# Albany Speed Shop / Krazy Kid Kustoms 2004 Jetta Track Car

**URL:** https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265
**Category:** Builds
**Created:** [September 1, 2010, 6:52am UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265 "2010-09-01T06:52:49Z")
**Posts on this page:** 1
**Showing post:** 296

<div class="post-metadata">

### Author: ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)
#### Post date: [February 14, 2011, 6:25am UTC](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265/296 "2011-02-14T06:25:54Z")

</div>

> [@hey](https://forums.speedlife.net/t/hey/39633/3):
>
> 2014 here we come :rofl
> 
> sorry, had to. :lol

Mostlikly! lol

This place in NL makes a bellhousing already for the 1.8t to T9. I sent a few e-mail back and forth and they said I could use the housing they have for the T9 and Mill it down (they cast it an extra 1/4" thick) so we could make an adapter plate to mount a T5 on it.

_Right,  
Mill 1/4" off the rear The wholes for the Ford type9 box are already drilled and ofcourse the bellhousing is completly milled centrically. Sorry for unclear picture.  
BUT I would suggest you make the plate of a minimum thickness of 10 mm or max 1/2" aluminium 6061 T3 or even better 2024T3, as you must countersink some bolts.  
I add the picture of the finished productfrom wich you start the milling down. I provide you the bolts to mount the bellhousing to the VAG engine and the starter motor._

**_So another words I would mill ¼” right off the entire face of the transmission to bell housing surface, then when I make an adapter plate out of ¼” material I am back to normal dimensions transmission to block wise?_**

 

**_Also would the T9 holes and bores already be drilled into the bell housing so I can use them to base my T5 adapter off them concentrically?_**

From: Tiger Sportscars [[mailto:info@tigersportscars.nl](mailto:info@tigersportscars.nl)]  
Sent: Friday, February 11, 2011 3:30 PM  
To: Wood, Michael (OFT)  
Subject: RE: Audi 20V 1.8T to T5?

_Hi,  
I made the rear part of the bellhousing 1/4 inch extra thicker so you can make an adapter plate to it without weakening it.  
See attachment for idea’s_

---

_[View the full topic](https://forums.speedlife.net/t/albany-speed-shop-krazy-kid-kustoms-2004-jetta-track-car/254265)._