# 99 accord clutch install = WTH! **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [November 4, 2013, 10:02am UTC](https://forums.speedlife.net/t/99-accord-clutch-install-wth/233660 "2013-11-04T10:02:31Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![rugsr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rugsr/32/7474_2.png) [@rugsr](https://forums.speedlife.net/u/rugsr)\ **Post date:** [November 4, 2013, 10:02am UTC](https://forums.speedlife.net/t/99-accord-clutch-install-wth/233660/1 "2013-11-04T10:02:31Z")
SO my brother and I got pretty far with the install and came to a fork in the road. With everything almost apart it looks like the tranny wont lower unless you drop the sub frame. We havent read this anywhere but the dealer says you have to drop the subframe. 2 questions…(1)Has anyone done a clutch on a 98-02 accord and kept the sub frame in place? (2) Can you remove the tranny to get to the clutch by just removing the passenger axle? Thanks ---
**Author:** ![GV1390](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gv1390/32/5432_2.png) [@GV1390](https://forums.speedlife.net/u/GV1390)\ **Post date:** [November 4, 2013, 10:04am UTC](https://forums.speedlife.net/t/99-accord-clutch-install-wth/233660/2 "2013-11-04T10:04:04Z")
Just give up on cars dude, lol. ---
**Author:** ![tpgsr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tpgsr/32/7374_2.png) [@tpgsr](https://forums.speedlife.net/u/tpgsr)\ **Post date:** [November 4, 2013, 10:32am UTC](https://forums.speedlife.net/t/99-accord-clutch-install-wth/233660/3 "2013-11-04T10:32:56Z")
It is just a clutch… Can you move the transmission back at all or just lift the motor a bit to create a workable gap? you only need a few inches to get the old one out and the new one in. ---
**Author:** ![rugsr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rugsr/32/7474_2.png) [@rugsr](https://forums.speedlife.net/u/rugsr)\ **Post date:** [November 4, 2013, 10:41am UTC](https://forums.speedlife.net/t/99-accord-clutch-install-wth/233660/4 "2013-11-04T10:41:57Z")
> [@GV1390](#): > > Just give up on cars dude, lol. lol you sound like my wife - - - Updated - - - > [@tpgsr](#): > > It is just a clutch… Can you move the transmission back at all or just lift the motor a bit to create a workable gap? you only need a few inches to get the old one out and the new one in. Its really tight in there…I dont think moving it back a few inches is going to give you enough room ---
**Author:** ![tpgsr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tpgsr/32/7374_2.png) [@tpgsr](https://forums.speedlife.net/u/tpgsr)\ **Post date:** [November 4, 2013, 10:43am UTC](https://forums.speedlife.net/t/99-accord-clutch-install-wth/233660/5 "2013-11-04T10:43:07Z")
what about lifting the motor a bit so that it creates separation? I only ask because I have used this method in the past on a car that was nearly impossible to get the clutch out of. ---
**Author:** ![HouseS2K](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/houses2k/32/100273_2.png) [@HouseS2K](https://forums.speedlife.net/u/HouseS2K)\ **Post date:** [November 4, 2013, 10:51am UTC](https://forums.speedlife.net/t/99-accord-clutch-install-wth/233660/6 "2013-11-04T10:51:30Z")
You don’t remove subframe, you just loosen it, remove passenger side subframe bolts and loosen drive side enough for it to drop down about 4-5 inches this will allow engine to drop down and u can pull tranny away from engine thru passenger wheel-well. Hope this helps. Sent from my iPhone 5 ---
**Author:** ![rugsr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rugsr/32/7474_2.png) [@rugsr](https://forums.speedlife.net/u/rugsr)\ **Post date:** [November 4, 2013, 11:00am UTC](https://forums.speedlife.net/t/99-accord-clutch-install-wth/233660/7 "2013-11-04T11:00:02Z")
Thanks for the info^ I should probably add im doing this on the ground and not on a lift - - - Updated - - - > [@tpgsr](#): > > what about lifting the motor a bit so that it creates separation? I only ask because I have used this method in the past on a car that was nearly impossible to get the clutch out of. Hmmm well that might be possible but I dont have a picker ---
