# AFR heads in the Mail

**URL:** <https://forums.speedlife.net/t/afr-heads-in-the-mail/175628>\
**Category:** PittSpeed Automotive\
**Created:** [July 14, 2005, 3:54pm UTC](https://forums.speedlife.net/t/afr-heads-in-the-mail/175628 "2005-07-14T15:54:23Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![MONTE\_SS](https://avatars.discourse-cdn.com/v4/letter/m/8797f3/32.png) [@MONTE\_SS](https://forums.speedlife.net/u/MONTE_SS)\
**Post date:** [July 14, 2005, 3:54pm UTC](https://forums.speedlife.net/t/afr-heads-in-the-mail/175628/1 "2005-07-14T15:54:23Z")

</div>

Bought a set of AFR 227 comp. machined heads, and a set of 215 rasied runner, anyone run these heads.  
Looking to flow little more then dart heads. Running 700 lift cam 1071 blower .

Or any suggestions on Canfeilds, Brodix, Edelbrock.

---

<div class="post-metadata">

**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\
**Post date:** [July 14, 2005, 6:24pm UTC](https://forums.speedlife.net/t/afr-heads-in-the-mail/175628/2 "2005-07-14T18:24:32Z")

</div>

are you selling any sbc heads?

---

<div class="post-metadata">

**Author:** ![MONTE\_SS](https://avatars.discourse-cdn.com/v4/letter/m/8797f3/32.png) [@MONTE\_SS](https://forums.speedlife.net/u/MONTE_SS)\
**Post date:** [July 15, 2005, 9:53am UTC](https://forums.speedlife.net/t/afr-heads-in-the-mail/175628/3 "2005-07-15T09:53:18Z")

</div>

I have a set of zz4 813’s and I will sell the set thats on the motor now dart alum. 2.08/1.6 ported and polished 6 angle valve job handled 1400hp on the dyno papers to back it. The heads im looking at are 2.100/1.6 raised runner I think im going with. I also have cast 2.02 world products, and crate fastburn 385 2.02/1.6 heads.

---

<div class="post-metadata">

**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\
**Post date:** [July 15, 2005, 2:35pm UTC](https://forums.speedlife.net/t/afr-heads-in-the-mail/175628/4 "2005-07-15T14:35:33Z")

</div>

> [@montekass](#):
>
> I have a set of zz4 813’s and I will sell the set thats on the motor now dart alum. 2.08/1.6 ported and polished 6 angle valve job handled 1400hp on the dyno papers to back it. The heads im looking at are 2.100/1.6 raised runner I think im going with. I also have cast 2.02 world products, and crate fastburn 385 2.02/1.6 heads.

give me prices. i have vortec heads now, but i may get rid of them