# 2007 Roll Call **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [March 6, 2007, 10:11am UTC](https://forums.speedlife.net/t/2007-roll-call/25506 "2007-03-06T10:11:33Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\ **Post date:** [March 6, 2007, 10:48am UTC](https://forums.speedlife.net/t/2007-roll-call/25506/21 "2007-03-06T10:48:48Z")
1. new entanks and stainless IC piping with crosshairs before the maf to put an end to my turbulence=inaccurate readings for tuning. 2. 87fox’s stock cobra maf into a new maf housing because my car was maxing the stock maf last season. this maf will support more power than i will ever make lol. 3. MBC and im going to run 12psi on stock internals, then later maybe 15psi with aquamist or equivalent.(shooting to break 300whp on stock internals this year) 4. drive, drive, drive. should be a fun season for once. ---
**Author:** ![somedude](https://avatars.discourse-cdn.com/v4/letter/s/ecd19e/32.png) [@somedude](https://forums.speedlife.net/u/somedude)\ **Post date:** [March 6, 2007, 10:50am UTC](https://forums.speedlife.net/t/2007-roll-call/25506/22 "2007-03-06T10:50:50Z")
you could make 300whp on 15psi? wow I under estamate the 2.3 tech ---
**Author:** ![focusinprogress](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/focusinprogress/32/7227_2.png) [@focusinprogress](https://forums.speedlife.net/u/focusinprogress)\ **Post date:** [March 6, 2007, 10:52am UTC](https://forums.speedlife.net/t/2007-roll-call/25506/23 "2007-03-06T10:52:35Z")
its a 2.0 zetec, and yes. i forgot to mention i have a full P&P head casing that just needs valvetrain and turbo cams which i might do, and i have a ported early2000 one peice intake mani going on as well. ---
**Author:** ![Mike93](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mike93/32/7325_2.png) [@Mike93](https://forums.speedlife.net/u/Mike93)\ **Post date:** [March 6, 2007, 10:52am UTC](https://forums.speedlife.net/t/2007-roll-call/25506/24 "2007-03-06T10:52:47Z")
Mustang: haven’t touched it yet, but before I bring it out of storage: Widen rear wheels to 10.5"s, run a 315 street radial Switch to 3.27’s, rebuild diff, replace twisted axle Rebuild T5 Tighten up loose bolts Continue prepping the car for a single turbo. These are the realistic mods…if I were’nt so gun-ho on building a deck, landscaping, redoing a kitchen and bathroom at my house the turbo kit would be getting installed now. SHO: I’d like to sell it if I could…but there are a few issues with it that may hinder a sale:( So the only mods would be those that fix the problems I have with the car right now. ---
**Author:** ![TrueBlue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/trueblue/32/7245_2.png) [@TrueBlue](https://forums.speedlife.net/u/TrueBlue)\ **Post date:** [March 6, 2007, 10:54am UTC](https://forums.speedlife.net/t/2007-roll-call/25506/25 "2007-03-06T10:54:01Z")
Last year, non-running SHO, this year, vintage Mustang fastback in pieces. 😛 ---
**Author:** ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)\ **Post date:** [March 6, 2007, 10:56am UTC](https://forums.speedlife.net/t/2007-roll-call/25506/26 "2007-03-06T10:56:29Z")
[quote=“LXTASY,post:24,topic:25506"”] turbo kit [/quote] oooooo coool. do you have a certain kit in mind or are you planning on building one? what size turbo(s) ---
**Author:** ![Daddie](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/daddie/32/7621_2.png) [@Daddie](https://forums.speedlife.net/u/Daddie)\ **Post date:** [March 6, 2007, 10:58am UTC](https://forums.speedlife.net/t/2007-roll-call/25506/27 "2007-03-06T10:58:30Z")
Galant - A motor that doesn’t have a compression test result of : 120 - 117 - 102 :bloated: - 115 Something more along lines of 190-190-190-190 And likes to rev like my Honda, to 9K with big ass exhaust ports. Oh yeah, 3 bolt non lsd =\> 4 bolt LSD new rear suspension to fix camber issues. Sweet momo steering wheel. Rollin’ on 17"s soooon * * * S2000 - get inspected. /fin ---
**Author:** ![greenbull](https://avatars.discourse-cdn.com/v4/letter/g/bc8723/32.png) [@greenbull](https://forums.speedlife.net/u/greenbull)\ **Post date:** [March 6, 2007, 10:59am UTC](https://forums.speedlife.net/t/2007-roll-call/25506/28 "2007-03-06T10:59:53Z")
smaller pulley bigger injectors tune enjoy life ---
**Author:** ![DrDoS](https://avatars.discourse-cdn.com/v4/letter/d/ccd318/32.png) [@DrDoS](https://forums.speedlife.net/u/DrDoS)\ **Post date:** [March 6, 2007, 11:01am UTC](https://forums.speedlife.net/t/2007-roll-call/25506/29 "2007-03-06T11:01:39Z")
i have a car? ---
**Author:** ![somedude](https://avatars.discourse-cdn.com/v4/letter/s/ecd19e/32.png) [@somedude](https://forums.speedlife.net/u/somedude)\ **Post date:** [March 6, 2007, 11:11am UTC](https://forums.speedlife.net/t/2007-roll-call/25506/30 "2007-03-06T11:11:36Z")
> [@drdos](#): > > ``` > i have a car? > > ``` [quote=“turbo ls1 ss”"] Sneaky is gay… post up what you’re coming out with this year, and what changes you made from last year bitches… [/quote] . ---
