# 730whp 460ftlbs @27psi on E98
**URL:** https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808
**Category:** PittSpeed Automotive
**Created:** [May 19, 2009, 9:32am UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808 "2009-05-19T09:32:48Z")
**Posts on this page:** 20
**Page:** 3
### Author:  [@90DSMTurbo](https://forums.speedlife.net/u/90DSMTurbo)
#### Post date: [June 3, 2009, 2:44pm UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/41 "2009-06-03T14:44:07Z")
yea that would be fun always up for a good race :burnout:
---
### Author:  [@pancho](https://forums.speedlife.net/u/pancho)
#### Post date: [June 4, 2009, 12:21pm UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/42 "2009-06-04T12:21:28Z")
baldone, you would have dominated at beaverspring’s annual turbo event last week, just straight fucked faces.
---
### Author:  [@bald1one](https://forums.speedlife.net/u/bald1one)
#### Post date: [June 4, 2009, 3:37pm UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/43 "2009-06-04T15:37:51Z")
> [@Galant VR4 for sale $3500 Queens NY](https://forums.speedlife.net/t/galant-vr4-for-sale-3500-queens-ny/40393/3):
>
> baldone, you would have dominated at beaverspring’s annual turbo event last week, just straight fucked faces.
Ya i was debating on going, once again the whole laziness thing got the best of me. Doesnt look like im going to make the track rental this weekend either ☹ It was a pretty busy week at the shop, and the car developed a boost leak somewhere in the charge pipes while i was beating the piss out of it on route 8 last saturday. It was pretty sketchy to say the least :nuts: I broke loose @110mph on drag radials…hehe :bigok: Im going to try and pressure test them sat morning and do some datalogging to try and figure out what is going on. It is not reaching the target psi charted in my boost tables. Im almost a whole -5psi off of what im supposed to be running. Weird…
---
### Author:  [@bald1one](https://forums.speedlife.net/u/bald1one)
#### Post date: [June 21, 2009, 1:01pm UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/44 "2009-06-21T13:01:20Z")
fixed the boost leak issue, had a pinhole in one of my couplers. anyone have any experience with setting up a wideband and the parimeters for ethanol?
---
### Author:  [@ERABBIT23](https://forums.speedlife.net/u/ERABBIT23)
#### Post date: [June 21, 2009, 6:13pm UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/45 "2009-06-21T18:13:26Z")
> [@what is with all the guns for sale?](https://forums.speedlife.net/t/what-is-with-all-the-guns-for-sale/40417/26):
>
> maybe i can get off my lazy ass and get my car done so we can race 🙂
I am gonna be at the Tuner Challenge Night also. Can I come out and play:blue:
> [@Galant VR4 for sale $3500 Queens NY](https://forums.speedlife.net/t/galant-vr4-for-sale-3500-queens-ny/40393/3):
>
> baldone, you would have dominated at beaverspring’s annual turbo event last week, just straight fucked faces.
Buschurs EVO was there running 9.2’s so I wouldnt say dominated lol
---
### Author:  [@bald1one](https://forums.speedlife.net/u/bald1one)
#### Post date: [June 22, 2009, 9:47am UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/46 "2009-06-22T09:47:30Z")
> [@Washing Car = Close to Sex?](https://forums.speedlife.net/t/washing-car-close-to-sex/40510/24):
>
> I am gonna be at the Tuner Challenge Night also. Can I come out and play:blue:
>
> Buschurs EVO was there running 9.2’s so I wouldnt say dominated lol
you dont count your not a tuner 🙂
ya and me with 0 seat time i would doubt ill even come close to those #'s
---
### Author:  [@90DSMTurbo](https://forums.speedlife.net/u/90DSMTurbo)
#### Post date: [June 27, 2009, 12:19pm UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/47 "2009-06-27T12:19:38Z")
which wideband you using ?
