# Alternative to UAP camber bolts?

**URL:** <https://forums.speedlife.net/t/alternative-to-uap-camber-bolts/85205>\
**Category:** SON240sx Automotive\
**Created:** [April 21, 2005, 4:35pm UTC](https://forums.speedlife.net/t/alternative-to-uap-camber-bolts/85205 "2005-04-21T16:35:35Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Wiltzor](https://avatars.discourse-cdn.com/v4/letter/w/aeb1de/32.png) [@Wiltzor](https://forums.speedlife.net/u/Wiltzor)\
**Post date:** [April 21, 2005, 4:35pm UTC](https://forums.speedlife.net/t/alternative-to-uap-camber-bolts/85205/1 "2005-04-21T16:35:35Z")

</div>

I just put Sportlines on my S14 and need some camber bolts (the ones with the lobes in the center) to get my car aligned.

So I was just at UAP and was quoted $55.xx for 2 of these bolts! And that’s with my discount that my brother got me. Otherwise it would have been around $83!

So anyways, I just couldn’t buy these without looking to you guys for a cheaper alternative.

Any ideas?

---

<div class="post-metadata">

**Author:** ![rotorkami\_wa](https://avatars.discourse-cdn.com/v4/letter/r/e36b37/32.png) [@rotorkami\_wa](https://forums.speedlife.net/u/rotorkami_wa)\
**Post date:** [April 21, 2005, 8:20pm UTC](https://forums.speedlife.net/t/alternative-to-uap-camber-bolts/85205/2 "2005-04-21T20:20:48Z")

</div>

Ingals & eibach are all more then that… $55 is like getting them for free if they are solid 8.8 or 9.8 bolts…

---

<div class="post-metadata">

**Author:** ![boMex](https://avatars.discourse-cdn.com/v4/letter/b/7bcc69/32.png) [@boMex](https://forums.speedlife.net/u/boMex)\
**Post date:** [April 22, 2005, 6:51am UTC](https://forums.speedlife.net/t/alternative-to-uap-camber-bolts/85205/3 "2005-04-22T06:51:23Z")

</div>

Buy some of Bing’s RUCAs. They are a little bit more expensive but are well worth the extra coin and they replace the whole arm, not just the end.

---

<div class="post-metadata">

**Author:** ![Wiltzor](https://avatars.discourse-cdn.com/v4/letter/w/aeb1de/32.png) [@Wiltzor](https://forums.speedlife.net/u/Wiltzor)\
**Post date:** [April 22, 2005, 12:20pm UTC](https://forums.speedlife.net/t/alternative-to-uap-camber-bolts/85205/4 "2005-04-22T12:20:13Z")

</div>

> [@boMex](#):
>
> Buy some of Bing’s RUCAs. They are a little bit more expensive but are well worth the extra coin and they replace the whole arm, not just the end.

That’s all well and good for the rears, but what about the fronts? Is this the cheapest route? On the package they said they only adjust +/- 1 degree…is that enough?

---

<div class="post-metadata">

**Author:** ![boMex](https://avatars.discourse-cdn.com/v4/letter/b/7bcc69/32.png) [@boMex](https://forums.speedlife.net/u/boMex)\
**Post date:** [April 25, 2005, 6:38am UTC](https://forums.speedlife.net/t/alternative-to-uap-camber-bolts/85205/5 "2005-04-25T06:38:25Z")

</div>

Yeah for the fronts the bolts would be the cheapest way. The better way (and more expensive way) is camber plates. At that point you are better off to just run a coilover.

---

<div class="post-metadata">

**Author:** ![DTS](https://avatars.discourse-cdn.com/v4/letter/d/8491ac/32.png) [@DTS](https://forums.speedlife.net/u/DTS)\
**Post date:** [April 25, 2005, 2:00pm UTC](https://forums.speedlife.net/t/alternative-to-uap-camber-bolts/85205/6 "2005-04-25T14:00:12Z")

</div>

a little bit on - camber up front isnt that bad