# 92 nissan nx motor swap **URL:** \ **Category:** Canada Nissan Automotive\ **Created:** [December 12, 2004, 2:58am UTC](https://forums.speedlife.net/t/92-nissan-nx-motor-swap/138135 "2004-12-12T02:58:43Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![nismokutz](https://avatars.discourse-cdn.com/v4/letter/n/977dab/32.png) [@nismokutz](https://forums.speedlife.net/u/nismokutz)\ **Post date:** [December 12, 2004, 2:58am UTC](https://forums.speedlife.net/t/92-nissan-nx-motor-swap/138135/1 "2004-12-12T02:58:43Z")
hey, i have a 92 nissan nx and i want to do a motor swap. or find out wut the best route is.i only have the 1.6l ☹ . i was thinkin of the sr20det bluebird. but any suggestions would be great. thx ---
**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\ **Post date:** [December 12, 2004, 3:27am UTC](https://forums.speedlife.net/t/92-nissan-nx-motor-swap/138135/2 "2004-12-12T03:27:48Z")
Give Niel at Speedworks a call. I think they have a fwd SR20det sitting at the shop. [http://www.n-e-c-c.com/forum/viewtopic.php?t=397](http://www.n-e-c-c.com/forum/viewtopic.php?t=397) ---
**Author:** ![imported\_Madmax1](https://avatars.discourse-cdn.com/v4/letter/i/3da27b/32.png) [@imported\_Madmax1](https://forums.speedlife.net/u/imported_Madmax1)\ **Post date:** [December 12, 2004, 11:19am UTC](https://forums.speedlife.net/t/92-nissan-nx-motor-swap/138135/3 "2004-12-12T11:19:52Z")
To swapn an SR20DET into a car that came with the 1.6L is a lot of work. First of you’ll have to find a tranny and axle and all that crap from an NX2000/200SX SER 95-97/INfiniti G20. That’s just the start of it. THen you’ll need someone to do the harness so everything in the car works. Then you’ll have to either get an Greddy emanage or an Apexi S-AFC. Or you can just send your computer to JIm Wolf Tech. It’s going to cost you a lot of money, but that would be a fun project to do and you’ll have a super fast car. Or you could just turbo you 1.6L. Gives you great number and it’s a lot easier to do. Max ---
**Author:** ![SPEEDWORKS](https://avatars.discourse-cdn.com/v4/letter/s/e480ec/32.png) [@SPEEDWORKS](https://forums.speedlife.net/u/SPEEDWORKS)\ **Post date:** [December 13, 2004, 6:54pm UTC](https://forums.speedlife.net/t/92-nissan-nx-motor-swap/138135/4 "2004-12-13T18:54:00Z")
just so that you know, we now have 2 FWD sr20de transmissions, axel sets, mounts etc. we can also get all the necessary mounts to convert from 1.6 --\> sr and they are quite inexpensive. we also have one bluebird sss sr20det instock with full harness and ecu that we ran while it was still in the half cut. The FWD conversion from 1.6 to sr20 is very popular in the states and we knew it is just a matter of time before it catches on here. Give me a call if you want prices or to discuss the options. Neil. ---
**Author:** ![nismokutz](https://avatars.discourse-cdn.com/v4/letter/n/977dab/32.png) [@nismokutz](https://forums.speedlife.net/u/nismokutz)\ **Post date:** [December 14, 2004, 6:10pm UTC](https://forums.speedlife.net/t/92-nissan-nx-motor-swap/138135/5 "2004-12-14T18:10:14Z")
will axels from a ga16de nx fit when i do a sr20det motor swap? ---
**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\ **Post date:** [December 14, 2004, 7:53pm UTC](https://forums.speedlife.net/t/92-nissan-nx-motor-swap/138135/6 "2004-12-14T19:53:45Z")
Don’t think so. ---
**Author:** ![nismokutz](https://avatars.discourse-cdn.com/v4/letter/n/977dab/32.png) [@nismokutz](https://forums.speedlife.net/u/nismokutz)\ **Post date:** [December 14, 2004, 8:19pm UTC](https://forums.speedlife.net/t/92-nissan-nx-motor-swap/138135/7 "2004-12-14T20:19:11Z")
how about axels from a sentra sr20de? ---
