# 260hp / 260lbs @ 14psi **URL:** \ **Category:** SON240sx Automotive\ **Created:** [April 16, 2007, 7:11am UTC](https://forums.speedlife.net/t/260hp-260lbs-14psi/105607 "2007-04-16T07:11:34Z")\ **Posts on this page:** 9\ **Page:** 2
**Author:** ![nocwage](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nocwage/32/5489_2.png) [@nocwage](https://forums.speedlife.net/u/nocwage)\ **Post date:** [April 16, 2007, 11:47am UTC](https://forums.speedlife.net/t/260hp-260lbs-14psi/105607/21 "2007-04-16T11:47:49Z")
Maybe the dyno run went to 7000 but the output didn’t bother showing anything beyond 6200? To give an example of the difference… if everthign ‘shifts’ over 800rpm (so that the end of the graph is 7000 instead of 6200) then at 6000rpm he’d still be making 260lb-ft and thus 260 \* 6000 /5252 = 297hp… Which is probably not likely on a T25… but then again neither is 260 😃 So maybe the RPM part of the graph is accurate and it just didn’t SHOW what happened after 6200… ---
**Author:** ![roast](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/roast/32/5498_2.png) [@roast](https://forums.speedlife.net/u/roast)\ **Post date:** [April 16, 2007, 11:50am UTC](https://forums.speedlife.net/t/260hp-260lbs-14psi/105607/22 "2007-04-16T11:50:48Z")
> [@On another topic](https://forums.speedlife.net/t/12155/4): > > But the graph shows the peak 260hp and the 5252 crossover… > If the RPM on the graph is wrong then the lb-ft @ XXXX RPM is wrong making HP (rpm \* torque / 5252) wrong… > > If the RPM on the graph doesn’t match what your actual engine speed was then HP cannot be accurate… > > Not saying you made less hp or anything, infact if the rpm shown is LOWER than it was then you probably made MORE horsepower than 260… nocwage is on to something here; the graph is a representation of data being used to calcualte HP/TQ and if it’s inaccurate the calculations will be scewed. Sure the torque curve will look similar but the numbers will be different. ---
**Author:** ![nocwage](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nocwage/32/5489_2.png) [@nocwage](https://forums.speedlife.net/u/nocwage)\ **Post date:** [April 16, 2007, 12:39pm UTC](https://forums.speedlife.net/t/260hp-260lbs-14psi/105607/23 "2007-04-16T12:39:38Z")
Dustin, I forget, do you have an aftermarket tach? If you’re using the stock one then you may not have gone much beyond 6200… When I was dyno’ing my car back in Jan I thought I was taking it to 7000 but each time it was only around 6200 :’( ---
**Author:** ![mr\_240sx](https://avatars.discourse-cdn.com/v4/letter/m/b5a626/32.png) [@mr\_240sx](https://forums.speedlife.net/u/mr_240sx)\ **Post date:** [April 16, 2007, 2:51pm UTC](https://forums.speedlife.net/t/260hp-260lbs-14psi/105607/24 "2007-04-16T14:51:14Z")
> [@can you swim like this?](https://forums.speedlife.net/t/can-you-swim-like-this/12151/7): > > He has Nismo 550CC injectors I’m pretty sure. well my bad…i thought i read he was running stock injectors… ---
**Author:** ![jammin1911](https://avatars.discourse-cdn.com/v4/letter/j/a9a28c/32.png) [@jammin1911](https://forums.speedlife.net/u/jammin1911)\ **Post date:** [April 16, 2007, 7:01pm UTC](https://forums.speedlife.net/t/260hp-260lbs-14psi/105607/25 "2007-04-16T19:01:17Z")
I’m not sure if he did this already or not but Dustin could easily just check the logs on the Datalogit to see when Dan started and stopped the run. That would probably clarify a few things for us 🙂 ---
**Author:** ![Hurricane](https://avatars.discourse-cdn.com/v4/letter/h/e9bcb4/32.png) [@Hurricane](https://forums.speedlife.net/u/Hurricane)\ **Post date:** [April 17, 2007, 5:53am UTC](https://forums.speedlife.net/t/260hp-260lbs-14psi/105607/26 "2007-04-17T05:53:38Z")
It defintately stopped at 7000rpm. ---
**Author:** ![Gonad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gonad/32/5481_2.png) [@Gonad](https://forums.speedlife.net/u/Gonad)\ **Post date:** [April 17, 2007, 6:26am UTC](https://forums.speedlife.net/t/260hp-260lbs-14psi/105607/27 "2007-04-17T06:26:20Z")
> [@FS: Sabres Game 1 @ Home (up to 4 tickets together)](https://forums.speedlife.net/t/fs-sabres-game-1-home-up-to-4-tickets-together/12148/49): > > I’m not sure if he did this already or not but Dustin could easily just check the logs on the Datalogit to see when Dan started and stopped the run. That would probably clarify a few things for us 🙂 Yea but Dustin’s probablly too lazy to do this for us. He’s already confirmed that with me over chat. :o Minus well leave us wondering, irregardless of the current debate over the actual numbers. ---
**Author:** ![Hurricane](https://avatars.discourse-cdn.com/v4/letter/h/e9bcb4/32.png) [@Hurricane](https://forums.speedlife.net/u/Hurricane)\ **Post date:** [April 17, 2007, 6:36am UTC](https://forums.speedlife.net/t/260hp-260lbs-14psi/105607/28 "2007-04-17T06:36:54Z")
Don’t you break start with me boy! I posted above that I checked the logs and it stopped at 7000RPM. Now I want to put the Z32 on and see if I can make a bit more power. ---
**Author:** ![jammin1911](https://avatars.discourse-cdn.com/v4/letter/j/a9a28c/32.png) [@jammin1911](https://forums.speedlife.net/u/jammin1911)\ **Post date:** [April 17, 2007, 8:18am UTC](https://forums.speedlife.net/t/260hp-260lbs-14psi/105607/29 "2007-04-17T08:18:07Z")
At what RPM did the pull start? That would explain a few things if we knew what the entire actual range was… Dan, any update from Dynapack?! [Previous page](https://forums.speedlife.net/t/260hp-260lbs-14psi/105607.md?page=1)