# Alex's 1993 Z28 camaro

**URL:** https://forums.speedlife.net/t/alexs-1993-z28-camaro/244476
**Category:** Builds
**Created:** [May 30, 2009, 6:06pm UTC](https://forums.speedlife.net/t/alexs-1993-z28-camaro/244476 "2009-05-30T18:06:19Z")
**Posts on this page:** 1
**Showing post:** 80

<div class="post-metadata">

### Author: ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)
#### Post date: [May 31, 2009, 5:58pm UTC](https://forums.speedlife.net/t/alexs-1993-z28-camaro/244476/80 "2009-05-31T17:58:14Z")

</div>

> [@can you put more than one router on powerlink](https://forums.speedlife.net/t/can-you-put-more-than-one-router-on-powerlink/18765/7):
>
> after reading ur valve adjustment’s , i think ur too tight 3/4 turn. i usually only goa 1/4 turn.
> 
> if there too tight it will seem ok down low. but u will drastically loose on the top. dur to valves opening to long.
> 
> on hydraulic lifters i usually bott.lifter out. not with starter but use a ratchet.  
> get lifter bottomed. hold pus rod. spinning it freely keep snugging nut till pushrods no longer turns freely then go a 1/4 turn at best. anymore and ur too tight.

woops nevermind im wrong 2

---

_[View the full topic](https://forums.speedlife.net/t/alexs-1993-z28-camaro/244476)._