# 6 delphi 525CC injectors
**URL:** https://forums.speedlife.net/t/6-delphi-525cc-injectors/130653
**Category:** Classifieds
**Created:** [January 5, 2010, 10:55am UTC](https://forums.speedlife.net/t/6-delphi-525cc-injectors/130653 "2010-01-05T10:55:36Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@jayson](https://forums.speedlife.net/u/jayson)
#### Post date: [January 5, 2010, 10:55am UTC](https://forums.speedlife.net/t/6-delphi-525cc-injectors/130653/1 "2010-01-05T10:55:36Z")
hey i have a set of (6) delphi 525CC top feed injectors. they came out of a rb20 and they are in very good condition. i bought these from DK-fabiosantos\* from the forums. im asking 200$ obo. you can reach me at 647-997-3763
---
### Author:  [@jayson](https://forums.speedlife.net/u/jayson)
#### Post date: [January 5, 2010, 10:23pm UTC](https://forums.speedlife.net/t/6-delphi-525cc-injectors/130653/2 "2010-01-05T22:23:50Z")
this is from the original post [http://www.son240sx.org/forums/showthread.php?t=49056](http://www.son240sx.org/forums/showthread.php?t=49056)
Product ID: 17113738
DELPHI 50lb/hr INJECTOR
DELPHI 50 LB/HR INJECTORS
Part Number 17113738 (OE # 17104487)
Static Flow Rate: 50.0 lb/hr @ 43.5PSI (300kPa) 525cc/min or 6.4gm/sec
Static Flow Rate: 57.7 lb/hr @ 58.0PSI (400kPa) 606cc/min or 7.4gm/sec
Dynamic Flow Rate: 1.1 gm/pulse - 2.5ms pulse width and 10ms repetition rate @ 43.5PSI (300KPa)
Dynamic Flow Rate: 1.3 gm/pulse - 2.5ms pulse width and 10ms repetition rate @ 58.0PSI (400KPa)
Coil Resistance: 12 Ohms / High Impedance / High-Z (No ECM driver modifications required)
Cone Spray Angle - 22.4 degrees - Single spray cone. Approximate cone angle for 90% of spray volume
Ball/Seat Design with 6-Hole Diffuser Disc