# 6SPD EG vs ELMAL-Overpriced LS tranny
**URL:** https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177
**Category:** Shift518 Off Topic
**Created:** [August 14, 2009, 9:24am UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177 "2009-08-14T09:24:05Z")
**Posts on this page:** 20
**Page:** 3
### Author:  [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)
#### Post date: [August 17, 2009, 9:23pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/41 "2009-08-17T21:23:05Z")
> [@WTB: Tonight or Tomorrow morning only](https://forums.speedlife.net/t/wtb-tonight-or-tomorrow-morning-only/21782/4):
>
> Yeah… thank god for pressure washers. Murrdog is such a sucker
did ya ever clean out the bottom end or no?
---
### Author:  [@LKSi](https://forums.speedlife.net/u/LKSi)
#### Post date: [August 17, 2009, 9:23pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/42 "2009-08-17T21:23:33Z")
it spun through 4th. I don’t know how or why, but one tire took a beating
---
### Author:  [@Murrdog9000](https://forums.speedlife.net/u/Murrdog9000)
#### Post date: [August 17, 2009, 9:24pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/43 "2009-08-17T21:24:10Z")
> [@Off Road meet](https://forums.speedlife.net/t/off-road-meet/21663/63):
>
> lol I don’t think it was spinning through 4th gear, mine doesn’t even do that…Like Brett said, chirp, maybe.
like I said, ask lance… It may have something to do with my tires but it spun 4th
---
### Author:  [@Murrdog9000](https://forums.speedlife.net/u/Murrdog9000)
#### Post date: [August 17, 2009, 9:24pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/44 "2009-08-17T21:24:25Z")
> [@Pointless poll: Who makes their bed e'ryday](https://forums.speedlife.net/t/pointless-poll-who-makes-their-bed-eryday/21772/15):
>
> did ya ever clean out the bottom end or no?
Block was mint
---
### Author:  [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)
#### Post date: [August 17, 2009, 9:24pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/45 "2009-08-17T21:24:26Z")
> [@Pointless poll: Who makes their bed e'ryday](https://forums.speedlife.net/t/pointless-poll-who-makes-their-bed-eryday/21772/16):
>
> it spun through 4th. I don’t know how or why, but one tire took a beating
your hair acted like a sail and held it back ,it wanted to go but couldnt
---
### Author:  [@LKSi](https://forums.speedlife.net/u/LKSi)
#### Post date: [August 17, 2009, 9:24pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/46 "2009-08-17T21:24:46Z")
> [@Pointless poll: Who makes their bed e'ryday](https://forums.speedlife.net/t/pointless-poll-who-makes-their-bed-eryday/21772/15):
>
> did ya ever clean out the bottom end or no?
Nah there were still rocks, mud, hair, etc. In there when it was assembled :ohnoes
---
### Author:  [@kramerbuccs24](https://forums.speedlife.net/u/kramerbuccs24)
#### Post date: [August 17, 2009, 9:25pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/47 "2009-08-17T21:25:30Z")
well dkid’s car spins til 60 so i can definitely picture a car with about 15 less HP spinning through at LEAST 1st, but i dunno about 4th…
---
### Author:  [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)
#### Post date: [August 17, 2009, 9:25pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/48 "2009-08-17T21:25:37Z")
> [@Murrdog9000"](#):
>
> Block was mint
prolly was ,it was sandblasted .that motor got pulled do to a bent rod not bad slightly motoor had a vibration in it and we traced it to that
---
### Author:  [@Murrdog9000](https://forums.speedlife.net/u/Murrdog9000)
#### Post date: [August 17, 2009, 9:26pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/49 "2009-08-17T21:26:29Z")
> [@Got bored today... so went BMW shopping](https://forums.speedlife.net/t/got-bored-today-so-went-bmw-shopping/21755/20):
>
> well dkid’s car spins til 60 so i can definitely picture a car with about 15 less HP spinning through at LEAST 1st, but i dunno about 4th…
trust me… when I shifted into 5th, the car bogged down like a mottttttherfucker
---
