# '64 Galaxie update!!

**URL:** <https://forums.speedlife.net/t/64-galaxie-update/33866>\
**Category:** NYSpeed Automotive\
**Created:** [August 14, 2007, 5:39pm UTC](https://forums.speedlife.net/t/64-galaxie-update/33866 "2007-08-14T17:39:56Z")\
**Posts on this page:** 1\
**Showing post:** 16

<div class="post-metadata">

**Author:** ![Jimmyjamz](https://avatars.discourse-cdn.com/v4/letter/j/a9adbd/32.png) [@Jimmyjamz](https://forums.speedlife.net/u/Jimmyjamz)\
**Post date:** [August 16, 2007, 4:05pm UTC](https://forums.speedlife.net/t/64-galaxie-update/33866/16 "2007-08-16T16:05:03Z")

</div>

[quote=“BrockwayMT,post:12,topic:33866"”]

This should help with the carb.

The throttle is sitting on the floor because you need a new throttle return spring as I said before.

[/quote]

Thanks for the info on the carb! I’m going to have to read into that once I finish this summer course at UAlbany… As far as the throttle return spring, I know you had mentioned it before but I basically wanted to see if it was the same spring or not…

[quote=“TrueBlue,post:14,topic:33866"”]

:tup: :tup: :tup:

Now get a thread started in DIY and begin the restoration boii 🙂

[/quote]

Hah not a bad idea! I’ll have to pop the carb off this weekend and start with that.

[quote=“POOPRA,post:15,topic:33866"”]

Looks low with flat rear tires in the rear. I think it would be sweet slammed to the ground with some nice rims. Nice cruiser

[/quote]

I definitely agree with your idea there. The only thing is I probably wouldn’t get different rims. I’d love to lower it but keep the stock hub caps 😉 I’m going to keep this car as original as possible.

---

_[View the full topic](https://forums.speedlife.net/t/64-galaxie-update/33866)._