# 300zx exhausts **URL:** \ **Category:** Canada Nissan Automotive\ **Created:** [April 5, 2007, 12:51pm UTC](https://forums.speedlife.net/t/300zx-exhausts/146337 "2007-04-05T12:51:15Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![CNismo300ZX](https://avatars.discourse-cdn.com/v4/letter/c/f0a364/32.png) [@CNismo300ZX](https://forums.speedlife.net/u/CNismo300ZX)\ **Post date:** [April 5, 2007, 12:51pm UTC](https://forums.speedlife.net/t/300zx-exhausts/146337/1 "2007-04-05T12:51:15Z")
i got 2 4.5 inch exhausts and im wondering what angle to put them on theres is to the side straight or straight upwards want it to look the nicest but i dont want junk to go into the pipe like rain write me back with some sugestions thanks ---
**Author:** ![Red\_To\_Rip](https://avatars.discourse-cdn.com/v4/letter/r/7cd45c/32.png) [@Red\_To\_Rip](https://forums.speedlife.net/u/Red_To_Rip)\ **Post date:** [April 5, 2007, 12:54pm UTC](https://forums.speedlife.net/t/300zx-exhausts/146337/2 "2007-04-05T12:54:31Z")
most mufflers have drain holes. so as long as it’s not angled too much, you should be fine. either or, twin mufflers look great. ---
**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\ **Post date:** [April 5, 2007, 5:21pm UTC](https://forums.speedlife.net/t/300zx-exhausts/146337/3 "2007-04-05T17:21:21Z")
Put it on so there are the least amount of bends in the system don’t just angle it cuz you want to be cool ---
**Author:** ![Jason\_Lange](https://avatars.discourse-cdn.com/v4/letter/j/65b543/32.png) [@Jason\_Lange](https://forums.speedlife.net/u/Jason_Lange)\ **Post date:** [April 5, 2007, 7:28pm UTC](https://forums.speedlife.net/t/300zx-exhausts/146337/4 "2007-04-05T19:28:33Z")
Make sure you weld the “outlet” to the rest of the piping. Smetimes guys mix this part up and weld it the other way around. Hope that helps.