# '90 300ZX - Budget "Barbie-Mobile" Build **URL:** \ **Category:** Builds\ **Created:** [March 4, 2013, 12:41pm UTC](https://forums.speedlife.net/t/90-300zx-budget-barbie-mobile-build/229087 "2013-03-04T12:41:21Z")\ **Posts on this page:** 3\ **Page:** 2
**Author:** ![Z31NA2T](https://avatars.discourse-cdn.com/v4/letter/z/e495f1/32.png) [@Z31NA2T](https://forums.speedlife.net/u/Z31NA2T)\ **Post date:** [March 7, 2013, 3:36pm UTC](https://forums.speedlife.net/t/90-300zx-budget-barbie-mobile-build/229087/21 "2013-03-07T15:36:52Z")
> [@Onyx Z32](#): > > Sure you _can_ do it, but the stock MAF isn’t capable of metering that much air after about 500 with the VG30DETT. It’s just not as accurate. And I’m not sure how much air a Z31 motor requires compared to a Z32 motor. > > ---------- Post added at 06:35 PM ---------- Previous post was at 06:34 PM ---------- > > PS, what are you going to do about the front bumper? Cut holes for the intercoolers or get a different bumper? Cutting the ugliest holes I can for now 😛 ---
**Author:** ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)\ **Post date:** [March 7, 2013, 3:37pm UTC](https://forums.speedlife.net/t/90-300zx-budget-barbie-mobile-build/229087/22 "2013-03-07T15:37:45Z")
Haha ok :tup: There are templates out there for cutting the holes I think. You might have to search a bit. ---
**Author:** ![Z31NA2T](https://avatars.discourse-cdn.com/v4/letter/z/e495f1/32.png) [@Z31NA2T](https://forums.speedlife.net/u/Z31NA2T)\ **Post date:** [March 7, 2013, 3:41pm UTC](https://forums.speedlife.net/t/90-300zx-budget-barbie-mobile-build/229087/23 "2013-03-07T15:41:38Z")
> [@Onyx Z32](#): > > Haha ok :tup: > > There are templates out there for cutting the holes I think. You might have to search a bit. I think you missed the “ugliest holes I can” part 😛 [Previous page](https://forums.speedlife.net/t/90-300zx-budget-barbie-mobile-build/229087.md?page=1)