# 240sx question **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [July 23, 2007, 1:25pm UTC](https://forums.speedlife.net/t/240sx-question/191334 "2007-07-23T13:25:56Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![imported\_steve](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_steve/32/6050_2.png) [@imported\_steve](https://forums.speedlife.net/u/imported_steve)\ **Post date:** [July 23, 2007, 1:25pm UTC](https://forums.speedlife.net/t/240sx-question/191334/1 "2007-07-23T13:25:56Z")
Hey I was wondering if anyone in the burgh has any experience with taking of the complete front end of a 240. I have one that is wrecked and one with a bad frame so I was going to swap the front ends. Any info is greatly appreciated. ---
**Author:** ![BlackZ28](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blackz28/32/5932_2.png) [@BlackZ28](https://forums.speedlife.net/u/BlackZ28)\ **Post date:** [July 23, 2007, 1:30pm UTC](https://forums.speedlife.net/t/240sx-question/191334/2 "2007-07-23T13:30:01Z")
are the front frame rails bent? if so, you’ll probably have to either have them repaired or new ones welded on. ---
**Author:** ![imported\_steve](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_steve/32/6050_2.png) [@imported\_steve](https://forums.speedlife.net/u/imported_steve)\ **Post date:** [July 23, 2007, 2:46pm UTC](https://forums.speedlife.net/t/240sx-question/191334/3 "2007-07-23T14:46:35Z")
I guess you didn’t understand what I am saying. the WHOLE FRONT END IS BENT on one car, I’m going to cut it off and take the STRAIGHT front end off the other one and weld it on. What I want to know is if anyone knows of an easy way to cut the front ends off. I want to cut it right at the fire wall, I’m going drill out the factory spot welds. But I don’t know if there is a way that the front end can actually come off cleanly without cutting the crap out of it. ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [July 23, 2007, 3:31pm UTC](https://forums.speedlife.net/t/240sx-question/191334/4 "2007-07-23T15:31:26Z")
buy a good spotweld drill bit. can get at any body supply store. and get some extra cutters as you will need them. i would talk to a frame shop and see what they would need. that way they can make sure it is straight. the new apron neeeds to line up. ---
**Author:** ![steelcitysix](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/steelcitysix/32/5992_2.png) [@steelcitysix](https://forums.speedlife.net/u/steelcitysix)\ **Post date:** [July 26, 2007, 12:31am UTC](https://forums.speedlife.net/t/240sx-question/191334/5 "2007-07-26T00:31:30Z")
Im goin to loyds friday …let me know if you want anything steve. ---
**Author:** ![imported\_steve](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_steve/32/6050_2.png) [@imported\_steve](https://forums.speedlife.net/u/imported_steve)\ **Post date:** [July 26, 2007, 5:11pm UTC](https://forums.speedlife.net/t/240sx-question/191334/6 "2007-07-26T17:11:38Z")
SPOT WELD DRILL BITS LOL call me