# 3rd gen rx7 parts **URL:** \ **Category:** Classifieds\ **Created:** [December 14, 2009, 2:06pm UTC](https://forums.speedlife.net/t/3rd-gen-rx7-parts/77241 "2009-12-14T14:06:48Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Since\_1983](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/since_1983/32/5362_2.png) [@Since\_1983](https://forums.speedlife.net/u/Since_1983)\ **Post date:** [December 14, 2009, 2:06pm UTC](https://forums.speedlife.net/t/3rd-gen-rx7-parts/77241/1 "2009-12-14T14:06:48Z")
selling for a friend, feel free to as any questions… all these parts sitting around taking up space in his garage, he will NEVER use these again,so the first _reasonable_ offer will be accepted. Shipping is included in price unless specified. factory mazda r1 spoiler, in good condition. ($250) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) Factory mazda subframe in perfect condition ($150 plus shipping) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) Factory engine harness (turbo control solenoid plug has been modified) ($250 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) Secondary fuel rail ($35 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) Aftermarket air separator tank ($45 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) pettit racing air intake system ($150 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) A/C unit ($110 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) power steering pump ($100 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) clutch master cylinder ($30 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) oil cooler W/ 10 a/n fittings on it ($150 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) factory tie rods (15k miles) ($40 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) factory power steering pulley 1yr old ($35 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) power plant frame, welded and reinforced ($200 plus shipping) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) factory drive shaft, good U joints ($100 plus shipping) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) oil Supply lines ($20 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) NGK plug wires ($50 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) A/C evaporator ($25 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) Turbo Manifold ($200 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) ABS Control unit ($20 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) Aftermarket pulleys ($50 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) BNIB Racing beat rear sway bar NEVER USED w/bushings ($140 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) Clutch slave cylinder ($25 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) Fuel filter as pictured 3k miles ($25 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) Cruise control control unit ($30 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) Coolant filler neck assembly ($25 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) Starter ( $60 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) high flow cat (gutted) ($110 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) Oil return lines ($25 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) 2nd gen ignitor coil ($50 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) 3rd gen ignition coils, leading & trailing ($75 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) 3rg gen ignitor box ($15 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) Factory BOSE rear carpet )$60 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) factory tortion LSD still perfect ($100 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) ACT light flywheel (12lbs) w/ counterweight ($150 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) ACT pressure plate ($200 shipped) Comes with disc but disc is pretty spent [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) lower Intake manifold ($75 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) jacobs Rotary propack BNIB never used ($200 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) Coil pack harness, brand new ($25 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) Throttle body w/ gasket and all sensors ($75 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) 3 bar GM map sensor ($40 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) Rotary performance downpipe w/multiple o2 bungs ($125 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) Stock Twin turbos (6/10 condition, turbine wheels slightly nicked, don’t burn oil) ($250 shipped) [![](http://pic.photobucket.com/bwe.png) ](http://pic.photobucket.com/bwe.png) ---
**Author:** ![Bakes](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bakes/32/7469_2.png) [@Bakes](https://forums.speedlife.net/u/Bakes)\ **Post date:** [December 17, 2009, 9:48am UTC](https://forums.speedlife.net/t/3rd-gen-rx7-parts/77241/2 "2009-12-17T09:48:58Z")
Is this all of Jareds’ old stuff from his swapped Rx-7? Bump for a good guy and seller! ---
**Author:** ![Since\_1983](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/since_1983/32/5362_2.png) [@Since\_1983](https://forums.speedlife.net/u/Since_1983)\ **Post date:** [December 17, 2009, 9:59pm UTC](https://forums.speedlife.net/t/3rd-gen-rx7-parts/77241/3 "2009-12-17T21:59:15Z")
yeah, he has some leftover lsx stuff too, aftermarket head stuff, friggin car is nuts… ---
**Author:** ![Bakes](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bakes/32/7469_2.png) [@Bakes](https://forums.speedlife.net/u/Bakes)\ **Post date:** [December 18, 2009, 5:52am UTC](https://forums.speedlife.net/t/3rd-gen-rx7-parts/77241/4 "2009-12-18T05:52:24Z")
> [@Since 1983](#): > > friggin car is nuts… Whew…I’ll hope to see it this coming year… ---
**Author:** ![Rx7walker](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rx7walker/32/5441_2.png) [@Rx7walker](https://forums.speedlife.net/u/Rx7walker)\ **Post date:** [December 18, 2009, 1:42pm UTC](https://forums.speedlife.net/t/3rd-gen-rx7-parts/77241/5 "2009-12-18T13:42:50Z")
where does he live? id like to compare it to mine and see his setup. i’m running a fully built ls2 in a 93. so much fun!! Ryan ---
**Author:** ![Since\_1983](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/since_1983/32/5362_2.png) [@Since\_1983](https://forums.speedlife.net/u/Since_1983)\ **Post date:** [December 20, 2009, 1:16am UTC](https://forums.speedlife.net/t/3rd-gen-rx7-parts/77241/6 "2009-12-20T01:16:18Z")
pm’ed