**Author:** ![POOPRA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/poopra/32/7188_2.png) [@POOPRA](https://forums.speedlife.net/u/POOPRA)\ **Post date:** [March 6, 2007, 11:15am UTC](https://forums.speedlife.net/t/2007-roll-call/25506/31 "2007-03-06T11:15:36Z")
Well I have several things on the back burner, depends on what I want to spend money on Fix rear main seal leak Get a new driveshaft Get a TRD Rear End Get skinnies and Slicks Fab a new catback Fab a new intake Full Repaint ---
**Author:** ![psphinx81](https://avatars.discourse-cdn.com/v4/letter/p/e9a140/32.png) [@psphinx81](https://forums.speedlife.net/u/psphinx81)\ **Post date:** [March 6, 2007, 11:17am UTC](https://forums.speedlife.net/t/2007-roll-call/25506/32 "2007-03-06T11:17:52Z")
new clutch 680cc injectors turboXS FMIC hks 272’s upper and lower IC piping tuned… again ---
**Author:** ![BadnewsMike](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/badnewsmike/32/7419_2.png) [@BadnewsMike](https://forums.speedlife.net/u/BadnewsMike)\ **Post date:** [March 6, 2007, 11:25am UTC](https://forums.speedlife.net/t/2007-roll-call/25506/33 "2007-03-06T11:25:59Z")
[quote=“psphinx81,post:32,topic:25506"”] upper and lower IC piping tuned… again [/quote] :word: I keep blowing a seal on an intake pipe where a rubber/mesh pipe meets a metel tube. but otherwise same as last year. ---
**Author:** ![choko](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/choko/32/7240_2.png) [@choko](https://forums.speedlife.net/u/choko)\ **Post date:** [March 6, 2007, 11:33am UTC](https://forums.speedlife.net/t/2007-roll-call/25506/34 "2007-03-06T11:33:19Z")
Turbo Cavy \< Roll Car for all the lame roll racers who cant hook at a dig. N20 Sunflower \< Dig Car V8 Ranger \< Cruisen / shows etc. ---
**Author:** ![Mike93](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mike93/32/7325_2.png) [@Mike93](https://forums.speedlife.net/u/Mike93)\ **Post date:** [March 6, 2007, 11:53am UTC](https://forums.speedlife.net/t/2007-roll-call/25506/35 "2007-03-06T11:53:04Z")
[quote=“turbo ls1 ss,post:26,topic:25506"”] oooooo coool. do you have a certain kit in mind or are you planning on building one? what size turbo(s) [/quote] The kit I’m looking into is fairly new to Mustangs and has been getting good reviews, check it out [here](http://www.quicktimeturbosystems.com/info.html). I’m very, very tempted to throw it on the credit card but like I said in an earlier post I have some other projects I want to tend to. Worst part about it is my car has been more or less ready for boost for the past 5 years or so (minus a few parts here and there)…running around on low compression is killing me knowing how much this car would wake up with a turbo:( ---
**Author:** ![Z\_PHAT\_Z](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/z_phat_z/32/7293_2.png) [@Z\_PHAT\_Z](https://forums.speedlife.net/u/Z_PHAT_Z)\ **Post date:** [March 6, 2007, 1:03pm UTC](https://forums.speedlife.net/t/2007-roll-call/25506/36 "2007-03-06T13:03:35Z")
Arias Extreme Duty pistons .20 overbore Pauter rods Darton MID sleeve ARP main bolts ARP L19 head studs Rear cylinder coolant bypass mod OZ1’s head strengthening mod Ported and polished heads 5 angle valve job Tomei 268 cams HKS Metal Head Gaskets JWT HD Valve Springs CJM Stage 2 fuel system ATS triple carbon clutch UTEC RC 1000cc injectors ---
**Author:** ![13005TEDGP](https://avatars.discourse-cdn.com/v4/letter/1/edb3f5/32.png) [@13005TEDGP](https://forums.speedlife.net/u/13005TEDGP)\ **Post date:** [March 6, 2007, 1:23pm UTC](https://forums.speedlife.net/t/2007-roll-call/25506/37 "2007-03-06T13:23:55Z")
Tires, a actual dyno tune…aaand hopefully now that all problems were addressed. I can make it through a summer w/o insident. ---
**Author:** ![2TurboZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/2turboz/32/7577_2.png) [@2TurboZ](https://forums.speedlife.net/u/2TurboZ)\ **Post date:** [March 6, 2007, 1:33pm UTC](https://forums.speedlife.net/t/2007-roll-call/25506/38 "2007-03-06T13:33:04Z")
Haven’t decided yet…but if I get called out…I can make a phone call and borrow a car for a little bit 🙂 ---
**Author:** ![Viper966](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/viper966/32/7268_2.png) [@Viper966](https://forums.speedlife.net/u/Viper966)\ **Post date:** [March 6, 2007, 1:37pm UTC](https://forums.speedlife.net/t/2007-roll-call/25506/39 "2007-03-06T13:37:38Z")
leaving the car the way i bought it for now ---
**Author:** ![MPD47](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mpd47/32/7383_2.png) [@MPD47](https://forums.speedlife.net/u/MPD47)\ **Post date:** [March 6, 2007, 1:42pm UTC](https://forums.speedlife.net/t/2007-roll-call/25506/40 "2007-03-06T13:42:01Z")
Sub 2500lbs Just shy of 200whp A ton more track time. And prepping the new turbo engine. [Previous page](https://forums.speedlife.net/t/2007-roll-call/25506.md?page=1) [Next page](https://forums.speedlife.net/t/2007-roll-call/25506.md?page=3)