# \#3 Rod Bearing Pics **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [January 12, 2006, 7:07pm UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452 "2006-01-12T19:07:04Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\ **Post date:** [January 12, 2006, 7:07pm UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/1 "2006-01-12T19:07:04Z")
Pictures of the mysterious metal piece, the #3 rod bearing, and the crank finish. The finish on the #1 looks a little nicer! ---
**Author:** ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)\ **Post date:** [January 12, 2006, 7:17pm UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/2 "2006-01-12T19:17:06Z")
damn!!! ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [January 12, 2006, 7:20pm UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/3 "2006-01-12T19:20:00Z")
spun ---
**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\ **Post date:** [January 12, 2006, 7:23pm UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/4 "2006-01-12T19:23:08Z")
Top half went inside the bottom half. ---
**Author:** ![Bravada\_442](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bravada_442/32/5982_2.png) [@Bravada\_442](https://forums.speedlife.net/u/Bravada_442)\ **Post date:** [January 12, 2006, 7:41pm UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/5 "2006-01-12T19:41:24Z")
:eek2: ---
**Author:** ![MONTE\_SS](https://avatars.discourse-cdn.com/v4/letter/m/8797f3/32.png) [@MONTE\_SS](https://forums.speedlife.net/u/MONTE_SS)\ **Post date:** [January 13, 2006, 6:54am UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/6 "2006-01-13T06:54:24Z")
I was going to say just doesn;t look like normal wear, and then let go, Can the crank be polished out, any major damage there? ---
**Author:** ![publikdstrbnce](https://avatars.discourse-cdn.com/v4/letter/p/ea5d25/32.png) [@publikdstrbnce](https://forums.speedlife.net/u/publikdstrbnce)\ **Post date:** [January 13, 2006, 8:02am UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/7 "2006-01-13T08:02:33Z")
my buddy did that to his 95 cobra. It has a 351 windsor in it. Galded the 2 bearings together. He has to buy a new crank now. ---
**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\ **Post date:** [January 13, 2006, 8:24am UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/8 "2006-01-13T08:24:06Z")
I’m just going straight to a new short block. ---
**Author:** ![oneslowbowtie](https://avatars.discourse-cdn.com/v4/letter/o/d78d45/32.png) [@oneslowbowtie](https://forums.speedlife.net/u/oneslowbowtie)\ **Post date:** [January 13, 2006, 12:08pm UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/9 "2006-01-13T12:08:38Z")
> [@Jeff95TA](#): > > I’m just going straight to a new short block. What are you doing with block you have there, I might be interested ---
**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\ **Post date:** [January 13, 2006, 2:04pm UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/10 "2006-01-13T14:04:11Z")
> [@oneslowbowtie](#): > > What are you doing with block you have there, I might be interested :dunno: Paper weight? I’m going to have one of Lloyd Elliot’s cams for sale too (the LE1) since I’m going a little bigger. And some 30lb SVO injectors. Only 700 miles on them. Cam looks like new. This upgrade sure isn’t happening in the most cost effective manner! ---
**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\ **Post date:** [January 13, 2006, 2:09pm UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/11 "2006-01-13T14:09:27Z")
> [@Jeff95TA](#): > > :dunno: Paper weight? > > I’m going to have one of Lloyd Elliot’s cams for sale too (the LE1) since I’m going a little bigger. And some 30lb SVO injectors. Only 700 miles on them. Cam looks like new. This upgrade sure isn’t happening in the most cost effective manner! info on cam? what are the specs ---
**Author:** ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)\ **Post date:** [January 13, 2006, 2:21pm UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/12 "2006-01-13T14:21:32Z")
> [@Jeff95TA](#): > > :dunno: Paper weight? > > I’m going to have one of Lloyd Elliot’s cams for sale too (the LE1) since I’m going a little bigger. And some 30lb SVO injectors. Only 700 miles on them. Cam looks like new. This upgrade sure isn’t happening in the most cost effective manner! nice!!! GM 847 cam??? or LE3 cam…which makes a little more power than the 847 cam?? ---
**Author:** ![oneslowbowtie](https://avatars.discourse-cdn.com/v4/letter/o/d78d45/32.png) [@oneslowbowtie](https://forums.speedlife.net/u/oneslowbowtie)\ **Post date:** [January 13, 2006, 6:13pm UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/13 "2006-01-13T18:13:42Z")
> [@Jeff95TA](#): > > :dunno: Paper weight? > > I’m going to have one of Lloyd Elliot’s cams for sale too (the LE1) since I’m going a little bigger. And some 30lb SVO injectors. Only 700 miles on them. Cam looks like new. This upgrade sure isn’t happening in the most cost effective manner! Dont just throw it away ---
**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\ **Post date:** [January 13, 2006, 6:34pm UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/14 "2006-01-13T18:34:07Z")
I’m going to sell the block. Also have Comp double springs with titanium retainers to go with the cam. Cam is 224/236 on a 110. Can’t remember the lift. Mid .5’s. ---
**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\ **Post date:** [January 13, 2006, 7:17pm UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/15 "2006-01-13T19:17:33Z")
> [@Jeff95TA](#): > > I’m going to sell the block. Also have Comp double springs with titanium retainers to go with the cam. > > Cam is 224/236 on a 110. Can’t remember the lift. Mid .5’s. price? i was gonna use the cc306 cam in the truck but this should be pretty close i would think ---
**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\ **Post date:** [January 14, 2006, 5:50am UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/16 "2006-01-14T05:50:31Z")
I paid $350 for the cam. Not sure what they are going for used. I’ll look around on some of the boards. You have springs already? I’m kicking myself right now for spending $130 on titanium retainers and not being able to reuse them with the beehive springs. New ones will be steel! ---
**Author:** ![MONTE\_SS](https://avatars.discourse-cdn.com/v4/letter/m/8797f3/32.png) [@MONTE\_SS](https://forums.speedlife.net/u/MONTE_SS)\ **Post date:** [January 14, 2006, 9:43am UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/17 "2006-01-14T09:43:44Z")
i HAVE A bare block 350 2 piece rear main, 6000, miles can still see the cross hatches, was my Fast burn 385, Broke the Fly wheel, So I rorn it down and parted everything out, let me know! ---
**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\ **Post date:** [January 14, 2006, 9:46am UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/18 "2006-01-14T09:46:04Z")
used cc306’s are about 100-125, there one on ls1tech right now. and no, i don’t have springs yet. i need to get the heads machined for them, so i hadn’t decided which ones yet. ---
**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\ **Post date:** [January 14, 2006, 10:38am UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/19 "2006-01-14T10:38:41Z")
> [@eurodad](#): > > used cc306’s are about 100-125, there one on ls1tech right now. and no, i don’t have springs yet. i need to get the heads machined for them, so i hadn’t decided which ones yet. You’d probably be better going with the 306. I’d like to sell you this one cheap but I need to get as much for it as I can to pay for the new stuff. I need to find someone specifically looking for this cam if possible. ---
**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\ **Post date:** [January 14, 2006, 1:40pm UTC](https://forums.speedlife.net/t/3-rod-bearing-pics/179452/20 "2006-01-14T13:40:43Z")
> [@Jeff95TA](#): > > You’d probably be better going with the 306. I’d like to sell you this one cheap but I need to get as much for it as I can to pay for the new stuff. I need to find someone specifically looking for this cam if possible. i figured that, i did some research and was thinking i wanted the 306 anyway. [Next page](https://forums.speedlife.net/t/3-rod-bearing-pics/179452.md?page=2)