# Albany Speed Shop / Krazy Kid Kustoms 2004 Jetta Track Car **URL:** \ **Category:** Builds\ **Created:** [September 1, 2010, 6:52am UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265 "2010-09-01T06:52:49Z")\ **Posts on this page:** 20\ **Page:** 24
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [March 9, 2011, 5:50am UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/461 "2011-03-09T05:50:01Z")
3 pages of van BS… GTFO \*\*\*\*\*\* > [@Mythbusters - Anyone see something that will stop 6000 page threads?](https://forums.speedlife.net/t/mythbusters-anyone-see-something-that-will-stop-6000-page-threads/37377/487): > > Were did you get your bell pattern dimensionality from? You do realize that this stuff needs to be within ~5 thousandths or you’re going to be fucking up bearings very quick right? This is not something you can just eyeball with a vernier and hope for the best on a mill. I hope you pulled the specs from a credible source. > > We’ll discuss this more when you come and get the steering rack Thurs. The chevy patten is a standardized layout from the beginning of time to the LS. chevy 90 deg they call it. I found the layouts from companies that build adapters, bell housings and such that post it. there is like a million results for the chevy pattern. the 1.8T, as anyone would assume was a lot harder. I found a guy who swapped a 1.9L into a vanagon with some domestic trans behind it. he posted the drawing. I will continue looking for more results to put confidence in it. Also we could measure out a few key points and see how they match up to the drawing. This weekend I am going away for a mini vacation. Next week I will load up the drawings in solidworks then over define it with a ton of measurements, then get the caliper out and start matching them up on the blocks to verify. as long as the crank centerline and the input shaft are dead nuts, the converter has some wiggle room, as long as the adapter is made 100% concentric too. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [March 9, 2011, 5:51am UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/462 "2011-03-09T05:51:42Z")
VW motor: [http://www.haywood-sullivan.com/vanagon/TDI/tdi\_engine\_cad\_drawing\_small.pdf](http://www.haywood-sullivan.com/vanagon/TDI/tdi_engine_cad_drawing_small.pdf) Chevy motor: [http://www.race-dezert.com/forum/attachment.php?attachmentid=14755&d=1153780010](http://www.race-dezert.com/forum/attachment.php?attachmentid=14755&d=1153780010) & [http://i17.photobucket.com/albums/b81/BRAAPZ/Rusch%20Motorsports/SBCprintCustom2.jpg](http://i17.photobucket.com/albums/b81/BRAAPZ/Rusch%20Motorsports/SBCprintCustom2.jpg) ---
**Author:** ![h0twh3els](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/h0twh3els/32/6615_2.png) [@h0twh3els](https://forums.speedlife.net/u/h0twh3els)\ **Post date:** [March 9, 2011, 6:38am UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/463 "2011-03-09T06:38:27Z")
> [@Kissmiss bash](https://forums.speedlife.net/t/kissmiss-bash/40164/27): > > A van rolling coal would be awesome Not only a van… But a handivan on bags… Dragging while rolling coal :thumbup ---
**Author:** ![h0twh3els](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/h0twh3els/32/6615_2.png) [@h0twh3els](https://forums.speedlife.net/u/h0twh3els)\ **Post date:** [March 9, 2011, 6:39am UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/464 "2011-03-09T06:39:27Z")
Oh… And talk of the van is the only realistic thing going on in this thread… So yeah, keep it going! KrazyKid, you a retart. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [March 9, 2011, 6:49am UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/465 "2011-03-09T06:49:06Z")
I am realistically going to slap my nutts across your forehead you sommmunnna bitchh ---
**Author:** ![RTrac1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rtrac1/32/6312_2.png) [@RTrac1](https://forums.speedlife.net/u/RTrac1)\ **Post date:** [March 9, 2011, 7:02am UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/466 "2011-03-09T07:02:12Z")
KK. acme adapters makes adapters for the VW engines to toyota mini truck driveline. maybe they can hook you up with a pattern. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [March 9, 2011, 7:18am UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/467 "2011-03-09T07:18:49Z")
> [@RTrac1"](#): > > KK. > > acme adapters makes adapters for the VW engines to toyota mini truck driveline. maybe they can hook you up with a pattern. good thinkin… i will contact them! thx!!! ---
**Author:** ![jdaniels](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdaniels/32/6399_2.png) [@jdaniels](https://forums.speedlife.net/u/jdaniels)\ **Post date:** [March 9, 2011, 8:16am UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/468 "2011-03-09T08:16:04Z")
I like the idea of a TDI swapped Samurai, I want one now. ---
**Author:** ![AMD\_IS\_THE\_BEST](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/amd_is_the_best/32/6342_2.png) [@AMD\_IS\_THE\_BEST](https://forums.speedlife.net/u/AMD_IS_THE_BEST)\ **Post date:** [March 9, 2011, 8:42am UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/469 "2011-03-09T08:42:36Z")
TDI Sami would be tits ---
