# All Stock Honda \<3 Rust Build: K20A2 **URL:** \ **Category:** Builds\ **Created:** [May 11, 2010, 8:27pm UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870 "2010-05-11T20:27:39Z")\ **Posts on this page:** 20\ **Page:** 4
**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\ **Post date:** [May 15, 2010, 9:20pm UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/61 "2010-05-15T21:20:18Z")
ok i know quite a few ppl on there and could help ya out if needed ---
**Author:** ![SilverGT](https://avatars.discourse-cdn.com/v4/letter/s/8dc957/32.png) [@SilverGT](https://forums.speedlife.net/u/SilverGT)\ **Post date:** [May 15, 2010, 9:29pm UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/62 "2010-05-15T21:29:39Z")
^^ do you really? It was on [k20a.org](http://k20a.org). He’s giving me a slightly hard time, ill try to see what happens tomorow. ---
**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\ **Post date:** [May 16, 2010, 6:51am UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/63 "2010-05-16T06:51:28Z")
ya just lmk im a supporter there ---
**Author:** ![deebo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deebo/32/5218_2.png) [@deebo](https://forums.speedlife.net/u/deebo)\ **Post date:** [May 16, 2010, 8:26am UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/64 "2010-05-16T08:26:43Z")
my car is about 300hp and runs 12.8s, this thing will rip. and will probably beat a lot of cars even in stock motor form, with h/i/e/tune ---
**Author:** ![SilverGT](https://avatars.discourse-cdn.com/v4/letter/s/8dc957/32.png) [@SilverGT](https://forums.speedlife.net/u/SilverGT)\ **Post date:** [May 16, 2010, 8:53pm UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/65 "2010-05-16T20:53:01Z")
So today i feel acoomplished…Had the baby shower this weekend and that tied me up pretty much all of the weekend. but i did manage to get a good amount done. here are some updated pictures I got the D16z6 motor pulled and sold it to a member on the board. ![http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00257.jpg](http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00257.jpg) ![http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00256.jpg](http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00256.jpg) ![http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00255.jpg](http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00255.jpg) ![http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00254.jpg](http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00254.jpg) ![http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00253.jpg](http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00253.jpg) ![http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00252.jpg](http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00252.jpg) ![http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00250.jpg](http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00250.jpg) ![http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00249.jpg](http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00249.jpg) ![http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00248.jpg](http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00248.jpg) ![http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00247.jpg](http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00247.jpg) ![http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00246.jpg](http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00246.jpg) ![http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00245.jpg](http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00245.jpg) ![http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00244.jpg](http://i97.photobucket.com/albums/l212/silverdroptopgt/IMG00244.jpg) After getting the motor out, i started work on the engine bay, got all the orginial mounts in the engine bay out. started to drill out the passenger side mount, Will take out the rest of the automatic shifter lever, install the walbro fuel pump, and install theswap mounts Thats for tomorrow, then awaiting more parts to install. and i must say i cant believe im doing it outside with no garage lol…fuckin a And with every step foward theres got to be a backward step, The passenger side lower ball joint were gone so taht needs to be fixed. the rotors were warped and pads needed to be done so why not do them lol ---
**Author:** ![SilverGT](https://avatars.discourse-cdn.com/v4/letter/s/8dc957/32.png) [@SilverGT](https://forums.speedlife.net/u/SilverGT)\ **Post date:** [May 17, 2010, 9:41pm UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/66 "2010-05-17T21:41:26Z")
Got alittle things done today, Drilled out the passenger side mount…that was a bitch. Changed out the power steering hard line. Mounted the rear hybrid-racing mount Got alot more parts. DC-Sport K swap headers K swap Axles Stainless Clutch Line The downside to this day…Cant get the studs out of the mounts on the k20…i got to figure that out any suggestion 1 out of the 3 came out easily, the other 2…didnt…i tried vise grips didnt work nothing to grab on to. ---
**Author:** ![SilverGT](https://avatars.discourse-cdn.com/v4/letter/s/8dc957/32.png) [@SilverGT](https://forums.speedlife.net/u/SilverGT)\ **Post date:** [May 19, 2010, 9:42am UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/67 "2010-05-19T09:42:20Z")
Little Update not much, Sent back those horrible Hybrid-Racing Mounts Ordered my Brand New Hasport Mounts Got the studs out of the mounts on the motor and tranny. PIPE Wrench works the best! ---
