# Aerocatch Hoodpin install **URL:** \ **Category:** SON240sx Automotive\ **Created:** [April 8, 2009, 9:36pm UTC](https://forums.speedlife.net/t/aerocatch-hoodpin-install/123366 "2009-04-08T21:36:28Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![GTS](https://avatars.discourse-cdn.com/v4/letter/g/82dd89/32.png) [@GTS](https://forums.speedlife.net/u/GTS)\ **Post date:** [April 8, 2009, 9:36pm UTC](https://forums.speedlife.net/t/aerocatch-hoodpin-install/123366/1 "2009-04-08T21:36:28Z")
Anyone installed these before? Any tips before I go cutting into my hood? ---
**Author:** ![jlee](https://avatars.discourse-cdn.com/v4/letter/j/898d66/32.png) [@jlee](https://forums.speedlife.net/u/jlee)\ **Post date:** [April 8, 2009, 10:49pm UTC](https://forums.speedlife.net/t/aerocatch-hoodpin-install/123366/2 "2009-04-08T22:49:01Z")
here’s a tip, it’s fairly simple… seek a professional… haha ---
**Author:** ![GTS](https://avatars.discourse-cdn.com/v4/letter/g/82dd89/32.png) [@GTS](https://forums.speedlife.net/u/GTS)\ **Post date:** [April 9, 2009, 5:50am UTC](https://forums.speedlife.net/t/aerocatch-hoodpin-install/123366/3 "2009-04-09T05:50:35Z")
Anyone else with some more useful advice? ---
**Author:** ![tatti](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/tatti/32/5742_2.png) [@tatti](https://forums.speedlife.net/u/tatti)\ **Post date:** [April 9, 2009, 6:11am UTC](https://forums.speedlife.net/t/aerocatch-hoodpin-install/123366/4 "2009-04-09T06:11:19Z")
Google? ---
**Author:** ![JamesS](https://avatars.discourse-cdn.com/v4/letter/j/87869e/32.png) [@JamesS](https://forums.speedlife.net/u/JamesS)\ **Post date:** [April 9, 2009, 6:11am UTC](https://forums.speedlife.net/t/aerocatch-hoodpin-install/123366/5 "2009-04-09T06:11:32Z")
The pins should come with some fairly good instructions. If you do not have them for whatever reason, they are on the website [http://www.aerocatch.com/category\_sublist.php?catid=157&colorid=1&procatid=163](http://www.aerocatch.com/category_sublist.php?catid=157&colorid=1&procatid=163) All I can say really is check and re check your measurements before drilling or cutting 🙂 ---
**Author:** ![jlee](https://avatars.discourse-cdn.com/v4/letter/j/898d66/32.png) [@jlee](https://forums.speedlife.net/u/jlee)\ **Post date:** [April 9, 2009, 8:00am UTC](https://forums.speedlife.net/t/aerocatch-hoodpin-install/123366/6 "2009-04-09T08:00:39Z")
i think my advice was the most useful… but on a serious note… here’s what you do. you take the stencil and just sorta eye ball it… and start cutting away. as i always say cut twice don’t measure. good luck man! edit: ok but seriously, i believe sky14 had his installed by Original drift master. Maybe pm him and see if he can do it for ya? ---
**Author:** ![DJPyro](https://avatars.discourse-cdn.com/v4/letter/d/278dde/32.png) [@DJPyro](https://forums.speedlife.net/u/DJPyro)\ **Post date:** [April 9, 2009, 9:17am UTC](https://forums.speedlife.net/t/aerocatch-hoodpin-install/123366/7 "2009-04-09T09:17:52Z")
Talk to Sasha, he’s run them on both his S14 and his 350. ---
**Author:** ![Ciaran](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ciaran/32/5612_2.png) [@Ciaran](https://forums.speedlife.net/u/Ciaran)\ **Post date:** [April 9, 2009, 9:21am UTC](https://forums.speedlife.net/t/aerocatch-hoodpin-install/123366/8 "2009-04-09T09:21:23Z")
there was just an article in the latest turbo mag i believe. really good write up. ---
**Author:** ![Soulitude](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/soulitude/32/5644_2.png) [@Soulitude](https://forums.speedlife.net/u/Soulitude)\ **Post date:** [April 10, 2009, 9:22am UTC](https://forums.speedlife.net/t/aerocatch-hoodpin-install/123366/9 "2009-04-10T09:22:42Z")
I’ll do it for ya sam, its easy…i just need very big hammer, if i miss, no worries, you got a nice open vent for intake 😃