# AEM wideband help **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [October 30, 2009, 8:40pm UTC](https://forums.speedlife.net/t/aem-wideband-help/204059 "2009-10-30T20:40:29Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![bald1one](https://avatars.discourse-cdn.com/v4/letter/b/9de053/32.png) [@bald1one](https://forums.speedlife.net/u/bald1one)\ **Post date:** [October 31, 2009, 7:20am UTC](https://forums.speedlife.net/t/aem-wideband-help/204059/2 "2009-10-31T07:20:45Z")
> [@Took some pics of the Trans Am today....](https://forums.speedlife.net/t/took-some-pics-of-the-trans-am-today/41458/13): > > AEM UEGO, AMS EMS powered car. Sensor in question was put very close to turbine outlet, maybe 12-15". > > Worked “ok” when I bought the car - gauge would read normally, but sometimes freeze at random AFR’s. It would cycle, and then hit 15.8 (for example) and not move until I stopped the car, let it cool a bit, and turn it back on. I thought the sensor was dying so I tested it per AEM’s YouTube how-to (exposing it to no exhaust pegs it lean, placing it in a rag sprayed with brake cleaner pegs it rich) and it tested fine. > > I took the downpipe out to try and find an oil leak, and had to unplug the sensor from the harness. I noticed he had a zip tie holding the two ends together, since the clip on the harness end was broken. The zip tie was “crushing” one of the wires. When I reassembled everything, I didn’t include a zip tie. Ever since then, the gauge just reads 14.7/14.8, and never moves. The sensor does not warm up. > > I figured the sensor died, so I bought a new one, same part number. Plugged it in, still would not warm up and cycle (out of the car, not running. Should peg lean after a bit.) Tried the old sensor again, nothing. I checked the sensor/harness connected a million times, tried making sure it was pushed in the whole way, etc, nothing. Took the gauge cluster out (wideband gauge is mounted in gauge cluster) to check connection on back of gauge, it seems fine. I cut back a bit of the wire sheath where it was crushed, thinking the connection was severed, but it looks 100%. > > Any suggestions other than “buy a real wideband?” I have had nothing but problems as well with my AEM. Im thinking about ditching it. --- _[View the full topic](https://forums.speedlife.net/t/aem-wideband-help/204059)._