# 96 accord fuel pressure sensor question

**URL:** <https://forums.speedlife.net/t/96-accord-fuel-pressure-sensor-question/204051>\
**Category:** PittSpeed Automotive\
**Created:** [October 29, 2009, 6:37pm UTC](https://forums.speedlife.net/t/96-accord-fuel-pressure-sensor-question/204051 "2009-10-29T18:37:48Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Heart4Audio](https://avatars.discourse-cdn.com/v4/letter/h/d9b06d/32.png) [@Heart4Audio](https://forums.speedlife.net/u/Heart4Audio)\
**Post date:** [October 29, 2009, 6:37pm UTC](https://forums.speedlife.net/t/96-accord-fuel-pressure-sensor-question/204051/1 "2009-10-29T18:37:48Z")

</div>

Assuming you have an answer, I have a question. What kind of voltage would a fuel pressure sensor send to an ecu? perhaps i have a fps code and I don’t have the actual sensor but I need to put the voltage to the ecu…what would said voltage be? I don’t particularly care about a full tank of gas, but I for sure don’t want the voltage for an empty one. If anybody can help I would greatly appreciate it.

---

<div class="post-metadata">

**Author:** ![99345hp](https://avatars.discourse-cdn.com/v4/letter/9/34f0e0/32.png) [@99345hp](https://forums.speedlife.net/u/99345hp)\
**Post date:** [November 2, 2009, 5:04pm UTC](https://forums.speedlife.net/t/96-accord-fuel-pressure-sensor-question/204051/2 "2009-11-02T17:04:00Z")

</div>

Fuel pressure sensor or fuel level sensor? You asked about fuel pressure, but then start talking about fuel level. The fuel level sensor is done by ohms not volts I believe. Fuel pressure sensor voltage? Im not positive, but I can look on my vantage tomorrow at work and see what it says the ecm should be seeing.

---

<div class="post-metadata">

**Author:** ![Heart4Audio](https://avatars.discourse-cdn.com/v4/letter/h/d9b06d/32.png) [@Heart4Audio](https://forums.speedlife.net/u/Heart4Audio)\
**Post date:** [November 4, 2009, 4:05pm UTC](https://forums.speedlife.net/t/96-accord-fuel-pressure-sensor-question/204051/3 "2009-11-04T16:05:43Z")

</div>

Yes, sorry that was confusing. I would like to know the pressure voltage or resistance or whatnot

---

<div class="post-metadata">

**Author:** ![fmfkid250](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/fmfkid250/32/5973_2.png) [@fmfkid250](https://forums.speedlife.net/u/fmfkid250)\
**Post date:** [November 4, 2009, 5:13pm UTC](https://forums.speedlife.net/t/96-accord-fuel-pressure-sensor-question/204051/4 "2009-11-04T17:13:19Z")

</div>

its a resistance. When I get a chance I will put my meter on it an d see what it is.

Full - 2-5ohms  
Empty - 105-110 ohms

a 50 ohm resistor will be in the middle

---

<div class="post-metadata">

**Author:** ![Heart4Audio](https://avatars.discourse-cdn.com/v4/letter/h/d9b06d/32.png) [@Heart4Audio](https://forums.speedlife.net/u/Heart4Audio)\
**Post date:** [November 5, 2009, 5:57pm UTC](https://forums.speedlife.net/t/96-accord-fuel-pressure-sensor-question/204051/5 "2009-11-05T17:57:49Z")

</div>

awesome. thank you. I hope this will resolve a couple of my issues or at least get me closer to the end.