---
### Author:  [@bald1one](https://forums.speedlife.net/u/bald1one)
#### Post date: [June 27, 2009, 2:10pm UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/48 "2009-06-27T14:10:08Z")
> [@Help! Hot Water Tank Problems](https://forums.speedlife.net/t/help-hot-water-tank-problems/40534/2):
>
> which wideband you using ?
aem
---
### Author:  [@90DSMTurbo](https://forums.speedlife.net/u/90DSMTurbo)
#### Post date: [June 28, 2009, 7:34am UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/49 "2009-06-28T07:34:48Z")
there should be a switch on the back and normally the p0 setting on the back of the gauge which will read lambda and then convert it to a a/f ratio from the lambda. Lambda should be universal between any fuel
---
### Author:  [@brokeasskorean](https://forums.speedlife.net/u/brokeasskorean)
#### Post date: [June 28, 2009, 3:57pm UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/50 "2009-06-28T15:57:31Z")
> [@How many vacation days do you get/are you carrying over?](https://forums.speedlife.net/t/how-many-vacation-days-do-you-get-are-you-carrying-over/40504/52):
>
> there should be a switch on the back and normally the p0 setting on the back of the gauge which will read lambda and then convert it to a a/f ratio from the lambda. Lambda should be universal between any fuel
dunno if aem has changed there stuff since i bought one but you either ordered the gauge to read lambda or a/f, you couldnt switch between the two. i used to run a uego
---
### Author:  [@90DSMTurbo](https://forums.speedlife.net/u/90DSMTurbo)
#### Post date: [June 28, 2009, 7:57pm UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/51 "2009-06-28T19:57:16Z")
no your right it only displays a/f or lambda but when in P0 mode it reads lambda from the o2 sensor and converts it to a a/f ratio based on a gasoline table. For example o2 volts is 2.37, lambda is 1.003 which converts to a gasoline a/f of 14.7 and an ethanol a/f of 9.02. So with the aem gauge you always can tune for the desired a/f ratio based upon the gasoline scale since its always just converting this number displayed on the gauge based upon lambda readings. Thanks for catching brokeasskorean that i probably should of explained that one
---
### Author:  [@bald1one](https://forums.speedlife.net/u/bald1one)
#### Post date: [June 29, 2009, 8:21am UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/52 "2009-06-29T08:21:43Z")
thanks guys
---
### Author:  [@LostSolVTEC](https://forums.speedlife.net/u/LostSolVTEC)
#### Post date: [July 20, 2009, 11:24am UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/53 "2009-07-20T11:24:20Z")
when do i get a ride baldy? I’ll hang onto the bars, you don’t need another seat 😃
---
### Author:  [@bald1one](https://forums.speedlife.net/u/bald1one)
#### Post date: [July 20, 2009, 11:52am UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/54 "2009-07-20T11:52:59Z")
actually cage is done, seats are mounted and harness’s are installed. Just need to snip two resistors in my ecu to get the wideband to work with the Hondata then do a couple pulls and email jeff the logs. Should be doing the runs this week sometime if you wanna stop by.
---
### Author:  [@LostSolVTEC](https://forums.speedlife.net/u/LostSolVTEC)
#### Post date: [July 20, 2009, 11:59am UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/55 "2009-07-20T11:59:42Z")
you have a text sir!
---
### Author:  [@bald1one](https://forums.speedlife.net/u/bald1one)
#### Post date: [August 13, 2009, 11:54am UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/56 "2009-08-13T11:54:10Z")
well it looks like my season is over :(…bought a house
---
### Author:  [@69camaro](https://forums.speedlife.net/u/69camaro)
#### Post date: [August 13, 2009, 1:00pm UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/57 "2009-08-13T13:00:21Z")
congrats on the house
---
### Author:  [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)
#### Post date: [August 13, 2009, 1:08pm UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/58 "2009-08-13T13:08:45Z")
congrats on house. you can always come back to your car later
---
### Author:  [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [August 13, 2009, 3:11pm UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/59 "2009-08-13T15:11:45Z")
congrats on house
---
### Author:  [@dyingwish](https://forums.speedlife.net/u/dyingwish)
#### Post date: [August 14, 2009, 4:09am UTC](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808/60 "2009-08-14T04:09:55Z")
Congrats on the house sausagefingers! Welcome to the pit that is called home ownership.
[Previous page](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808.md?page=2)
[Next page](https://forums.speedlife.net/t/730whp-460ftlbs-27psi-on-e98/202808.md?page=4)