# 26mm rotors??

**URL:** <https://forums.speedlife.net/t/26mm-rotors/108386>\
**Category:** SON240sx Automotive\
**Created:** [August 9, 2007, 10:29am UTC](https://forums.speedlife.net/t/26mm-rotors/108386 "2007-08-09T10:29:19Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![white240](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/white240/32/5651_2.png) [@white240](https://forums.speedlife.net/u/white240)\
**Post date:** [August 9, 2007, 10:29am UTC](https://forums.speedlife.net/t/26mm-rotors/108386/1 "2007-08-09T10:29:19Z")

</div>

I had 26mm z32 brembo front rotors on order, but I got a call today that they are unavilable, and no one can get anything even close to them. Great.

Does anyone have any suggestions where I could get an 11in 26mm 5 lug rotor?  
I’ve got brembos in the back (mainly just because I got a good deal on them)…so I obviously don’t really want to have crappy ones in the front, but I’m out of options, and according to the 3 sources I’ve tried, there is none.

Any suggestions are appreciated.

Thanks,  
Mark

---

<div class="post-metadata">

**Author:** ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)\
**Post date:** [August 9, 2007, 10:33am UTC](https://forums.speedlife.net/t/26mm-rotors/108386/2 "2007-08-09T10:33:27Z")

</div>

Q45/J30 are both 5 lug and run a 280mm x 22mm Rotor.

Z32 is 280mm x 26mm but honestly… the 4mm diff is fuck all. The pads will take up the 2mm each side easily.

Its also a good option for people with S13s who dont wanna re-drill the 5 lug Z32 rotors to 4 lug.

---

<div class="post-metadata">

**Author:** ![white240](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/white240/32/5651_2.png) [@white240](https://forums.speedlife.net/u/white240)\
**Post date:** [August 9, 2007, 11:08am UTC](https://forums.speedlife.net/t/26mm-rotors/108386/3 "2007-08-09T11:08:02Z")

</div>

Any particular years/ trim lines I should ask for when getting the q45/j30 rotors?  
Anyone have a part number? Ha, thats asking a bit much, but I’ll throw it out there anyways. I’m just tired of not fully informing myself and getting the wrong parts.