# 350 L98 roller longblock for sale

**URL:** <https://forums.speedlife.net/t/350-l98-roller-longblock-for-sale/195926>\
**Category:** Classifieds\
**Created:** [March 5, 2008, 1:18pm UTC](https://forums.speedlife.net/t/350-l98-roller-longblock-for-sale/195926 "2008-03-05T13:18:51Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Orr89rocz](https://avatars.discourse-cdn.com/v4/letter/o/ac91a4/32.png) [@Orr89rocz](https://forums.speedlife.net/u/Orr89rocz)\
**Post date:** [March 5, 2008, 1:18pm UTC](https://forums.speedlife.net/t/350-l98-roller-longblock-for-sale/195926/1 "2008-03-05T13:18:51Z")

</div>

Selling my old L98 from my 89 camaro

Its a roller block. Cam is out of it at the moment but you will get the lifters/cam/pushrods/, oil pan, oil pump, balancer, flexplate. Timing chain is shot so you’ll need one of those. Timing cover i’m keeping.  
Lifter retainer plates/spider i’m keeping as well.

all stock, 158k miles but still runs strong. Went 12.90’s with STOCK heads/cam with bolt ons this past november before i tore it down so i can put in my 383. 🙂 Just needs put back together. Cam bearings have a little bit of wear but will last another year or two easily.

EDIT: Heads/valvecovers SOLD!!

Asking 200 or best offers for the shortblock plus oil pan/pump. Motor is still in the car so i have to pull it out yet 🙂

---

<div class="post-metadata">

**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\
**Post date:** [March 5, 2008, 4:21pm UTC](https://forums.speedlife.net/t/350-l98-roller-longblock-for-sale/195926/2 "2008-03-05T16:21:01Z")

</div>

when you decide to give it away i’ll take it.

---

<div class="post-metadata">

**Author:** ![Orr89rocz](https://avatars.discourse-cdn.com/v4/letter/o/ac91a4/32.png) [@Orr89rocz](https://forums.speedlife.net/u/Orr89rocz)\
**Post date:** [March 5, 2008, 5:03pm UTC](https://forums.speedlife.net/t/350-l98-roller-longblock-for-sale/195926/3 "2008-03-05T17:03:16Z")

</div>

I wont give it away for free 😉

---

<div class="post-metadata">

**Author:** ![slowcamaro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slowcamaro/32/5975_2.png) [@slowcamaro](https://forums.speedlife.net/u/slowcamaro)\
**Post date:** [March 8, 2008, 7:31pm UTC](https://forums.speedlife.net/t/350-l98-roller-longblock-for-sale/195926/4 "2008-03-08T19:31:58Z")

</div>

whats going in there now…

also forewarded this to my brother since he is doing another s10 v8 swap

---

<div class="post-metadata">

**Author:** ![Orr89rocz](https://avatars.discourse-cdn.com/v4/letter/o/ac91a4/32.png) [@Orr89rocz](https://forums.speedlife.net/u/Orr89rocz)\
**Post date:** [March 9, 2008, 12:55am UTC](https://forums.speedlife.net/t/350-l98-roller-longblock-for-sale/195926/5 "2008-03-09T00:55:25Z")

</div>

heads/rocker arms/valve covers sold

selling shortblock with oil pan/oil pump, flexplate, lifters for 200 bucks or best

> whats going in there now…

check my project thread in the members project section… its gonna be a pretty stout 383 small block, AFR heads, big custom hyd roller, ported HSR intake, etc. should be 11 second car on motor