# '90 Civic Si Info...

**URL:** https://forums.speedlife.net/t/90-civic-si-info/189054
**Category:** PittSpeed Automotive
**Created:** [April 5, 2007, 11:48am UTC](https://forums.speedlife.net/t/90-civic-si-info/189054 "2007-04-05T11:48:10Z")
**Posts on this page:** 1
**Showing post:** 2

<div class="post-metadata">

### Author: ![SlowCivic](https://avatars.discourse-cdn.com/v4/letter/s/9f8e36/32.png) [@SlowCivic](https://forums.speedlife.net/u/SlowCivic)
#### Post date: [April 5, 2007, 1:23pm UTC](https://forums.speedlife.net/t/90-civic-si-info/189054/2 "2007-04-05T13:23:46Z")

</div>

> [@Today's Cruise with Pics....](https://forums.speedlife.net/t/todays-cruise-with-pics/29246/30):
>
> …I’m going to look at a '90 Si next week and want to know what I should be checking for? What are known problem areas? Suspension peices that fail? Any susp. mounting points or other structural issues that I should know about?
> 
> -TJ

Fairly good unibody around the suspension so usually that is ok. The bushings may need replaced and if you switch shocks the rear bolts like to break. Other than that check for rust or rot on the rocker panels below the doors and rear quarters like to fall apart. That is the chassis i used for my 500 whp drag car and never replaced any bushings and it was tight as new. Best of luck :bigthumb:

---

_[View the full topic](https://forums.speedlife.net/t/90-civic-si-info/189054)._