# 2011 Subaru STI Sedan Modified 39k KMS

**URL:** <https://forums.speedlife.net/t/2011-subaru-sti-sedan-modified-39k-kms/271387>\
**Category:** Classifieds\
**Created:** [January 3, 2015, 12:51pm UTC](https://forums.speedlife.net/t/2011-subaru-sti-sedan-modified-39k-kms/271387 "2015-01-03T12:51:36Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tacoboy](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@Tacoboy](https://forums.speedlife.net/u/Tacoboy)\
**Post date:** [January 3, 2015, 12:51pm UTC](https://forums.speedlife.net/t/2011-subaru-sti-sedan-modified-39k-kms/271387/1 "2015-01-03T12:51:36Z")

</div>

NO PMs, please email [tim.felsky@gmail.com](mailto:tim.felsky@gmail.com) or call/text 519-777-9241  
As you will see, not a corner was cut in the build of this car. All parts used are of the utmost quality. Driving this car daily has been nothing short of a pleasure. If you’ve never driven a car with a full bushing job, KW V3 coilovers and a carbon driveshaft… it’s simply a treat.  
Krowned and Driven for 1/2 a winter in 2011. Winter garage stored ever since. Krowned this year with the hopes to winter drive, but must sell.  
Mods are as follows;

- CP Pistons (Stock bore)
- Brian Crower Arp2000 Rods
- EJ257 Master Gasket Kit
- Grimmspeed 3mm Phenolic Spacers
- ARP Head Studs
- ACL Race bearings - 5M8309H-STD (#5 Thrust), 4B8296H-STD [Rod bearing]
- Mishimoto Magnetic Oil Plug
- Gates Racing Timing Belt
- Ks-tech Air Pump Delete
- Tomei 08+ Dual-AVCS STI Pon Cams (260-9.8mm IN, 256-10.8mm EX)
- Killer B Ultimate Oil Pick Up
- Killer B Oil Baffle/Windage Tray
- FiveO 1000CC Injectors
- KS-Tech TGV Delete Kit
- Grimspeed Enlarged Intake Manifold gaskets (Manifold -\> TGV)
- PnP Heads (+Valve job/valve seat enlargement), PnP Intake Manifold, PnP Throttle body
- NGK 1 Step Colder Spark Plugs
- Turbosmart Fuel Pressure Regulator
- Turbosmart 08 STI FPR Adaptor
- Turbosmart FPR Gauge
- Crawford Air oil separator
- DW65C Fuel Pump – Infamous Performance Bracket
- Subaru Block Heater
- Mishimoto X-Line Radiator (1.3 Bar Radiator Cap, Magnetic drain plug)
- Oil pan heater pad
- Mishimoto Red Silicone Radiator hoses
- Perrin oil cooler kit
- Perrin turbo blanket  
Exhaust
- UR 3-Bolt EWG Up-Pipe w/ TiAL MV-S 38mm WasteGate (Water Cooled)
- Tomei EL Header
- Invidia Q300 Quad/Ti Tip Catback Exhaust
- Kartboy Exhaust Hangers (x5)
- Ultimate Racing Downpipe - Catless
- Stainless Vband Test pipe
- Catted Vband Pipe (quickly switch)  
Induction/ECU/Turbo/IC
- AMR Turbo Inlet
- AMR 76mm CAI
- Custom cold air box by Sameer @ Re-Speed
- COBB Accessport
- Blouch Dominator 3 Turbo (GT3076R)
- AMR FMIC
- Hood scoop block off included (not currently installed)
- Forge BPV
- OMNI 4-Bar MAP sensor
- Grimmspeed 3-Port Electronic Boost Control Solenoid for STI Brakes
- Stoptech Brake Lines
- GrimmSpeed Master Cylinder Brace (Brake)
- Hawk HP+ Brake Pads, Stoptech Street Pads
- Motul RBF600 Brake Fluid  
Drivetrain/Suspension
- Group-N Engine Mounts
- Group-N Transmission Mount (11 STi)
- Torque Solution V3 Billet Pitchstop Engine Mount
- Kartboy Short shifter
- Kartboy Front shifter bushing
- Kartboy Rear shifter stay bushing
- TIC Shift Linkage Bushings – TIC-SLB-06-SUB
- TIC Pivot Bushings - TIC PIVOT-6MT
- Whiteline Positive shift kit
- Whiteline Differential Bushing
- Whiteline Rear diff inserts
- Perrin Subframe Lockdown
- Eibach F/R Sway Bars
- Whiteline Front Alloy Lock Rings
- Kartboy Rear Sway Bar End Links
- Whiteline Steering Rack Bushings
- Cusco Power Steering Rack Brace
- ACT XTSS Clutch
- Agency Power Clutch Line
- DSS Carbon fiber driveshaft
- KW V3 Coilovers
- Whiteline Front Roll-centre/bump-steer kit
- Whiteline Camber bolts
- Whiteline Front lower control arm ‘H-Brace’
- Whiteline Rear Swaybar mount support
- Tanabe Front Strut Tower Bar  
Exterior
- Perrin Shorty Antenna
- LED Tail lights
- Bulbs
- 6000k Xenon, 6000k Fog, Yellow DRL, Smoked Front Signal, Reverse 6000k, Licence Plate 6000k,
- Smoked Rear Signal
- Tint
- XXR527 18x8.75" +38 wheels.
- OEM 18’s with Blizzak snows.
- Weathertech front floor liners  
Interior
- Prova SI-Drive Knob
- Alcantara Shifter and eBrake boot
- SMY Clustermaker Gauge Pod
- Prosport Boost Gauge
- Prosport Oil Pressure Gauge
- AEM UEGO Air/Fuel guage/sender.
- Prosport Remote oil sender kit (For oil pressure gauge)
- Homelink/Auto-Dimming Compass Mirror
- Perrin stainless steel shift knob  
Engine has a fresh rebuild with 3000kms. Fully broken in. Tuned by Mike @ Innovative Tuning in Buffalo NY. Test pipe tune made392/371awhp @21psi on a Mustang Dyno. Other tunes for daily catted driving, as well as street/track test pipe included

