# Aftermarket Skyline/S chassis/Engine management/Lots more

**URL:** <https://forums.speedlife.net/t/aftermarket-skyline-s-chassis-engine-management-lots-more/207879>\
**Category:** Classifieds\
**Created:** [January 5, 2011, 2:56pm UTC](https://forums.speedlife.net/t/aftermarket-skyline-s-chassis-engine-management-lots-more/207879 "2011-01-05T14:56:55Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Noga](https://avatars.discourse-cdn.com/v4/letter/n/f19dbf/32.png) [@Noga](https://forums.speedlife.net/u/Noga)\
**Post date:** [January 5, 2011, 2:56pm UTC](https://forums.speedlife.net/t/aftermarket-skyline-s-chassis-engine-management-lots-more/207879/1 "2011-01-05T14:56:55Z")

</div>

All parts are brand new except for the Oil filter relocation which I purchased off another member. All parts were purchased for a R33 GTR however almost everything is interchangeable or a universal kit. All parts are located in Mississauga, Ontario. Will ship at buyers expense anywhere.

PM me here  
Email me at kylenoga@yahoo.ca  
If your local call me 647 992 6642

Mishimoto Oil cooler kit - Brand new $220

Greddy Oil filter relocation kit used(Small twist in one line) - $110

Garrett GT3582R .82 - Brand new - $1400

HKS Step 2 Valve springs(R33/32) - Brand new $380

ARP Headstuds(R33/32) - Brand new $300

cometic HG(R33/32) - Brand new $110

AEM Ems Series 2 Nissan(Works on all RB series/VG/SR/Ect) - Brand new $1600  
AEM Boost control solenoid - Brand new $100  
Both Ems + Solenoid for $1650

OEM Hanger bearing R33 GTR(May work on 32) - Brand new $45

OEM Slave cylinder GTR - Brand new $ 90

Walboro Fuel pump + filter and install kit - Brand New $100

ARC Titanium Rad cooling panel R33 GTR - Brand New $220

---

<div class="post-metadata">

**Author:** ![DirrtyDevo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dirrtydevo/32/5547_2.png) [@DirrtyDevo](https://forums.speedlife.net/u/DirrtyDevo)\
**Post date:** [January 5, 2011, 7:29pm UTC](https://forums.speedlife.net/t/aftermarket-skyline-s-chassis-engine-management-lots-more/207879/2 "2011-01-05T19:29:50Z")

</div>

I have the grex oil filter relocation(likely the same fittings etc as yours) and am interested in the oil cooler kit only if I can use the hardware/adaptor from both kits to work together.

Could you PM me or leave a line here if your two kits will work together?

---

<div class="post-metadata">

**Author:** ![Noga](https://avatars.discourse-cdn.com/v4/letter/n/f19dbf/32.png) [@Noga](https://forums.speedlife.net/u/Noga)\
**Post date:** [January 6, 2011, 8:30am UTC](https://forums.speedlife.net/t/aftermarket-skyline-s-chassis-engine-management-lots-more/207879/3 "2011-01-06T08:30:09Z")

</div>

I don’t see it being an issue though the oil cooler kit is brand new so I obviously haven’t tested. If worse came to worse you would need to either buy 1 adapter fitting to go between the two. Most likely they are the same size.

---

<div class="post-metadata">

**Author:** ![prozac3ne2nr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/prozac3ne2nr/32/5581_2.png) [@prozac3ne2nr](https://forums.speedlife.net/u/prozac3ne2nr)\
**Post date:** [January 6, 2011, 8:37am UTC](https://forums.speedlife.net/t/aftermarket-skyline-s-chassis-engine-management-lots-more/207879/4 "2011-01-06T08:37:00Z")

</div>

The Grex relocation kit doesn’t use AN fittings and lines right, what does the Mishimoto use?

---

<div class="post-metadata">

**Author:** ![Noga](https://avatars.discourse-cdn.com/v4/letter/n/f19dbf/32.png) [@Noga](https://forums.speedlife.net/u/Noga)\
**Post date:** [January 6, 2011, 9:50am UTC](https://forums.speedlife.net/t/aftermarket-skyline-s-chassis-engine-management-lots-more/207879/5 "2011-01-06T09:50:57Z")

</div>

> [@prozac3ne2nr](#):
>
> The Grex relocation kit doesn’t use AN fittings and lines right, what does the Mishimoto use?

> **[10-Row Universal Oil Cooler Kit](https://www.mishimoto.com/mishimoto-universal-oil-cooler-kit.html)**
>
> Proper oil temperature regulation is key to extending and preserving the life of your stock or high performance engine. Keep your temperatures in check with the Mishimoto universal oil cooler kit. This kit is applicable for most vehicles and includes...

Heres a link for you

It uses 10/8 AN fittings

---

<div class="post-metadata">

**Author:** ![prozac3ne2nr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/prozac3ne2nr/32/5581_2.png) [@prozac3ne2nr](https://forums.speedlife.net/u/prozac3ne2nr)\
**Post date:** [January 6, 2011, 10:22am UTC](https://forums.speedlife.net/t/aftermarket-skyline-s-chassis-engine-management-lots-more/207879/6 "2011-01-06T10:22:39Z")

</div>

Wish that ARC panel was for an S14. sigh. Good price too.
