# Adjusting ride height

**URL:** https://forums.speedlife.net/t/adjusting-ride-height/147154
**Category:** Canada Nissan Automotive
**Created:** [June 20, 2007, 9:00pm UTC](https://forums.speedlife.net/t/adjusting-ride-height/147154 "2007-06-20T21:00:29Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![Impact\_Blue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/impact_blue/32/5807_2.png) [@Impact\_Blue](https://forums.speedlife.net/u/Impact_Blue)
#### Post date: [June 20, 2007, 9:00pm UTC](https://forums.speedlife.net/t/adjusting-ride-height/147154/1 "2007-06-20T21:00:29Z")

</div>

So I’m adjusting my ride height and when I measure from the ground to the top of the wheel well the right front is 25" and the left front is 26.5" but when I take the wheels off and measure the collars on the coilover it’s 1.75" on both the left and the right…

If I adjust the left side down to 1.4" from the collars then the ride height from the floor to the top of the wheel well are the same, so if I have it 1.75 on the right and 1.4" on the left would that effect anything other than ride height?

Off the record because I’m so damn picky is that the left rear is .2" higher than the right rear so I’m guessing if the front comes down then the back will too…

---

<div class="post-metadata">

### Author: ![Jason\_Lange](https://avatars.discourse-cdn.com/v4/letter/j/65b543/32.png) [@Jason\_Lange](https://forums.speedlife.net/u/Jason_Lange)
#### Post date: [June 20, 2007, 11:34pm UTC](https://forums.speedlife.net/t/adjusting-ride-height/147154/2 "2007-06-20T23:34:39Z")

</div>

Are you on level ground?

---

<div class="post-metadata">

### Author: ![Impact\_Blue](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/impact_blue/32/5807_2.png) [@Impact\_Blue](https://forums.speedlife.net/u/Impact_Blue)
#### Post date: [June 21, 2007, 8:29am UTC](https://forums.speedlife.net/t/adjusting-ride-height/147154/3 "2007-06-21T08:29:41Z")

</div>

yes, I drove around for about half an hour to see if it will settle in, going over bumps and so on and so forth and hasn’t really budged, I’m going to adjust it today down to 1.4" and go from there