**Author:** ![RTrac1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rtrac1/32/6312_2.png) [@RTrac1](https://forums.speedlife.net/u/RTrac1)\ **Post date:** [March 9, 2011, 8:51am UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/470 "2011-03-09T08:51:03Z")
I considered it before i did my 16v swap. too much $$$, and fuck dicking around using 2 pumps at the gas station on my way to the trail (1 for the tow rig, 1 for the trail rig) :lol ---
**Author:** ![Boxersix](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boxersix/32/6327_2.png) [@Boxersix](https://forums.speedlife.net/u/Boxersix)\ **Post date:** [March 9, 2011, 8:26pm UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/471 "2011-03-09T20:26:51Z")
> [@New bumper for WRX? ...with PICS frowning](https://forums.speedlife.net/t/new-bumper-for-wrx-with-pics/40209/8): > > VW motor: [http://www.haywood-sullivan.com/vanagon/TDI/tdi\_engine\_cad\_drawing\_small.pdf](http://www.haywood-sullivan.com/vanagon/TDI/tdi_engine_cad_drawing_small.pdf) > > Chevy motor: [http://www.race-dezert.com/forum/attachment.php?attachmentid=14755&d=1153780010](http://www.race-dezert.com/forum/attachment.php?attachmentid=14755&d=1153780010) & [http://i17.photobucket.com/albums/b81/BRAAPZ/Rusch%20Motorsports/SBCprintCustom2.jpg](http://i17.photobucket.com/albums/b81/BRAAPZ/Rusch%20Motorsports/SBCprintCustom2.jpg) SBC dimensionality I have and verified those drawings today as being correct. I have these specs already on file for the engine dyno adaptor plates at the shop. VW dimensionality looks solid, I can verify it on the mill as I have a 1.8 block down there in storage. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [March 10, 2011, 6:06am UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/472 "2011-03-10T06:06:20Z")
> [@Starting Problem 2.2L Subaru Legacy.....](https://forums.speedlife.net/t/starting-problem-2-2l-subaru-legacy/40008/15): > > SBC dimensionality I have and verified those drawings today as being correct. I have these specs already on file for the engine dyno adaptor plates at the shop. > > VW dimensionality looks solid, I can verify it on the mill as I have a 1.8 block down there in storage. Yo sir are the fucking man. I am putting the dims into SW now to test my skills. I have a 1.8T bell I can throw a caliper on to get a ball park to make sure its not totally different. I will call you in 2 hrs and meet you at the shop anyways. I also have a DVD for you. :thumbup ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [March 10, 2011, 7:13am UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/473 "2011-03-10T07:13:43Z")
take that back they do. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [March 10, 2011, 7:22am UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/474 "2011-03-10T07:22:56Z")
![http://i898.photobucket.com/albums/ac182/drag-coupe4/Mobile%20Uploads/0915001700.jpg](http://i898.photobucket.com/albums/ac182/drag-coupe4/Mobile%20Uploads/0915001700.jpg) ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [March 10, 2011, 7:56am UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/475 "2011-03-10T07:56:25Z")
![http://shift518.com/attachment.php?attachmentid=3551&stc=1&d=1299772557](http://shift518.com/attachment.php?attachmentid=3551&stc=1&d=1299772557) that helps make sense of the draw ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [March 15, 2011, 4:56pm UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/476 "2011-03-15T16:56:11Z")
back off topic… Duramax pedovan is TITS! thing rolls out big time! Makes a nice addition to my driveway until its handy capable and dumped to the pavement! Wife even approves! ---
**Author:** ![h0twh3els](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/h0twh3els/32/6615_2.png) [@h0twh3els](https://forums.speedlife.net/u/h0twh3els)\ **Post date:** [March 15, 2011, 5:02pm UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/477 "2011-03-15T17:02:34Z")
> [@Douglas the Pug](https://forums.speedlife.net/t/douglas-the-pug/39429/86): > > back off topic… > > Duramax pedovan is TITS! thing rolls out big time! Makes a nice addition to my driveway until its handy capable and dumped to the pavement! Wife even approves! You can toss some pics of it up if the ladder racks are off. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [March 15, 2011, 6:56pm UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/478 "2011-03-15T18:56:58Z")
> [@Douglas the Pug](https://forums.speedlife.net/t/douglas-the-pug/39429/87): > > You can toss some pics of it up if the ladder racks are off. ill get one in the AM of it and post it when i get to work. fucker better fit in the parking garage. 10’ 6" is what the sign said when I left this AM. ill measure it in the am too! ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [March 16, 2011, 5:51am UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/479 "2011-03-16T05:51:32Z")
BIG VAN IS BIG! needs moar low! ![http://shift518.com/attachment.php?attachmentid=3578&stc=1&d=1300279822](http://shift518.com/attachment.php?attachmentid=3578&stc=1&d=1300279822) ---
**Author:** ![Wayne64SS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne64ss/32/6365_2.png) [@Wayne64SS](https://forums.speedlife.net/u/Wayne64SS)\ **Post date:** [March 16, 2011, 6:38am UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/480 "2011-03-16T06:38:58Z")
lol seen that at my place yesterday, was definitely a nice pick-up hotwheels!! [Previous page](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265.md?page=23) [Next page](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265.md?page=25)