# 300zx Brembos to CTS-V Brembos
**URL:** https://forums.speedlife.net/t/300zx-brembos-to-cts-v-brembos/127551
**Category:** SON240sx Automotive
**Created:** [August 28, 2009, 3:10pm UTC](https://forums.speedlife.net/t/300zx-brembos-to-cts-v-brembos/127551 "2009-08-28T15:10:43Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@Conte6](https://forums.speedlife.net/u/Conte6)
#### Post date: [August 28, 2009, 3:10pm UTC](https://forums.speedlife.net/t/300zx-brembos-to-cts-v-brembos/127551/1 "2009-08-28T15:10:43Z")
Hello ladies,
I currently have 300ZX Twin Turbo Calipers on the 240sx, however, I am looking for a little more “bling” if you will. I would like to do something not to many have attempted and completed though, simply to be unique.
I recently came across Cadillac CTS-V Brembos for a seriously good price. I would need to sell my 300ZX rotors, calipers, and pads which won’t be a problem. However, I have done some research and a bit of calculations, and found that Evo 8 rotors (or 350z track pack rotors) will suffice. My stainless steel lines will work, the rotors shouldn’t be a problem, and the calipers I can get no problem.
**This is where my problem lies:
The mounting holes for the caliper, to the knuckle obviously don’t match up. I would need a caliper bracket. Does anyone have any clue where I can go to make one, or have one made? I would need the bracket to be able to drop the caliper approximately 1 inch from where it normally rests, to grab the rotors effectively and efficiently.**
Anyone have any leads or clues as to what something like this is going to cost and where to go. Thanks in advance
[](http://img20.imageshack.us/i/img7549.jpg/)
**_TO THIS_**
[](http://img10.imageshack.us/i/ls1ctsv004web.jpg/)
---
### Author:  [@S13counterpart](https://forums.speedlife.net/u/S13counterpart)
#### Post date: [August 28, 2009, 3:21pm UTC](https://forums.speedlife.net/t/300zx-brembos-to-cts-v-brembos/127551/2 "2009-08-28T15:21:49Z")
Call PUR Auto 1-416-787-2886.
I know they can make it. Cost would depend. Mild Steel? Aluminum? Gold? lol
---
### Author:  [@bing](https://forums.speedlife.net/u/bing)
#### Post date: [August 28, 2009, 3:25pm UTC](https://forums.speedlife.net/t/300zx-brembos-to-cts-v-brembos/127551/3 "2009-08-28T15:25:08Z")
if you draw it up i can have it made for you