**Author:** ![SilverGT](https://avatars.discourse-cdn.com/v4/letter/s/8dc957/32.png) [@SilverGT](https://forums.speedlife.net/u/SilverGT)\ **Post date:** [May 21, 2010, 10:11am UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/68 "2010-05-21T10:11:30Z")
got more parts in! Oil Pan Half Shaft Hasport Radiator Adapter but still awaiting on some very important part…motor mounts an dconversion harness i got around to installing the new oil pan and also installed the walbro fuel pump. took off the civic exhaust mounted the RSX muffler So as soon as those mounts come in i will have the motor in…then it can really start rolling. ---
**Author:** ![KhoiFish](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/khoifish/32/5409_2.png) [@KhoiFish](https://forums.speedlife.net/u/KhoiFish)\ **Post date:** [May 21, 2010, 10:31pm UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/69 "2010-05-21T22:31:15Z")
Awesome, I can’t wait to see it in the car ---
**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\ **Post date:** [May 22, 2010, 7:34am UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/70 "2010-05-22T07:34:15Z")
you going to get kpro? ---
**Author:** ![SilverGT](https://avatars.discourse-cdn.com/v4/letter/s/8dc957/32.png) [@SilverGT](https://forums.speedlife.net/u/SilverGT)\ **Post date:** [May 22, 2010, 8:37am UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/71 "2010-05-22T08:37:39Z")
I will get kpro down the line, I will have immoblizer bypass for now. ---
**Author:** ![laymone](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/laymone/32/48908_2.png) [@laymone](https://forums.speedlife.net/u/laymone)\ **Post date:** [May 22, 2010, 9:47am UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/72 "2010-05-22T09:47:13Z")
> [@SilverGT](#): > > I’m saying that would be a estimated amount of someone else doing this K20 Build…it didn’t say I was spending that much lol. How much was your build? Did you tell me 10k? 10k was the total cost of my build so far, including paint, suspension, lsd, and a brand new 5th gear set. the cost of the swap itself was less than 4k and would be about5k with kpro. the other went to the car itself ---
**Author:** ![Willybeen](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/willybeen/32/7351_2.png) [@Willybeen](https://forums.speedlife.net/u/Willybeen)\ **Post date:** [May 22, 2010, 11:00am UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/73 "2010-05-22T11:00:48Z")
what numbers are you expecting? how long do you plan on keeping this for? do you miss the mustang ever? ---
**Author:** ![SilverGT](https://avatars.discourse-cdn.com/v4/letter/s/8dc957/32.png) [@SilverGT](https://forums.speedlife.net/u/SilverGT)\ **Post date:** [May 22, 2010, 11:35am UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/74 "2010-05-22T11:35:16Z")
I’m honesty not looking for any kind of numbers. If I can do under 14sec in 1/4 miles I’m happy lol!. The only thing I miss about the mustang was the convertible aspect. it was my first car payment car so I don’t miss that hahah ---
**Author:** ![91MR2](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91mr2/32/7217_2.png) [@91MR2](https://forums.speedlife.net/u/91MR2)\ **Post date:** [May 22, 2010, 11:37am UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/75 "2010-05-22T11:37:33Z")
Should move out pretty good when done. ---
**Author:** ![SilverGT](https://avatars.discourse-cdn.com/v4/letter/s/8dc957/32.png) [@SilverGT](https://forums.speedlife.net/u/SilverGT)\ **Post date:** [May 22, 2010, 1:48pm UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/76 "2010-05-22T13:48:46Z")
I got some more stuff done, rotors, pads, and ball joints done the ac and raditor brackets been moved to the driver side. Can wait to get the mounts so I can get the engine off the engine lift. ---
**Author:** ![Saxon](https://avatars.discourse-cdn.com/v4/letter/s/59ef9b/32.png) [@Saxon](https://forums.speedlife.net/u/Saxon)\ **Post date:** [May 22, 2010, 8:39pm UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/77 "2010-05-22T20:39:58Z")
why the switch to hasport? i loved my hybrid racing mounts ---
**Author:** ![SilverGT](https://avatars.discourse-cdn.com/v4/letter/s/8dc957/32.png) [@SilverGT](https://forums.speedlife.net/u/SilverGT)\ **Post date:** [May 22, 2010, 8:53pm UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/78 "2010-05-22T20:53:12Z")
Saxon, I was gonna go hybrid but the mounts I got were older style and I got a decent deal on brand new hasport mounts. So it was within price lol. Are u running a the new style/design hybrid racing. ---
**Author:** ![Willybeen](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/willybeen/32/7351_2.png) [@Willybeen](https://forums.speedlife.net/u/Willybeen)\ **Post date:** [May 23, 2010, 7:50am UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/79 "2010-05-23T07:50:21Z")
how, in the same sentence do you use the word, break and brake… incorrectly. lol ---
**Author:** ![ieatpaint](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ieatpaint/32/7311_2.png) [@ieatpaint](https://forums.speedlife.net/u/ieatpaint)\ **Post date:** [May 23, 2010, 7:56am UTC](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870/80 "2010-05-23T07:56:52Z")
I was at a party 3 or 4 doors from your house last night, nice plate on the van haha. Who’s benzo? [Previous page](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870.md?page=3) [Next page](https://forums.speedlife.net/t/all-stock-honda-3-rust-build-k20a2/154870.md?page=5)