**Author:** ![imported\_Madmax1](https://avatars.discourse-cdn.com/v4/letter/i/3da27b/32.png) [@imported\_Madmax1](https://forums.speedlife.net/u/imported_Madmax1)\ **Post date:** [December 14, 2004, 8:29pm UTC](https://forums.speedlife.net/t/92-nissan-nx-motor-swap/138135/8 "2004-12-14T20:29:30Z")
Yeah that would fit. ---
**Author:** ![nismokutz](https://avatars.discourse-cdn.com/v4/letter/n/977dab/32.png) [@nismokutz](https://forums.speedlife.net/u/nismokutz)\ **Post date:** [December 15, 2004, 11:18pm UTC](https://forums.speedlife.net/t/92-nissan-nx-motor-swap/138135/9 "2004-12-15T23:18:56Z")
also i am redoing my front end and i was wonderin on my 92 nx when i take my rad support off then put a new one on does it have to be spot welded or does it just bolt back on? thx ---
**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\ **Post date:** [December 16, 2004, 1:31am UTC](https://forums.speedlife.net/t/92-nissan-nx-motor-swap/138135/10 "2004-12-16T01:31:01Z")
Was the old one spot welded back on? You should be able to just bolt it up. ---
**Author:** ![nismokutz](https://avatars.discourse-cdn.com/v4/letter/n/977dab/32.png) [@nismokutz](https://forums.speedlife.net/u/nismokutz)\ **Post date:** [December 16, 2004, 2:04am UTC](https://forums.speedlife.net/t/92-nissan-nx-motor-swap/138135/11 "2004-12-16T02:04:37Z")
don’t know if its spot welded on yet. i haven’t taken it off yet. i hope it doesn’t have to be spot welded. how about lowering springs for my nx? r they the same as any other nissans? sentra maybe? cause i want sum and they seem to be hard to find for the nx ---
**Author:** ![DeathBy240](https://avatars.discourse-cdn.com/v4/letter/d/258eb7/32.png) [@DeathBy240](https://forums.speedlife.net/u/DeathBy240)\ **Post date:** [December 16, 2004, 7:55am UTC](https://forums.speedlife.net/t/92-nissan-nx-motor-swap/138135/12 "2004-12-16T07:55:20Z")
The rad is just bolted on. It should only take a few minutes to remove/replace it. ---
**Author:** ![mscott](https://avatars.discourse-cdn.com/v4/letter/m/3ab097/32.png) [@mscott](https://forums.speedlife.net/u/mscott)\ **Post date:** [December 18, 2004, 11:00am UTC](https://forums.speedlife.net/t/92-nissan-nx-motor-swap/138135/13 "2004-12-18T11:00:21Z")
[http://www.sr20forum.com/showthread.php?t=87887&highlight=BB+ecu+us\*](http://www.sr20forum.com/showthread.php?t=87887&highlight=BB+ecu+us%2A) ---
**Author:** ![nismokutz](https://avatars.discourse-cdn.com/v4/letter/n/977dab/32.png) [@nismokutz](https://forums.speedlife.net/u/nismokutz)\ **Post date:** [December 21, 2004, 12:01pm UTC](https://forums.speedlife.net/t/92-nissan-nx-motor-swap/138135/14 "2004-12-21T12:01:23Z")
well i finished my front end, i put on the new rad support, left fender and bumper and it looks great. the rad support was welded all over. i just bolted it back on for now. next project. the sr20det motor swap. ---
**Author:** ![nismokutz](https://avatars.discourse-cdn.com/v4/letter/n/977dab/32.png) [@nismokutz](https://forums.speedlife.net/u/nismokutz)\ **Post date:** [December 23, 2004, 7:18pm UTC](https://forums.speedlife.net/t/92-nissan-nx-motor-swap/138135/15 "2004-12-23T19:18:43Z")
here is sum pics during the tear down and puttin back together of my front end. and the rad support was welded all over. it took me a day to get the rad support off. > **[Dolo187's Profile in Duluth, GA - CarDomain.com](http://www.cardomain.com/member/dolo187/)** > > Check out the Dolo187 in Duluth, GA profile page and follow Dolo187's rides 2000 Nissan Maxima at CarDomain.com ---
**Author:** ![SRBURG13](https://avatars.discourse-cdn.com/v4/letter/s/9fc29f/32.png) [@SRBURG13](https://forums.speedlife.net/u/SRBURG13)\ **Post date:** [December 24, 2004, 11:02am UTC](https://forums.speedlife.net/t/92-nissan-nx-motor-swap/138135/16 "2004-12-24T11:02:48Z")
Looks good! Pretty dark in that garage. lol