$35900 OBO.  
[ATTACH=CONFIG]34257[/ATTACH][ATTACH=CONFIG]34258[/ATTACH][ATTACH=CONFIG]34259[/ATTACH]

---

<div class="post-metadata">

**Author:** ![RustyS13](https://avatars.discourse-cdn.com/v4/letter/r/b38774/32.png) [@RustyS13](https://forums.speedlife.net/u/RustyS13)\
**Post date:** [January 10, 2015, 6:54am UTC](https://forums.speedlife.net/t/2011-subaru-sti-sedan-modified-39k-kms/271387/2 "2015-01-10T06:54:24Z")

</div>

to anyone looking at buying a subbie this is a good deal and will save you a lot of time and money. The stock pistons are complete garbage on these engines so a rebuild is definitely necessary (our 2011 wrx engine needs a full rebuild at only 42,000km!) And the labor to build a subaru motor is definitely not cheap! glws

---

<div class="post-metadata">

**Author:** ![Tacoboy](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@Tacoboy](https://forums.speedlife.net/u/Tacoboy)\
**Post date:** [February 10, 2015, 12:31am UTC](https://forums.speedlife.net/t/2011-subaru-sti-sedan-modified-39k-kms/271387/3 "2015-02-10T00:31:54Z")

</div>

bump, need gone. willing to work on price

---

<div class="post-metadata">

**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\
**Post date:** [February 12, 2015, 6:14pm UTC](https://forums.speedlife.net/t/2011-subaru-sti-sedan-modified-39k-kms/271387/4 "2015-02-12T18:14:59Z")

</div>

this converts to well under $30k USD too

---

<div class="post-metadata">

**Author:** ![Tacoboy](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@Tacoboy](https://forums.speedlife.net/u/Tacoboy)\
**Post date:** [March 25, 2015, 6:42pm UTC](https://forums.speedlife.net/t/2011-subaru-sti-sedan-modified-39k-kms/271387/5 "2015-03-25T18:42:33Z")

</div>

Thanks Bing.

Yes. I will let it go for 27000USD.

See updated add for more pics.

> **[Kijiji - Buy, Sell & Save with Canada's #1 Local Classifieds](https://www.kijiji.ca/k-set-location.html)**
>
> Visit Kijiji Classifieds to buy, sell, or trade almost anything! New and used items, cars, real estate, jobs, services, vacation rentals and more virtually anywhere.

---

<div class="post-metadata">

**Author:** ![Tacoboy](https://avatars.discourse-cdn.com/v4/letter/t/2acd7d/32.png) [@Tacoboy](https://forums.speedlife.net/u/Tacoboy)\
**Post date:** [April 10, 2015, 9:21am UTC](https://forums.speedlife.net/t/2011-subaru-sti-sedan-modified-39k-kms/271387/6 "2015-04-10T09:21:47Z")

</div>

sold
