# 4g63 Blocks, heads, and internals - 6 bolt and 7 bolt
**URL:** https://forums.speedlife.net/t/4g63-blocks-heads-and-internals-6-bolt-and-7-bolt/226881
**Category:** Classifieds
**Created:** [October 30, 2012, 3:24pm UTC](https://forums.speedlife.net/t/4g63-blocks-heads-and-internals-6-bolt-and-7-bolt/226881 "2012-10-30T15:24:38Z")
**Posts on this page:** 7
**Page:** 1
### Author:  [@Hortanica](https://forums.speedlife.net/u/Hortanica)
#### Post date: [October 30, 2012, 3:24pm UTC](https://forums.speedlife.net/t/4g63-blocks-heads-and-internals-6-bolt-and-7-bolt/226881/1 "2012-10-30T15:24:38Z")
Figure its getting into winter and people are going to be wanting to do projects/new motors soon. I have a bunch of good cores, or use as is stuff.
6 bolt:
2 long block Motors that were pulled running. Both have over 100k miles on them and i would AT LEAST suggest re-ring/cleaning them but if you need something you can get away with running them as is. 1 motor has a 6 bolt head, the other has a 7 bolt head with the stud holes bored out to accept the larger bolts. no water pipes, sensors, or valve covers come with.
7 bolt:
4 Heads.
2 are complete with valves, springs, and cams
2 are missing cams
3 blocks
1x 99 block with thrust washer, stock bore never decked
2x 95-97 block bored .020 over
1x Crank. Spun bearing and will need to be ground. _this may change, as i am dropping a bunch of stuff off at a machine shop and might have this done now_
7 bolt 2.4L
I REALLY dont want to sell this, but if the price is right I will and go a different route.
This is a complete running motor that was pulled from a spyder and was just stock rebuilt. My plans now are to do a stroker build in another 2.0l block i have, but nothing is set in stone yet.
As for prices, make me an offer. I love trades too btw. so any parts, electronics, project cars, whatever…let me know chances are ill take ya up on the offer.
Also if you want a motor built or anything done, let me know and i can get together whatever setup you want.
Send me a PM if you want anything. My number is 7163435166, but…i am fucking terrible at responding to people and i for some reason forget my phone exists. I do not have my phone on my if i am in the garage, or doing anything other than sitting or sometimes in class and i do not text and drive. so if you text me and i dont get back to you immediately or even the same day please dont take it personally…unf its me 😕
---
### Author:  [@Hybridevo](https://forums.speedlife.net/u/Hybridevo)
#### Post date: [October 30, 2012, 5:31pm UTC](https://forums.speedlife.net/t/4g63-blocks-heads-and-internals-6-bolt-and-7-bolt/226881/2 "2012-10-30T17:31:41Z")
Prices? How much for the 2.4? I only want the block no crank etc.
---
### Author:  [@Hortanica](https://forums.speedlife.net/u/Hortanica)
#### Post date: [October 30, 2012, 5:39pm UTC](https://forums.speedlife.net/t/4g63-blocks-heads-and-internals-6-bolt-and-7-bolt/226881/3 "2012-10-30T17:39:34Z")
100 for the block, but its not gonna work for an evo build. it would need to be for a dsm 4g63/4g64 build
---
### Author:  [@Hybridevo](https://forums.speedlife.net/u/Hybridevo)
#### Post date: [October 31, 2012, 4:37am UTC](https://forums.speedlife.net/t/4g63-blocks-heads-and-internals-6-bolt-and-7-bolt/226881/4 "2012-10-31T04:37:17Z")
And why is that? It should bolt up no problem, just need to tap for Mivec.
---
### Author:  [@Hortanica](https://forums.speedlife.net/u/Hortanica)
#### Post date: [October 31, 2012, 9:33am UTC](https://forums.speedlife.net/t/4g63-blocks-heads-and-internals-6-bolt-and-7-bolt/226881/5 "2012-10-31T09:33:28Z")
the block is mirrored. the same reason dsm guys cant use evo blocks.
the 4g64 engine i have is from a 96 spyder, which is the same block as the dsm 4g63, just with a 6mm higher deck height and a few other changes. its not the same as from a 2000+ eclipse/lancer. the crank, internals, and i think the oil pump is the same but other then that the parts wont work.
---
### Author:  [@Hortanica](https://forums.speedlife.net/u/Hortanica)
#### Post date: [November 20, 2012, 12:35am UTC](https://forums.speedlife.net/t/4g63-blocks-heads-and-internals-6-bolt-and-7-bolt/226881/6 "2012-11-20T00:35:26Z")
Bump. someone wants a complete 6 bolt 4g63…
---
### Author:  [@Hortanica](https://forums.speedlife.net/u/Hortanica)
#### Post date: [December 9, 2012, 11:46am UTC](https://forums.speedlife.net/t/4g63-blocks-heads-and-internals-6-bolt-and-7-bolt/226881/7 "2012-12-09T11:46:15Z")
Bump. About to sell one of the 6bolt longblocks for 300$.