/5 "2011-02-25T19:12:03Z")
The short block was checked/prepped(hone angle, clearances, etc) at Fingerlakes Machine. I also had him check and clean the heads but no machining was necessary with them. I did final assembly at my shop. Like you I am an ASE master tech and I worked at a Subaru dealership for a while so I am pretty confident in my abilities which is probably a good thing since I get paid to do this. Anyone interested is encouraged to have someone such as Don or Innovative do a prepurchase inspection on the car. ---
**Author:** ![livin4hockey](https://avatars.discourse-cdn.com/v4/letter/l/d2c977/32.png) [@livin4hockey](https://forums.speedlife.net/u/livin4hockey)\ **Post date:** [February 27, 2011, 9:50am UTC](https://forums.speedlife.net/t/2006-subaru-legacy-gt-limited/209529/6 "2011-02-27T09:50:29Z")
Top notch seller here, the man does good work! ---
**Author:** ![upstateclipse](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/upstateclipse/32/7348_2.png) [@upstateclipse](https://forums.speedlife.net/u/upstateclipse)\ **Post date:** [March 10, 2011, 2:22pm UTC](https://forums.speedlife.net/t/2006-subaru-legacy-gt-limited/209529/7 "2011-03-10T14:22:16Z")
Thanks for the vouch Mike. Sorry about not getting pics but this is no longer for sale. I have been driving it and like it much more than my evo so that will probably be for sale soon. ---
**Author:** ![Subester](https://avatars.discourse-cdn.com/v4/letter/s/8edcca/32.png) [@Subester](https://forums.speedlife.net/u/Subester)\ **Post date:** [April 12, 2011, 10:02am UTC](https://forums.speedlife.net/t/2006-subaru-legacy-gt-limited/209529/8 "2011-04-12T10:02:02Z")
Curious if this is the same Deadbolt TD06/18 you were selling [_ **here** _](http://legacygt.com/forums/showthread.php/fs-ny-perrin-tmic-deadbolt-tdo6-18g-ap-v2-gfb-157353.html?t=157353) or another. Or whether [_ **these** _](http://legacygt.com/forums/showthread.php/fs-lots-stock-engine-parts-grill-lh-headlight-158166.html?)are the heads you used for your rebuild. Can vouch for the Legacy - great cars.