# 615ci BBC Complete...Carb to Pan

**URL:** <https://forums.speedlife.net/t/615ci-bbc-complete-carb-to-pan/79574>\
**Category:** Classifieds\
**Created:** [February 22, 2010, 5:54am UTC](https://forums.speedlife.net/t/615ci-bbc-complete-carb-to-pan/79574 "2010-02-22T05:54:22Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![BLKUUS6](https://avatars.discourse-cdn.com/v4/letter/b/22d042/32.png) [@BLKUUS6](https://forums.speedlife.net/u/BLKUUS6)\
**Post date:** [February 22, 2010, 5:54am UTC](https://forums.speedlife.net/t/615ci-bbc-complete-carb-to-pan/79574/1 "2010-02-22T05:54:22Z")

</div>

10.2 Bowtie Block, O-ringed.  
13:1 Compression  
Lunati Crank  
Aluminum Manley Rods  
Gas Ported Wiseco Pistons  
File Fit Rings (New)  
Titan Oil Pump  
Sheet Metal Moroso Pan  
Fully Ported Dart 360 Heads (2.30/1.88 Valves)  
Fully Ported Dart intake  
Roller Cam and Jesel Valvetrain  
SFI Flywheel  
Barry Grant King Demon  
New Rod and Main Bearings  
New timing set w/ torrington bearing with new timing cover.  
New copper head gaskets.  
Block was just tanked, and honed with plates, rods and pistons were all cleaned and inspected.

$8000 or B/O

2/8/10- Had it on the dyno at BTR, made 845hp and 765 ft/lbs.

![http://static.racingjunk.com/63/ui/9/18/16390189-439-615ci-BBC-Carb-to-Pan.jpg](http://static.racingjunk.com/63/ui/9/18/16390189-439-615ci-BBC-Carb-to-Pan.jpg)

---

<div class="post-metadata">

**Author:** ![ultradriver10000](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ultradriver10000/32/7397_2.png) [@ultradriver10000](https://forums.speedlife.net/u/ultradriver10000)\
**Post date:** [February 22, 2010, 6:09am UTC](https://forums.speedlife.net/t/615ci-bbc-complete-carb-to-pan/79574/2 "2010-02-22T06:09:08Z")

</div>

Very nice glwts

10.078 L FYI

---

<div class="post-metadata">

**Author:** ![BLKUUS6](https://avatars.discourse-cdn.com/v4/letter/b/22d042/32.png) [@BLKUUS6](https://forums.speedlife.net/u/BLKUUS6)\
**Post date:** [February 22, 2010, 6:16am UTC](https://forums.speedlife.net/t/615ci-bbc-complete-carb-to-pan/79574/3 "2010-02-22T06:16:28Z")

</div>

> [@ultradriver10000](#):
>
> 10.078 L FYI

huh?

---

<div class="post-metadata">

**Author:** ![TrueBlue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/trueblue/32/7245_2.png) [@TrueBlue](https://forums.speedlife.net/u/TrueBlue)\
**Post date:** [February 22, 2010, 6:42am UTC](https://forums.speedlife.net/t/615ci-bbc-complete-carb-to-pan/79574/4 "2010-02-22T06:42:45Z")

</div>

^ displacement in liters. 10 liter engine.

That’s a big boy toy right there. What was this in?

---

<div class="post-metadata">

**Author:** ![BLKUUS6](https://avatars.discourse-cdn.com/v4/letter/b/22d042/32.png) [@BLKUUS6](https://forums.speedlife.net/u/BLKUUS6)\
**Post date:** [February 22, 2010, 6:54am UTC](https://forums.speedlife.net/t/615ci-bbc-complete-carb-to-pan/79574/5 "2010-02-22T06:54:58Z")

</div>

I realized it after I read it a few times…didnt know why it was relevant.

We bought it for the Camaro a few years ago, but was built for a dirt modified race car. It was covered in dirt etc, had random rings in it and was an overall mess. At that point, we just built a brand new 540 which I have now in my Camaro.

This was taken all the way down, cleaned and inspected, replaced all the rings and bearings and reassembled and put on the dyno. Still could use a little more of a drag race cam, but is still good for someone looking to go fast!

---

<div class="post-metadata">

**Author:** ![onefst240](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onefst240/32/7224_2.png) [@onefst240](https://forums.speedlife.net/u/onefst240)\
**Post date:** [February 23, 2010, 2:38pm UTC](https://forums.speedlife.net/t/615ci-bbc-complete-carb-to-pan/79574/6 "2010-02-23T14:38:31Z")

</div>

> [@BLKUUS6](#):
>
> I realized it after I read it a few times…didnt know why it was relevant.
> 
> We bought it for the Camaro a few years ago, but was built for a dirt modified race car. It was covered in dirt etc, had random rings in it and was an overall mess. At that point, we just built a brand new 540 which I have now in my Camaro.
> 
> This was taken all the way down, cleaned and inspected, replaced all the rings and bearings and reassembled and put on the dyno. Still could use a little more of a drag race cam, but is still good for someone looking to go fast!

Off topic but do you drag race or is this just a street car?

---

<div class="post-metadata">

**Author:** ![BLKUUS6](https://avatars.discourse-cdn.com/v4/letter/b/22d042/32.png) [@BLKUUS6](https://forums.speedlife.net/u/BLKUUS6)\
**Post date:** [February 23, 2010, 2:51pm UTC](https://forums.speedlife.net/t/615ci-bbc-complete-carb-to-pan/79574/7 "2010-02-23T14:51:25Z")

</div>

Drag Race
