# 300ZX Front Clip Disassembly **URL:** \ **Category:** Canada Nissan Automotive\ **Created:** [April 27, 2007, 4:11pm UTC](https://forums.speedlife.net/t/300zx-front-clip-disassembly/133399 "2007-04-27T16:11:55Z")\ **Posts on this page:** 1\ **Showing post:** 52
**Author:** ![pcproa](https://avatars.discourse-cdn.com/v4/letter/p/c5a1d2/32.png) [@pcproa](https://forums.speedlife.net/u/pcproa)\ **Post date:** [May 26, 2007, 1:47pm UTC](https://forums.speedlife.net/t/300zx-front-clip-disassembly/133399/52 "2007-05-26T13:47:13Z")
> [@Your Rep and You...](https://forums.speedlife.net/t/your-rep-and-you/1616/19): > > Patrick, I think I asked you before but I don’t recall. I believe that front clip had the cruise control on it. If so, I’d like to buy the right hand side controls of the instrument that contain the switch for the cruise control and the cruise control unit from the engine bay. I believe all of the wiring harness will still be the same in mine so it should be a straight forward plug-n-play affair… I hope. I’ll confirm this on the aussie Forum though. For some strange reason, cruise control was an option for the J-Spec TT 5speeds…go figure. I’m assuming that this won’t require any additional wiring as most harnesses between these (J-Spec’s) would have been the same anyway. > Thanks, > John Yup. I have all the cruise control stuff. Switches, control Unit, Actuators, etc, etc. I think I can use my existing actuator so you can probably take that too. I’ll check and let you know. --- _[View the full topic](https://forums.speedlife.net/t/300zx-front-clip-disassembly/133399)._