# 350 SBC parts

**URL:** <https://forums.speedlife.net/t/350-sbc-parts/225068>\
**Category:** Classifieds\
**Created:** [August 5, 2012, 3:56pm UTC](https://forums.speedlife.net/t/350-sbc-parts/225068 "2012-08-05T15:56:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![robftw](https://avatars.discourse-cdn.com/v4/letter/r/6bbea6/32.png) [@robftw](https://forums.speedlife.net/u/robftw)\
**Post date:** [August 5, 2012, 3:56pm UTC](https://forums.speedlife.net/t/350-sbc-parts/225068/1 "2012-08-05T15:56:37Z")

</div>

I have a set of speed pro H859CP .40 overbore pistons with rings for chevy stroker engines, with machined rods for clearance. 125$

Part  
number H859CP40  
CID 385  
58.0cc 10.33  
60.5cc 10.06  
64.cc 9.71  
68.cc 9.34  
72.cc 9.00  
76.cc 8.69

Flexplate 153 tooth, weighted 25$

Starter, BRAND NEW straight bolt used for -500 miles 130$ new fits 153 tooth flexplates / flywheels 80$

Performance products internally balanced harmonic balancer - 75$

Holley 600 cfm vac. secondaries carb #74 jets 100$

Isky 270 Mega cam, .465 lift 270 duration 221 @ .50 108 Lobe center 75$

Also have a bare block unmolested, 2bolt main has provisions for hyd roller cam set up, needs hot tank / bore / hone cause its rusty. - 50$

[ATTACH=CONFIG]21715[/ATTACH]

716-445-0883

---

<div class="post-metadata">

**Author:** ![robftw](https://avatars.discourse-cdn.com/v4/letter/r/6bbea6/32.png) [@robftw](https://forums.speedlife.net/u/robftw)\
**Post date:** [August 16, 2012, 6:41pm UTC](https://forums.speedlife.net/t/350-sbc-parts/225068/2 "2012-08-16T18:41:55Z")

</div>

bump