**Author:** ![1QIKZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1qikz/32/6112_2.png) [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)\ **Post date:** [November 4, 2013, 11:34am UTC](https://forums.speedlife.net/t/99-accord-clutch-install-wth/233660/8 "2013-11-04T11:34:57Z")
Who needs a lift…seriously, are you 65? ---
**Author:** ![bracketracer](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bracketracer/32/15592_2.png) [@bracketracer](https://forums.speedlife.net/u/bracketracer)\ **Post date:** [November 4, 2013, 12:43pm UTC](https://forums.speedlife.net/t/99-accord-clutch-install-wth/233660/9 "2013-11-04T12:43:38Z")
> [@1QIKZ](#): > > Who needs a lift…seriously, are you 65? hey! ---
**Author:** ![rugsr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rugsr/32/7474_2.png) [@rugsr](https://forums.speedlife.net/u/rugsr)\ **Post date:** [November 4, 2013, 12:58pm UTC](https://forums.speedlife.net/t/99-accord-clutch-install-wth/233660/10 "2013-11-04T12:58:13Z")
No…75 ---
**Author:** ![HouseS2K](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/houses2k/32/100273_2.png) [@HouseS2K](https://forums.speedlife.net/u/HouseS2K)\ **Post date:** [November 4, 2013, 2:07pm UTC](https://forums.speedlife.net/t/99-accord-clutch-install-wth/233660/11 "2013-11-04T14:07:16Z")
> [@rugsr](#): > > Thanks for the info^ > > I should probably add im doing this on the ground and not on a lift > > - > - > - Updated - - - > > Hmmm well that might be possible but I dont have a picker I did my integra clutch on my back as well , it sux Sent from my iPhone 5 ---
**Author:** ![GV1390](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gv1390/32/5432_2.png) [@GV1390](https://forums.speedlife.net/u/GV1390)\ **Post date:** [November 4, 2013, 4:58pm UTC](https://forums.speedlife.net/t/99-accord-clutch-install-wth/233660/12 "2013-11-04T16:58:10Z")
Breetime and myself swapped my old Integra trans on the ground with no power tools in an hour and a half. ---
**Author:** ![BREETIME](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/breetime/32/5214_2.png) [@BREETIME](https://forums.speedlife.net/u/BREETIME)\ **Post date:** [November 4, 2013, 5:19pm UTC](https://forums.speedlife.net/t/99-accord-clutch-install-wth/233660/13 "2013-11-04T17:19:32Z")
> [@GV1390](#): > > Breetime and myself swapped my old Integra trans on the ground with no power tools in an hour and a half. Did that shit live. ---
**Author:** ![1QIKZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1qikz/32/6112_2.png) [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)\ **Post date:** [November 4, 2013, 5:51pm UTC](https://forums.speedlife.net/t/99-accord-clutch-install-wth/233660/14 "2013-11-04T17:51:39Z")
> [@bracketracer](#): > > hey! Just messin. Don’t think I’d ever want to go back to the non-lift days. ---
**Author:** ![GV1390](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gv1390/32/5432_2.png) [@GV1390](https://forums.speedlife.net/u/GV1390)\ **Post date:** [November 4, 2013, 7:03pm UTC](https://forums.speedlife.net/t/99-accord-clutch-install-wth/233660/15 "2013-11-04T19:03:41Z")
> [@BREETIME](#): > > Did that shit live. ---
**Author:** ![rugsr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rugsr/32/7474_2.png) [@rugsr](https://forums.speedlife.net/u/rugsr)\ **Post date:** [November 5, 2013, 5:30am UTC](https://forums.speedlife.net/t/99-accord-clutch-install-wth/233660/16 "2013-11-05T05:30:13Z")
99\_civic\_si helped me with my GSR clutch years ago on our backs on pavement. But with tegs/civic its pretty “easy”. Im not saying this accord is impossible, but its a lot more work then I was thinking. I found a step by step for these accord years (wish I had it last week) and Ill post it later for those interested.