### Author:  [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)
#### Post date: [August 17, 2009, 9:27pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/50 "2009-08-17T21:27:13Z")
> [@got it](https://forums.speedlife.net/t/got-it/21770/25):
>
> trust me… when I shifted into 5th, the car bogged down like a mottttttherfucker
no v-tec ha:haha
---
### Author:  [@big\_red](https://forums.speedlife.net/u/big_red)
#### Post date: [August 17, 2009, 9:27pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/51 "2009-08-17T21:27:14Z")
it used to bark 4th when i had it
---
### Author:  [@Murrdog9000](https://forums.speedlife.net/u/Murrdog9000)
#### Post date: [August 17, 2009, 9:27pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/52 "2009-08-17T21:27:59Z")
> [@Pointless poll: Who makes their bed e'ryday](https://forums.speedlife.net/t/pointless-poll-who-makes-their-bed-eryday/21772/17):
>
> prolly was ,it was sandblasted .that motor got pulled do to a bent rod not bad slightly motoor had a vibration in it and we traced it to that
I heard it was four bent rods and four bearings were spun… I didnt give a fuck though
---
### Author:  [@Murrdog9000](https://forums.speedlife.net/u/Murrdog9000)
#### Post date: [August 17, 2009, 9:28pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/53 "2009-08-17T21:28:32Z")
> [@FS: 20gb PS3 \*CHEAP\* and Elmo TMX ~ BOTH UNOPENED](https://forums.speedlife.net/t/fs-20gb-ps3-cheap-and-elmo-tmx-both-unopened/21392/17):
>
> no v-tec ha:haha
I don’t have v-tec, thats for ricers
---
### Author:  [@big\_red](https://forums.speedlife.net/u/big_red)
#### Post date: [August 17, 2009, 9:28pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/54 "2009-08-17T21:28:47Z")
> [@Womens Muscle Magz](https://forums.speedlife.net/t/womens-muscle-magz/21771/10):
>
> I heard it was four bent rods and four bearings were spun… I didnt give a fuck though
which motor?
---
### Author:  [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)
#### Post date: [August 17, 2009, 9:29pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/55 "2009-08-17T21:29:48Z")
as ya can tell im jokin …good night guys i gotta rub one off…who wants to talk dirty to me for a few minuetes
---
### Author:  [@LKSi](https://forums.speedlife.net/u/LKSi)
#### Post date: [August 17, 2009, 9:29pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/56 "2009-08-17T21:29:49Z")
The TSX block, Joe Jiggs hand sanded it with some 120 grit to flatten the deck though so it’s all good.
---
### Author:  [@Murrdog9000](https://forums.speedlife.net/u/Murrdog9000)
#### Post date: [August 17, 2009, 9:30pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/57 "2009-08-17T21:30:21Z")
> [@Pointless poll: Who makes their bed e'ryday](https://forums.speedlife.net/t/pointless-poll-who-makes-their-bed-eryday/21772/19):
>
> as ya can tell im jokin …good night guys i gotta rub one off…who wants to talk dirty to me for a few minuetes
haha word
---
### Author:  [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)
#### Post date: [August 17, 2009, 9:30pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/58 "2009-08-17T21:30:25Z")
> [@got it](https://forums.speedlife.net/t/got-it/21770/26):
>
> The TSX block, Joe Jiggs hand sanded it with some 120 grit to flatten the deck though so it’s all good.
🤣rofl:rofl
---
### Author:  [@big\_red](https://forums.speedlife.net/u/big_red)
#### Post date: [August 17, 2009, 9:31pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/59 "2009-08-17T21:31:14Z")
kevin did u sell the k20 that was in the car?
---
### Author:  [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)
#### Post date: [August 17, 2009, 9:31pm UTC](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177/60 "2009-08-17T21:31:38Z")
anyone??? seriously guys i only need like 2-3 min …murdogg i heard your house leans kinda like a cat in the hat picture leanin
[Previous page](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177.md?page=2)
[Next page](https://forums.speedlife.net/t/6spd-eg-vs-elmal-overpriced-ls-tranny/246177.md?page=4)